Servomechanisms can be found in many different devices. The main task of servos is to eliminate adjustment errors and control various components - e.g. production machines, but of course not only.
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
Servo - continuous 360° operation
Products: 18
Loading...
Servo Feetech FT90R - micro - continuous 360 degrees
Servo type micro. Power voltage range: 4.8 V to 6 V. Speed: 6 V: 170 rpm Torque: 1.5 kg*cm Dimensions: 22,9 x 12,1 x 26.5 mm Weight: 9 g
Index: FTC-10846
Index: FTC-10846
TowerPro SG90-HV micro - digital servo - 360 degrees
Digital micro servomechanism with a movement range from 0° to 360° . Perfect for miniature applications related to robotics, modeling and DIY. It offers a torque of 1.6...
Index: DNG-24407
Index: DNG-24407
20KG Bus Servo Motor - servo motor with 360 degree magnetic encoder - Waveshare 25127
The Waveshare Bus Servo Motor is a servo with a magnetic encoder that allows a full 360-degree rotation range. Any angle can be used as the center of the position, and...
Index: WSR-23725
Index: WSR-23725
Servo PowerHD LF-20MG-360 standard - continuous rotation
Digital servo of standard type with aluminum gears and ball bearings. The power voltage from 4.8 V to 6.0 V Operates as a variable speed motor. Speed: 0.16 s./60°....
Index: MOT-08405
Index: MOT-08405
SC15 17kg Serial Bus Servo - UART servo - Waveshare 21568
SC15 17 kg Serial Bus Servo is a programmable high torque 17 kg * cm servo. It has a 180 ° rotation range in servo mode and a full 360 ° rotation range in motor mode. Any...
Index: WSR-21965
Index: WSR-21965
Servo Feetech FS5109R - standard continuous 360 degrees
Standard servo. The power voltage from 4.8 V to 6 V. Operates as a variable speed motor. Speed: 0.16 s/60°. Torque: 10.2 kg*cm Dimensions: 40.8 x to 20.1 x 38.0 mm...
Index: FTC-09173
Index: FTC-09173
Servo RDS3115 360° continuous rotation - standard - kit
Digital standard servo. Works as a variable speed motor. Speed when the power is 7.2 V is 0.14 sec/60°. Torque: 15 kg*cm Size: 40 x 20 x 40.5 mm Weight: 64 gr. The set includes...
Index: OST-14261
Index: OST-14261
30KG Serial Bus Servo - servo with 360 degree magnetic encoder - Waveshare 22414
The 30KG Serial Bus Servo is a programmable servo with a magnetic encoder with a full 360 degree rotation range. You can take any angle as the center of the position...
Index: WSR-21963
Index: WSR-21963
ST3025 40kg Serial Bus Servo - UART servo - Waveshare 24702
The ST3025 servo with a programmable magnetic encoder is a versatile module with unique capabilities. It provides precise 360° motion control, a wide voltage range from 6 V...
Index: WSR-23728
Index: WSR-23728
Servo - micro - 360 degrees - crocodile - Kitronik 25111
Micro type servo equipped with crocodile connectors. With crocodile connectors, you can use the servo in projects that include other connection components. The 360° rotary servo...
Index: KTR-20343
Index: KTR-20343
Servo TowerPro MG-996R Robot 360 - continuous work - 360 degrees
Strong standard servo. Works like a DC motor. The power voltage from 4.8 V to 6.6 V. Speed: 0.15 sec./60°. Torque: 11 kg*cm . Dimensions: 40.7 x 19.7 x...
Index: MOT-04798
Index: MOT-04798
Servo Feetech FS5106R - standard continuous 360 degrees
Standard servo. The power voltage from 4.8 V to 6 V. Operates as a variable speed motor. Speed: 0.16 s/60°. Torque: 6 kgf*cm Dimensions: 40.8 x to 20.1 x 38.0 mm...
Index: FTC-09172
Index: FTC-09172
Servo PowerHD AR-3606HB - continuous work 360 degrees
Strong servo, standard type. Works as a motor with adjustable speed. Powered with voltage: 4,8 - 6,0 V. Speed: 0.14 sec/60. Torque: 6.7 kg*cm ....
Index: MOT-01880
Index: MOT-01880
Servo Feetech FT90R-C002 - micro - continuous work - 360°
Micro type servo is perfect for constructions that need a lightweight yet efficient mechanism. An additional advantage of this servo mechanism is the 360° rotation angle ....
