ELECTRONICS - Strona 120
L3GD20H 3-axis, digital I2C SPI gyroscope - Pololu 2129
Sensor to measure the angular velocity in three axes. It works in the range of up to ±240 °/s, ±500 °/s or ±2000 °/sec. It communicates via the I2C or SPI bus, it has the...Buzzer without generator 3-16V 14mm - THT
Buzzer without generator about 14 mm in diameter. Voltage supply range from 3 V to 16 V.Monochrome graphical OLED display 0,96 '' 128x64px - I2C/SPI - Adafruit 326
Small monochrome OLED-display with a diagonal of 0.96" and a resolution of 128 x 64. Characterized by high contrast. The device works with voltages of 3.3 V and 5 V,...Sensor for measuring heart activity - AD8232 - SparkFun SEN-12650
Module for measuring electrical activity of the human heart. The output is an analog signal which can be saved as EKG. The sensor is easy to operate, the manufacturer provides...DRV8835 dual - 2-channel motor driver 11V/1,2 A - Shield for Arduino - Pololu 2511
Dual channel DRV8835 module operates with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). The chip can be connected directly to Arduino board.DRV8835 - two-channel 11V / 1,2A engine controller - overlay for Raspberry Pi - Pololu 2753
Module with two-channel circuit DRV8835 operating with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). It can be connected directly to the GPIO...DRV8838 - single-channel motor controller 11V/1,7A - Pololu 2990
Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 1.8 A). Supply voltage up to 11 V.MicroSD card reader module - Pololu 2597
Reader module of the microSD cards from the Pololu with goldpin connectors - 2.54 mm pitch for self-soldering. It communicates with main board via SPI interface, it operates...Connection cables Female-female without terminals 35cm - 40pcs
Set includes 40 pcs of colorful connection cables, 35 cm in length, is ended on both sides with the female connector without the plastic shield. The wires can be connected in...nRF905 433/868/915MHz radio module - THT transceiver with antenna
Radio module (transmitter and receiver) operating in 433 MHz band with SPI communication interface. Powered by 2.7 V - 3.3 V, the outputs are goldpin connectors. It has an...Female SMA - U.FL adapter - 10cm - SparkFun WRL-09145
Adapter for 2.4 GHz U.FL - SMA (female) antenna connectors , 10 cm long.Active buzzer module with generator - black - Iduino ST1143
Module with buzzer with a generator, allows you to generate audio signals with a constant signal voltage. Board in black.Stepper motor driver A4988 RepRap - green
Stepper motor driver based on the A4988 system. Voltage supply in the range from 8V to 35 V, with maximum current consumption of 1 A per coil. Maximum resolution: 1/16 of a...Step-Down Voltage Regulator D24V10F6 - 6V 1A - Pololu 2832
A step-down pulse inverter module with an efficiency of 80 % - 93 %. Converts the input voltage from 6.1 V to 36 V to a 6 V output value. The maximum continuous current is 1 A.Connecting female-female cables 20cm colored - 50pcs.
Set of 50 high-quality connecting cables with a length of 20 cm in different colours.Heart rate monitor - SparkFun SEN-11574
Module for measuring the human heart rate, compatible with Arduino. It is working with the voltage from 3 V to 5 V, the output is the analog signal. The kit includes a probe...Thermometer with LCD display from -50 °C to 100 °C - white
Digital thermometer for mounting on a panel, the LCD display. It works in the range from -50 °C to 100 °C. The probe is on a wire with a length of 1 m. The device is powered by...Step-Down Voltage Regulator D24V5F1 - 1,8V 0,5A - Pololu 2840
A step-down pulse inverter module with an efficiency of 80 % - 93 %. Converts the input voltage from 3 V to 36 V to an output value of 1.8 V. The maximum continuous current is...Step-Down Voltage Regulator D24V5F2 - 2,5V 0,5A - Pololu 2841
A step-down pulse inverter module with an efficiency of 80 % - 93 %. Converts the input voltage from 3 V to 36 V to an output value of 2.5 V. The maximum continuous current is...Magnetic sensor to open door/window - reed contact CMD19
Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 19 x 23 mm.Step-Down Voltage Regulator D24V25F3 - 3,3V 2,5A - Pololu 2849
Step-down converter with 3.3 V output voltage. The maximum current is 2.5 A. The supply voltage is in the wide range from 4.5 V to 38 V. The module dimensions are 18 x 18 mm.Step-Down Voltage Regulator D24V25F9 - 9V 2,5A - Pololu 2854
Step-down converter with an output voltage of 9 V. The maximum input current depends on the input voltage and load. The supply voltage is in a wide range from 10.5 V to 38 V....Microphone 36-38dB 6/2,7mm - THT - 10pcs.
Height h: 2,7 mm. Diameter Ø: 6 mm Sensitivity: 36 - 38 dB. Pins - pitch: 1.8 mm.Touch button AT42QT1010 - SparkFun module SEN-12041
A module made by SparkFun with a capacitive touch button based on AT42QT1010 system. It is powered with the voltage in the range from 1.8 V to 5 V. It has a digital output...
