- Reduced price
- Sale
- Sale
- Sale
ELECTRONICS - Strona 119
Loading...
ON-OFF switch monostable - PBW-12BPW - 2A / 250V - flat red / green
A flat monostable switch with green/red backlight. Contact load is 2 A for 250 V.
Index: AKS-10803
Index: AKS-10803
ON-OFF switch monostable - PBW-12BPW - 2A / 250V - flat red
A flat monostable switch with the red backlight. Contact load is 2 A for 250 V.
Index: AKS-10804
Index: AKS-10804
ON-OFF switch monostable - PBW-12BPW - 2A / 250V - green
A salient, monostable switch with the green backlight. Contact load is 2 A for 250 V.
Index: AKS-10807
Index: AKS-10807
ON-OFF bistable switch - PBW-16APS - 2A 250V - flat red round
Flat bistable button with red illumination in the form of the ring. Contact load is up to 2 A for 250 V.
Index: AKS-10813
Index: AKS-10813
ON-OFF switch monostable - PBW-16BPW - 2A 250V - green / red
Monostable salient switch with the green/red backlight. Contact load is 2 A for 250 V.
Index: AKS-10821
Index: AKS-10821
DFRobot Gravity - analogue meter of the sound level
The sound level meter is compatible with Arduino. For measurements, it uses the circuit instrument and the microphone with a low noise level that allows to accurately measure...
Index: DFR-10832
Index: DFR-10832
Feather Huzzah ESP32 - WiFi module, Bluetooth GPIO - soldered connectors - Adafruit 3591
The wi-fi module and Bluetooth, based on the system ESP32. On board is 8 GPIO ports with support for I2C and SPI, analog input and a connector with a 3.7 V lipol battery. It...
Index: ADA-10874
Index: ADA-10874
Ribbon cable 14 colored wires IDC raster 1.27 mm - roll 30.5 m
IDC 14 core ribbon cable. Raster: 1.27 mm. Roll: 30,5 m .
Index: AKS-10948
Index: AKS-10948
Filament Spectrum PETG 1.75mm 1kg - Arctic White
Filament made of PETG is used as a cartridge for 3D printers . The diameter is 1.75 mm. The set includes 1kg filament in color Arctic White, length of approx. 340 m. It...
Index: SPC-11047
Index: SPC-11047
Filament Spectrum PETG 1,75mm 1kg - Silver Star
Filament made of PETG is used as a cartridge for 3D printers. The diameter is 1.75 mm. The set includes 1kg filament in color Silver Star, length of approx. 340 m. It requires...
Index: SPC-11050
Index: SPC-11050
Filament Spectrum PETG 1,75mm 1kg - Lion Orange
Filament made of PETG is used as a cartridge for 3D printers. The diameter is 1.75 mm. The set includes 1kg filament in color Lion Orange, length of approx. 340 m. It requires...
Index: SPC-11053
Index: SPC-11053
DFRobot Gravity - digital crash sensor (left)
The module is equipped with limit switch with lever with roller is designed for Arduino. It is supplied with the voltage of 5 V.
Index: DFR-11265
Index: DFR-11265
DFRobot Gravity - digital crash sensor (right)
The module is equipped with limit switch with lever with roller, it is designed for Arduino. It is powered with the voltage of 5 V.
Index: DFR-11266
Index: DFR-11266
DFRobot Gravity - digital magnetic field sensor
Digital magnetic sensor can detect the magnetic object near it. The supply voltage is from 3.3 V to 5 V.
Index: DFR-11274
Index: DFR-11274
DFRobot Gravity - mini PIR motion detector
Digital PIR motion sensor for Arduino and Raspberry Pi. The module allows you to detect motion in the range of its operation, up to 7 meters. The sensor is powered with the...
Index: DFR-11275
Index: DFR-11275
Grove - Button - module with a button
The control module from a Grove series. It has a built-in tact-switch system and pull-down resistor. It communicates with the microcontroller through a digital signal.
Index: SEE-11297
Index: SEE-11297
Grove - RPR-220 reflectance sensor v1.3
Grove series module based on the RPR-220 reflective sensor . It consists of an infrared light emitting diode and a high-sensitivity phototransistor. It is powered by 5 V....
Index: SEE-11323
Index: SEE-11323
Grove - SI1151 solar light sensor v2.0
The Grove module based on the SI1151. Multi-channel, digital light sensor to detect visible light and infrared light. It is working with voltage from 3 V to 5.5 V. It...
Index: SEE-11353
Index: SEE-11353
Filament Spectrum Smart ABS 1,75mm 1kg - Dragon Red
Filament made of Smart ABS, used as a cartridge for 3D printers. The diameter is 1.75 mm. The set includes 1kg of filament in Dragon Red color. It requires a heatbed.
Index: SPC-11448
Index: SPC-11448
Filament Spectrum PLA Pro 1,75mm 1kg - Lime Green
Filament made of PLA-Pro used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg of filament in the color Lime Green.
Index: SPC-11478
Index: SPC-11478
Camera ArduCam Sony IMX219 8MPx CS mount - night with lens LS-1820 and IR-CUT - for Raspberry Pi
Camera module with sensor Sony IMX219 equipped with a lens LS-1820-NOIR, IR-CUT, enabling work in day and night. It connects into a special connector on a minicomputer...
Index: ACM-11697
Index: ACM-11697
Kradex Z128JpH TM ABS-PC plastic case with brass sleeves IP65 - 105x70x40mm light gray-transparent
2-part, airtight, universal case with a seal for the electronic circuit and brass sleeves. It has a transparent cover. External dimensions 105 x 70 x 40 mm.
Index: KDX-11995
Index: KDX-11995
Big Push Button 6cm - blue - inclined
Big flat button with an outer diameter of 6 cm with the built-in LED illuminating the dome.
Index: DNG-12298
Index: DNG-12298
DFRobot Gravity - 2x16 I2C LCD display - gray
LCD display 2x16 characters with backlight in gray color. Communicates via two-wire I2C bus. The set includes a cable adapted to the DFRobot Gravity IO Expansion Shield.
Index: DFR-12364
Index: DFR-12364