- New
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Sale
- Sale
ELECTRONICS - Strona 118
Loading...
Rotary switch 4-position 3 circuits - 60mm
Rotary switch, 6-state for the case, equipped with 15 contacts. The total height is 60 mm.
Index: UCC-06153
Index: UCC-06153
Rotary switch 12-position 1 circuits - 60mm
Rotary switch, 12-state for the case, equipped with 13 contacts. The total height is 60 mm.
Index: UCC-06154
Index: UCC-06154
Rotary switch 8-position 1 circuit - 30mm
Rotary switch, 8-state for the case, equipped with 9 contacts. The total height is 29.5 mm.
Index: UCC-06162
Index: UCC-06162
Low-Power LM393P dual-channel comparator - THT DIP8 - 5pcs
Comparator LM393 with supply voltage from 2 V to 36 V. The response time is 300 ns. 5 units are included.
Index: UCC-06265
Index: UCC-06265
Eight-segment display x1 - 14mm red - common anode
Single 8-segment display of digits with points and some characters.
Index: LCD-06438
Index: LCD-06438
Humidity and Temperature Sensor Breakout - Si7021 - SparkFun SEN-13763
Humidity and temperature sensor powered by the voltage from 1.9 V to 3.6 V with I2C interface. The measurement of temperature is from -10°C to 85°C, humidity from 0 to 80% RH.
Index: SPF-06554
Index: SPF-06554
- Sale
2,54 mm - socket housing 4-pin - 5pcs.
4-pin socket housing for cable, 2.54 mm pitch. Set includes 5 4-pin housings.
Index: KAB-06782
Index: KAB-06782
OpenScale - strain-gauge bridge ATmega328P - SparkFun SEN-13261
Module for measuring the weight and temperature. It is used to read data from the strain-gauge sensors. It allows for calibration, setting the sampling frequency and accuracy....
Index: SPF-07276
Index: SPF-07276
- Sale
FeatherWing radio module RFM69 433MHz - pad for Feather - Adafruit 3230
The module from the Feather family is equipped with a 433 MHz RFM69 long-range radio module. It allows data transmission at a distance of up to 500 m , using a piece of...
Index: ADA-07290
Index: ADA-07290
Inductance: 1 mH. Maximum current: 40 mA. Resistance: 33 Ω. Dimensions: 3 x 7 mm. Price for 10 pieces.
Index: PAS-07966
Index: PAS-07966
Adapter DC 5,5/2,1mm with switch - 2 plugs
Branch joint with one female 5,5 / 2,1 mm slot and the two male 5.5 / 2.1 mm plugs. It has the switch mounted on the cable. It can be used, i.a. to supply many LED strips from...
Index: KAB-08135
Index: KAB-08135
10-segment LED Bar Display OSX10201-RGG1
10-segment LED display, the range of colors is 4 x red and 6 x green. It can be used for example as a temperature gauge or liquid level.
Index: LED-08172
Index: LED-08172
PN532 NFC/RFID 13,56MHz I2C/SPI module + card and a keychain
Board allows you to read and save data from RFID devices at 13.56 MHz frequencies. It also works with the NFC protocol. The module is based on PN532 system, it is powered with...
Index: MOD-08240
Index: MOD-08240
Antenna WiFi 6dBi U.FL for LattePanda
WiFi antenna 6 dBi with a U. FL connector allowing to connect it to the minicomputer LattePanda.
Index: DFR-08364
Index: DFR-08364
Literal markers for cable 5mm - 1300pcs
Set for marking wires with a diameter of 5 mm. Contains 50 pieces of markers with letters from A to Z in orange.
Index: KAB-08522
Index: KAB-08522
DFRobot Gravity cables - wires for Gravity and LattePanda sensors 10pcs
Wires are used to connect sensors from Gravity series or actuators with a minicomputer Latte Panda, compatible with most gravitational sensors. They are very simple to connect...
Index: DFR-08829
Index: DFR-08829
LED indicator 12V DC - 8mm - yellow
LED light, working voltage 12 V DC. It has a diameter of 8 mm.
Index: LED-08987
Index: LED-08987
LED indicator 230V AC - 28mm - blue
LED light, operating voltage 230 V AC. It has a diameter of 28 mm.
Index: LED-09016
Index: LED-09016
LED indicator 24V DC - 28mm - red with a buzzer
Indicator light operating at 24 V DC. It has a diameter of 28 mm.
Index: LED-09020
Index: LED-09020
PiUART - USB - USB-UART converter for Raspberry Pi - Adafruit 3589
Miniature shield for Raspberry Pi which is also a converter of USB-UART. Connected directly to GPIO pins. The module also has a power switch. It is compatible with Raspberry Pi...
Index: ADA-09816
Index: ADA-09816
Muscle Wire metal alloy with shape memory - 0.03mm - SparkFun COM-11900
Muscle Wire is a wire made of an alloy of nickel and titanium with the shape memory. It can be bent and model when it is in the martensitic form, it will return to the original...
Index: SPF-10086
Index: SPF-10086
Thread Bobbin - 12m - SparkFun DEV-13814
Spool with the smooth conductive thread. The thread is made of stainless steel fiber and wound on a plastic reel. The thread has a resistance of 27 Ω per meter. Price...
Index: SPF-10102
Index: SPF-10102
Piezoelectric sensor of vibration with mass - SparkFun SEN-09197
Piezoelectric vibration sensor, used for measurements of touch, vibrations, hits and flexibility. A small AC voltage and high voltage of up to 90 V, it occurs when the foil...
Index: SPF-10116
Index: SPF-10116
Step-Up/Step-Down Voltage Regulator S9V11MA - 2,5-9V 1,5A - Pololu 2869
Miniature boost converter module supplied with voltage from 3 V to 16 V . Output voltage adjustable from 2,5 V to 9 V. Maximum current 1,5 A. Dimensions: 15 x 13 x 6 mm....
Index: PLL-10672
Index: PLL-10672