Index: FTC-16768
Index: FTC-16768
Servo EF90D 360 - micro - continuous work 360 degrees - with wheel and tire
EF90D Digital Servo Driver and Tyre. It has a 360° rotation angle and uses the pulse width to adjust the speed. The operating voltage is between 3 V and 5.5 V . The...
Index: EFS-17520
Index: EFS-17520
Servo Feetech FS90R - micro - continuous work 360 degrees
Feetech FS90R v2 micro servo. Operates as a variable speed motor. Powered from 4.8 V. Speed: 0.07 s/60°. Torque: 1.5 kg*cm. Dimensions: 30.5 x 12 x 22 mm....
Index: FTC-04689
Index: FTC-04689
ST3020 25kg Serial Bus Servo - UART servo - Waveshare 24703
The ST3020 Serial Bus Servo is a high-power servo, offering a torque of 25 kg*cm . It provides a full range of rotation up to 360° ,...
Index: WSR-23726
Index: WSR-23726
SC09 2,3kg Serial Bus Servo - UART Controlled Servo - Waveshare 24440
SC09 2.3 kg Serial Bus Servo is a servo from Waveshare with a torque of up to 2.3 kg*cm , with a supply voltage of 6 V. The servo can operate in two modes: a servo with a...
Index: WSR-23561
Index: WSR-23561
The continuous-duty servos are a modified design of the standard servos that use open-loop feedback to control the rotation speed of the servo, rather than closed-loop control to control the servo position.
360 ° servos are modern solutions in the form of electric motors that are integrated with the control system. Everything is contained within one housing. 360 ° servos can be used in robots and controlled by RC apparatus or by a microcontroller by direct connection to its input and output ports. Our offer includes a wide selection of 360 ° servos of various sizes and operating parameters. Be sure to check out all of the products below!
360° servo as a great alternative to conventional electric motors
There are many types of servos, and the choice of a specific type should be dictated primarily by the parameters that we care about. However, if we are looking for a given servo and we know what parameters will be important for our individual project, then a 360 ° servo may be one of the interesting alternatives.
Well, in robots or running platforms, servos are usually used to drive the wheels. Interestingly, in many cases, 360 ° servos offer better performance with a smaller size compared to standard electric motors and have a built-in speed control and rotation direction switching system, which allows the servo to work in an open-loop feedback system, in which the voltage signal from the pins the servo potentiometer is not being fed back to the control system. This means that servo mechanisms of this type may be characterized by a higher level of work efficiency.
360° servos – better parameters and holistic control
The direction of rotation is controlled in a proportional manner, thanks to the fact that the 360 ° servo supports virtually all directions of movement. Thanks to this, we gain much greater accuracy of the work of this component, which may in turn be crucial for the operation of the entire electronic project.
What is more, most servos use PWM as a control signal, generated by a microcontroller or a dedicated driver. The standard frequency of the control signal is 50 Hz, and the desired angular position of the t-bar on the servo shaft is obtained by controlling the filling of the PWM signal. A pulse of 1.5 ms duration will place the servo in neutral.
However, it must be known that such a control pulse with a duration of 1.0 ms will cause a minimal shift in the angular position of the servo. In turn, the maximum shift of this element will take place already when executing an impulse with a duration of 2.0 ms.
The 360 ° servo is a very good solution for most types of advanced electromechanical, automatic and robotic projects. Be sure to check the parameters of the selected device before purchasing to make sure that it will fit the requirements of the project.
360° servos and standard servos – major differences
360 ° servos do not use an angular position sensor like their classic counterparts. As a result, the control system will make such a servo work like a normal electric motor. The 360 ° servo rotor will turn fully in one direction. This is a big difference to standard servos.
For example, by sending a signal to the servo that will cause the drag bar to rotate 30 ° clockwise, the drag bar will rotate clockwise until a signal is sent to turn the drag bar to zero, which will stop the servo. When you specify a 30 ° rotation angle counterclockwise, the servo rotates at the same speed as when you specify a 30 ° rotation angle clockwise but counterclockwise.
However, it should be remembered that further increasing or decreasing the duty cycle of the signal corresponding to the rotation angle by a non-zero value will result in increasing or decreasing the servo rotational speed, respectively. If you need help choosing a servo, just contact us!