- New
- Sale
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 100
Loading...
LED indicator 230V AC - 28mm - red with a buzzer
LED light, operating voltage 230 V AC. It has a diameter of 28 mm.
Index: LED-09017
Index: LED-09017
Switch ON-ON circular pedal 250V/10A - 100mm
Round, monostable switch is designed to be controlled by the leg. Diameter is equal to 100 mm and height is 35 mm. It provides you the power off without having to remove the...
Index: UCC-09339
Index: UCC-09339
DFRobot Gravity - colorful RGB LED module
LED module lights up in the seven colors of the rainbow. The controller randomly chooses the color. Modules may be connected in a cascade, one interface can control all the...
Index: DFR-09382
Index: DFR-09382
Power supply for LED strips - 12V / 16,7A / 200W
Stable, switched-mode, industrial power supply for powering LED strips. Voltage: from 110 V to 220 V. Output voltage: 12 VDC. Output current:16,7 A. Equipped with a terminal...
Index: ZAS-09651
Index: ZAS-09651
ON-OFF bistable switch - PBW-16AS - 2A 250V convex
Bistable convex button with a loading capacity of contacts: 2 A for 250 V.
Index: NSZ-09795
Index: NSZ-09795
Safety switch ON-OFF mushroom - 23mm
The "mushroom" safety switch with a loading capacity of contacts: 5 A for 250 V.
Index: NSZ-09799
Index: NSZ-09799
Monostable array switch - PT-29R - 10A 440V NC 0
Monostable NC panel switch, contact load 10 A for 600 V. Key marking "0".
Index: NSZ-09803
Index: NSZ-09803
Arcade Concave Button 3,5cm - yellow - SparkFun COM-09338
Concave button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.
Index: SPF-10080
Index: SPF-10080
GSM antenna 3dB SMA male - self-adhesive
Antenna working in the GSM band with a SMA male connector. It works with the frequency of 433 MHz. The power gain is 3 dB. It has a layer of self-adhesive tape. Dimensions: 116...
Index: AKS-10139
Index: AKS-10139
DFRobot Capacitive Touch Kit - a touch kit for Arduino
A kit for self-assembly of the capacitive touch for Arduino. The set consists of three styles of touch sensors: round in the style of iPod; touch keyboard that supports...
Index: DFR-10172
Index: DFR-10172
CSI / DSI Extender Thingy for Raspberry Pi camera/display tapes - Adafruit 3671
The board is a great tool that allows you to extend the tape 15-pin pitch of 1 mm CSI for camera or DSI display Raspberry Pi.
Index: ADA-10318
Index: ADA-10318
Photoelectric sensor SPDT E3JK-R4M1 12V IP65 - 4m
Photoelectric transmitting sensor. It detects the objects by the method of reflection. Detection range is up to 4 meters. It has Light-ON operation mode. It is powered with...
Index: AKS-10610
Index: AKS-10610
H3LIS331DL 3-axis accelerometer - module - SparkFun SEN-14480
Sensor H3LIS331DL is a 3-axis digital accelerometer. It allows you to measure acceleration in the configurable ranges. It communicates via the I2C or SPI bus, powered from...
Index: SPF-10870
Index: SPF-10870
Module with sensor BME680 from Bosch, it includes measurement of temperature, humidity, pressure and gases. It is able to measure humidity from 10% to 90% RH , pressure from...
Index: ADA-10872
Index: ADA-10872
Filament Spectrum HIPS-X 1.75mm 1kg - Deep Black
Filament made of HIPS used as a cartridge for 3D printers. The diameter is 1.75 mm. The set includes 1kg of filament in the color Deep Black. It requires a heatbed. It is a...
Index: SPC-11049
Index: SPC-11049
Module with green LED, it is equipped with a Gravity connector, it is ideal for working with Arduino. The LED glows, when the pin signal switches to a low state.
Index: DFR-11270
Index: DFR-11270
DFRobot Gravity - DS18B20 temperature sensor
Digital temperature sensor DS18B20 with the Gravity interface compatible with Arduino. It works in the range from -55 °C to 125 °C. It is powered with the voltage from 3.3 V...
Index: DFR-11281
Index: DFR-11281
RFiD keychain - 125kHz - 5 pcs set.
The set of RFID identifiers in the form of keychains and two cards. Each chip has a unique code. The device works at a distance of 2 - 5 cm from the reader , the carrier...
Index: SEE-11288
Index: SEE-11288
Grove - ITR9909 reflectance sensor v1.2
Module from the Grove series is based on a reflective sensor ITR9909. It consists of LED emitting the infrared light and phototransistor of high sensitivity. It is supplied...
Index: SEE-11325
Index: SEE-11325
Grove - LCD display 2x16 characters with RGB backlight
LCD display 2x16 characters with backlight in any color palette RGB. Communicates with the two-wire I2C bus. It is supplied with the voltage from 3.3 V to 5 V. T he kit...
Index: SEE-11326
Index: SEE-11326
A simple tilt sensor with digital output. It operates from 3.3V to 5V and works with Arduino and Raspberry Pi modules.
Index: SEE-11358
Index: SEE-11358
DragonTail - adapter for contact plate for BBC micro:bit - Adafruit 3695
Adapter to connect modules Micro:bit to breadboard. It facilitates adding sensors, motors, buttons, LEDs, etc. The module dimensions are 57 mm x 53.5 mm x 19 mm .
Index: ADA-11420
Index: ADA-11420
Programmer USB AVR Pololu v2.1 - microUSB 3,3V/5V - Pololu 3172
Pololu programmer compatible with with the popular STK500. It can be used to program AVR microcontrollers via the microUSB cable. Version 2 is equipped with two connectors...
Index: PLL-11452
Index: PLL-11452
Camera ArduCam Sony IMX219 8MPx M12 mount - night with lens LS-1820 - for Raspberry Pi
Camera module with sensor Sony IMX219 equipped with a lens LS-1820 - NOIR " to work in the day and at night. It connects into a special connector on a minicomputer Raspberry...
Index: ACM-11723
Index: ACM-11723