SENSORS - Strona 42
Fermion v2.0 - Pulse Oximeter and Heart Rate Monitor - MAX30102 - I2C - DFRobot SEN0344
Sensor module with integrated MAX30102 chip from DFRobot. This is an integrated pulse oximetry biosensor module that allows you to measure heart rate and monitor saturation,...DFRobot Gravity - 2x16 I2C LCD display - black with RGB backlight
LCD display 2x16 characters with black backlight, it can display the font in any colour from the RGB palette. Communicates with two-wire I2C bus. The kit includes a cable...Compact Optical Dust Sensor GP2Y1010AU0F
Sensor of dust that allows you to monitor the purity of the air. It is equipped with a sensor with a sensitivity of 0.5 V 0.1 mg/m3, for example, cigarette smoke. The system is...Moisture and temperature gauge Benetech GM1362 Hygrometer
A device for measuring the temperature and humidity. It performs the humidity measurement in the range from 0% to 100% RH and temperature measurement from -30 °C to 70 °C. It...3-axis magnetometer - MMC5603 - STEMMA QT / Qwiic - Adafruit 5579
The Magnetometer from Adafruit is equipped with the MMC5603 system - monolithic, integrated 3-axis AMR magnetic sensor. It is characterized by high sensitivity and has a...DFRobot Gravity - digital barometer, pressure and altitude sensor 1250hPa I2C/SPI 3,3-5,5V
Module with digital barometer from Bosch BMP388. The measurement range is from 300 hPa to 1250 hPa relative accuracy of 8 Pa on approx. 0.5 m of altitude. The system is...ADXL335 3-axis analog accelerometer - SparkFun SEN-09269
Sensor for measuring acceleration in three axes in the range of ± 3 g. Powered with the voltage from 1.8 V to 3.6 V; it consumes only 320 uA of the current. The output signal...- Discontinued product
Temperature, humidity, pressure and gas sensor - BME688 - SPI/I2C - STEMMA QT/Qwiic - Adafruit 5046
Multifunctional sensor that combines sensors for temperature, humidity, pressure and VOC gas. It has an embedded Bosch BME688 chip. Manufactured by Adafruit, it uses SPI and...CJMCU SHT10 - digital temperature and humidity sensor
Humidity and temperature sensor powered with the voltage of 3.3 V. Temperature measurement range is from -40 °C to + 123,8 °C, for the humidity is from 0 to 100 % RH.- Discontinued product
DFRobot Gravity - 12-position rotary switch V1
The module is equipped with 12-state rotary switch. It is powered with the voltage from 3.3 V to 12 V. The switch uses analog input for reading the output status, which allows...Gravity - AHT20 temperature and humidity sensor - DFRobot SEN0528
The Gravity series module is equipped with the AHT20 system enabling precise measurement of air temperature and humidity. It has a modern, semiconductor, capacitive humidity...QRE1113 - analog reflectance sensor - SparkFun ROB-09453
Analog sensor that has capability of detecting the line. Detects light reflected from the surface and on its basis determines the color of the surface. The module has an analog...Optical encoder set for Pololu micro motors - version 3,3V - 2 pcs - Pololu 2591
A pair of optical quadrature sensors, designed for installation in micro motors from Pololu. It consists of a board with the sensor and the plastic impeller kit, it allows you...Tuya M1 - PIR motion sensor ZigBee
A motion sensor (PIR) capable of detecting movement of moving people and larger animals within a range of 7 meters and an angle of 120° . Connects to the ZigBee network...INA228 - current and power sensor - I2C - STEMMA QT / Qwiic - Adafruit 5832
A compact proposition from Adafruit equipped with the INA228 system, which allows you to monitor the power in the circuit. It allows you to measure voltage with a maximum...Limit switch with folding roller - WK7124
Limit switch with a 7 cm long spring loaded lever ended with a folding roller. It operates at 250 V and the maximum load is 5 A. The limit switch is used to detect the position...- Discontinued product
Fermion - 3-Axis Accelerometer - I2C LIS2DW12 - DFRobot SEN0405
Fermion series module with powerful 3-axis accelerometer LIS2DW12 , manufactured by DFRobot. It features low power consumption (50 nA) , as well as low noise. The module...DFRobot Gravity DFR0018 - set of 9 modules with cables for Arduino
A set of 9 popular modules compatible with Arduino boards. It has 7 sensors, including: light, temperature, touch, rotation, vibration sensors, and the button and the module...Gravity - ozone sensor I2C - electrochemical - DFRobot SEN0321
Electrochemical ozone sensor for accurate O3 concentration measurement in the environment. Its measuring range is from 0 ppm to 10 ppm. It communicates via the I2C...DFRobot Gravity - digital pressure sensor 1kg (10N)
Pressure sensor for Arduino works in the range of up to 1 kg. It is based on HX711, it has 24-bit analog-to-digital converter designed to scale weight and control applications...Grove - mini limit sensor with roller
Module from the Grove series equipped with a limit switch with lever ended with roller. Working voltage is 3.3 V and 5 V. T he kit includes a cable adapted to Seeedstudio Base...Light control sensor MCE83 - 4000W - on DIN rail
The sensor is used to turn on and off lights depending on the brightness level of the environment. Its operation i not influence neither by the temperature nor by the humidity....- Discontinued product
VL53L4CD Time-of-Flight - Distance sensor - 1-1300mm - I2C - STEMMA QT/Qwiic - Adafruit 5396
Efficient, digital distance sensor made in the Time of Flight technology. Equipped with the VL53L4CD system, it measures distances in the range from 1 mm to 1300 mm with...
