- New
Motor driver expansion board X-NUCLEO-IHM08M1 for STM32 Nucleo
Index: FAR-15166
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
ELECTRONICS - Strona 55
Loading...
Lanberg Ethernet Patchcord UTP 5e 2m - black
Cable - twisted pair from the 5e Ethernet category in black colour with installed RJ45 plugs with the length of 2 meters.
Index: KAB-12852
Index: KAB-12852
Cable HDMI 2.0 Lanberg 4K - 0,5m
The HDMI cable allows you to connect your multimedia devices together. It supports the 4 K UHD standard to ensure the highest quality of transmitted video and audio.
Index: IMP-14924
Index: IMP-14924
JST SH 6 PIN 30cm female cable - Pololu 4763
Female 6-pin JST PH cable with a 1 mm grid . The cable thickness is 28 AWG. Cable length 30 cm , used e.g. to connect Polol magnetic encoders.
Index: PLL-17158
Index: PLL-17158
ESP32-C3-Zero-M - WiFi/Bluetooth development board - with headers - ESP32-C3FN4 - Waveshare 25532
ESP32-C3-Zero-M is a compact development board based on the ESP32-C3FN4 chip, offering wireless communication via WiFi and Bluetooth Low Energy. It is equipped with a...
Index: WSR-23870
Index: WSR-23870
Index: UCC-00094
Multiple optocoupler LTV847 - THT - 5pcs.
4-channel optocoupler, replacement for PC847. Transistor output. Maximum voltage 35 V. Housing: DIL16.
Index: UCC-00390
Index: UCC-00390
26-pin (2 x 13) straight plug for printing (pitch: 2.54 mm). Price is for 5 pieces.
Index: KAB-01571
Index: KAB-01571
Validator Acceptor of Coins - 3 types of coins - SparkFun COM-11719
Coin acceptor allows you to create a device, of which action will depend on putting coin. Validator supports three types of coins, kinds of which can be easily programmed using...
Index: SPF-01985
Index: SPF-01985
Raspberry Pi camera ribbon wire - 60cm 15 wires 1mm raster
Tape with a length of 60 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-02440
Index: RPI-02440
IDC 10 pin female-male cable for printing - 30cm
Universal female cable with the length of 30 cm, ended with the 10-pin IDC female slot and male plug for printing, pitch of 2.54 mm. The cable can be used, for example, to...
Index: KAB-02568
Index: KAB-02568
Switch ON-OFF momentary, square 250V/1A - red
Switch with a square attachment with the contact's loading capacity of 1 A for 250 V or 3 A for 125 V.
Index: UCC-03050
Index: UCC-03050
Power module for micro ProtoPower breadboard - 3.3V 5V
Power module for a breadboard. It is supplied with a power supply or a phone charger via microUSB socket . It has a built-in stabilizer 3.3 Volts, and a switch that allows you...
Index: MSX-04554
Index: MSX-04554
Switch ON-OFF momentary, round 250V/3A - red
Switch with a round attachment with the contact's loading capacity of 3 A for 250 V. Items are sold in sets of 10 pieces.
Index: UCC-05268
Index: UCC-05268
Round neodymium magnet - 10x4mm - 5pcs
Round neodymium magnet with dimensions 10 x 4 mm. Neodymium magnets are characterized by a very high attraction force due to a very high energy density, much higher than...
Index: MAG-05723
Index: MAG-05723
Connector for LED strip 10mm 4 pin - with wire
Connector that allows to connect two LED strips with a width of 10 mm. It has four pins. Works with RGB LED strips. Cable length is 16 cm
Index: LED-06479
Index: LED-06479
LED RGB strip driver with IR remote - 20 keys
A module that allows you to control the brightness of monochrome panel with LED backlight and brightness and LED RGB color panel. It has lots of preset functions. Equipped with...
Index: LED-06484
Index: LED-06484
- Reduced price
- Promotion
Strain relief boots for RJ45 8P8C wire - yellow - 10pcs
Rubber strain relief boots for plugs RJ45 (8P8C), in yellow. Price for 10 pieces.
Index: KAB-06669
Index: KAB-06669
DFRobot Gravity: Non-contact Liquid Level Sensor
The sensor determines the liquid level without dipping into the liquid. Due to the lack of contact with the liquid, the module is suitable for level measurement of hazardous...
Index: DFR-06931
Index: DFR-06931
13.56MHz RFID/NFC Keychain Fob - 10pcs
The RFID/NFC identifier in the form of a keychain. Each chip has a unique 32-bit code. The device works at a small distance from the reader, the carrier frequency is 13.56 MHz...
Index: MOD-07052
Index: MOD-07052
Matrix LED 8x8 + driver MAX7219 - small 32x32mm with wires
Matrix module consisting of 64 LEDs arranged in an 8 x 8 square. The set consists of the board with built-in controller and martix as well as female-female wires.
Index: MOD-07798
Index: MOD-07798
A set of 200 resistors with the 1 W power. Elements are in the through hole THT case.
Index: PAS-08280
Index: PAS-08280
Car fuse, size Midi (19 mm) with the value of 20 A. The kit contains 10 pieces.
Index: KAB-08814
Index: KAB-08814
ON-OFF switch monostable - PBW-12B - 2A 250V flat
The monostable flat switch with the load capacity of the contacts: 2 A for 250 V.
Index: NSZ-09793
Index: NSZ-09793
Mini limit sensor switch with lever - WK615 - 5pcs.
Limit switch with lever length 55 mm . The maximum operating parameters are 250 V and 5 A current.
Index: AKS-10825
Index: AKS-10825