- New
- New
- New
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 121
Loading...
Male plug cables - crocodile - 10pcs
Set of 10 wires. On one side is a standard male plug (goldpin plug), on the other end is the crocodile connector.
Index: KAB-01245
Index: KAB-01245
IDC 14 pin female-female cable - 30 cm
Universal female cable with the length of 30 cm, ended with 14-pin IDC slots with the pitch of 2.54 mm(standard goldpin) which can be used to create different connections.
Index: KAB-01247
Index: KAB-01247
Step-Down Voltage Regulator D24V6F3 - 3,3V 0,6A - Pololu 2106
Step-down converter with 3.3 V output voltage. Maximum current up to 600 mA. Supply voltage in the range 3.8 V - 42 V.
Index: PLL-01332
Index: PLL-01332
Breadboard - 810 holes with connectors
Breadboard with male connector with leads for power connection. It are has 810 holes for inserting chips and modules.
Index: PLY-01374
Index: PLY-01374
Splitter Wire for Servos Y - 30 cm (JR)
Wire splitter for servos with length of 30 cm. The wire allows you to connect two servos to one input of the controller.
Index: KAB-01389
Index: KAB-01389
Step-Up Voltage Regulator Boost - 2,5-9,5V 2A - Pololu 791
Converter with adjustable output voltage from 2.5 V - 9 V. Maximum current up to 2A. Input voltage 1.5 V - 9.5 V.
Index: PLL-01425
Index: PLL-01425
Set of breadboard 830 + 140 jumper wires
Contact plate 830 hole (pitch 2.54 mm) with a set of 140 jumper wires, to facilitate connection. Relief in the design of striped (blue and red), denoting the polarity of the...
Index: PLY-01504
Index: PLY-01504
DC plug 5,5/2,1mm with quick connection
DC φ5.5 x 2.1 mm plug with connector allowing you to mount the cable with a screwdriver.
Index: KAB-01590
Index: KAB-01590
MSX FT232RL - USB-UART FTDI 3,3/5V converter
The converter allows for communication between USB and UART interfaces. It allows to exchange data between PC and board with microcontroller. The module is based on...
Index: MOD-01611
Index: MOD-01611
ACS711EX current sensor ACS711EX -15A to + 15A - Pololu 2452
Current sensor working in the range of +/-15 A based on the Hall effect. The output is an analog voltage. Supply voltage is from 3.0 V to 5.5 V.
Index: PLL-01690
Index: PLL-01690
Helping hand - Holder with magnifying glass and LED backlight - ZD-126-2
Easy and convenient holder with magnifying glass x3.5 diopters, clips, spring for the soldering iron, spot for tip cleaner and LED backlight.
Index: NSZ-01712
Index: NSZ-01712
Trim with QTR-3A reflective sensors - analog - Pololu 2456
Compact bar with three reflective sensors with the size of 32 x 8 mm. It has analog outputs, it is powered with the voltage of 5 V.
Index: PLL-01730
Index: PLL-01730
The sensor is used to detect precipitation. It is powered with the voltage of 5 V. It has digital and analog output, making it compatible with most of the commissioning...
Index: MOD-01732
Index: MOD-01732
Reflectance sensor KTIR0711S - with connectors
Module with reflective sensor KTIR0711S powered with the voltage of up to 5 V. It is characterized by small dimensions: 9 x 14 mm. It has soldered goldpin connectors.
Index: MOD-01744
Index: MOD-01744
Breadboard - 830 holes transparent
Breadboard is used to create and test electronic circuits without soldering. Version with 830 fields, sized 165 x 53 mm in a transparent case . B lue and red stripes, marking...
Index: PLY-01763
Index: PLY-01763
Cable with an angled DC 2,1/5,5mm plug
2-vein cable with the length of 1.15 m with the angular DC 2,1 / 5,5 mm plug.
Index: KAB-01830
Index: KAB-01830
Plug DC 5,5/2,1mm with cable 1,5m
2-vein cable with the length of 1,5 meter with the straight DC 5,5 / 2,1 mm plug.
Index: KAB-01831
Index: KAB-01831
Optotriac MOC3041 400V/1A - THT
The driver is designed to work with mains voltage. Voltage Vdrm: 400 V; current It: 1 A. type of case: DIP-6 . It has a built-in module switch in zero.
Index: UCC-01874
Index: UCC-01874
IDC 10 female cable - female pins
Cable with the length of 25 cm, on the one side, it is ended with 10-pin female slot - IDC with the pitch of 2.54 mm, on the other with the free female cables.
Index: KAB-01922
Index: KAB-01922
Cable, adapter 3x1 JST, 2mm raster - BLS 2.54mm raster - 5pcs.
Cable, adapter with plug, pitch of 2 mm and the female connector 3x1, 2.54 mm pitch. It is compatible with analog Sharp distance sensors. The cable length is min. 30 cm.
Index: KAB-01923
Index: KAB-01923
Transistor N-MOSFET IRLZ44N - THT - 5pcs
Vds: 55 V. Id: 47 A. Rdson: 0,022 Ohms. Case: TO-220. Items are sold in sets of 5 pieces.
Index: UCC-01950
Index: UCC-01950
Female socket 1x10 raster 2,54mm for Arduino - 5pcs
10-pin female connector strip is used in the Arduino Uno and Leonardo. Raster: 2.54 mm. Price for 5 pcs of connectors.
Index: UCC-01991
Index: UCC-01991
Solenoid Valve 12V - 3/4'' - SparkFun ROB-10456
The device supports control of fluid flow using a computer or microcontroller. The valve is powered by a voltage of 12 V.
Index: SPF-01993
Index: SPF-01993
A4988 Black - stepper motor driver RepRap 35V/2A - Pololu 2128
Stepper motor driver based on the A4988 chip. Powered by a voltage range of 8 - 35 V, with a maximum current consumption of 2 A per coil. Maximum resolution: 1/16th of a step....
Index: PLL-02000
Index: PLL-02000