- New
- New
- Reduced price
- Pack
- Sale
- New
M5Stamp Pico Mate - development module with ESP32-PICO-D4 - M5Stack
Index: MSS-20157
- Reduced price
- Sale
Grove - 3 Axis Digital Accelerometer 16g Ultra - Low Power (BMA400)
Index: SEE-14739
- Reduced price
- Sale
SENSORS - Strona 14
Loading...
DFRobot Gravity – Lightning Sensor
The module is equipped with the AMS AS3935 Franklin system and a special antenna Coilcraft MA5532-AE for determining the distance from atmospheric discharges, intensity and...
Index: DFR-13752
Index: DFR-13752
Grove - vibration motor + module
The module contains a miniature DC vibrating motor. It is very easy to use and is equipped with Grove interface which makes it easy to connect it with Arduino and Raspberry Pi.
Index: SEE-11361
Index: SEE-11361
BMP280 - digital barometer, pressure sensor 110kPa I2C/SPI 3-5V - STEMMA QT - Adafruit 2651
Module with digital barometer from Bosch BMP280. The measurement range is from 300 hPa to 1100 hPa with 1 hPa accuracy. The system is powered with the voltage ranging from 3 V...
Index: ADA-04631
Index: ADA-04631
Anemometer / anemometer Benetech GM816 - 6-arm rotor
Anemometer / wind gauge is used to measure the movement of gases, the flow rate of air. The device has a 6-arm rotor, which, due to gas flow, begins to rotate. Measurements are...
Index: BNT-10764
Index: BNT-10764
DFRobot Gravity - analog soil humidity sensor
The device is used to measure the soil moisture by measuring the resistance, compatible with Arduino and Raspberry Pi. The supply voltage is from 3.3 V to 5 V. The sensor is...
Index: DFR-11259
Index: DFR-11259
The Grove module is used to atomize water. It works with a voltage of 5 V. It can be used, among other things, as a humidifier but also allows for more advanced projects where...
Index: SEE-11362
Index: SEE-11362
Adapter IDC 10pin 1.27mm - Molex PicoBlade 1.25mm + connectors for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on Molex PicoBlade connector with a pitch of 1.25 mm and has four soldered goldpin pins of 2.54 mm....
Index: DNG-13747
Index: DNG-13747
Digital atmospheric pressure sensor - barometer - BMP280 - I2C - DFRobot SEN0372
Digital atmospheric pressure sensor manufactured by DFRobot. It has an integrated BMP280 chip from Bosch. The module integrates temperature and atmospheric pressure -...
Index: DFR-19198
Index: DFR-19198
Temperature and humidity sensor - Sensirion SHT40 - STEMMA AT/Qwiic - Adafruit 4885
Temperature and humidity sensor from Adafruit. Equipped with Sensirion SHT40 chip and STEMMA QT / Qwiic connectors, which facilitate the connection of the sensor with...
Index: ADA-19254
Index: ADA-19254
Grove - water level sensor - 10cm - Seeedstudio 101020635
Sensor to measure the water level in a vessel up to 10 cm using the Arduino module. The measurement is made by volume . The tile is equipped with a Grove connector, for...
Index: SEE-16346
Index: SEE-16346
Digital distance sensor 150cm - Waveshare 9524
Digital distance sensor for detecting the obstacles in range of up to 150 cm. The connection is via the digital output, it is working with the voltage from 2.5 V to 5 V.
Index: WSR-04454
Index: WSR-04454
Disposable ECG Electrodes Pack (12 pcs)
Disposable EKG electrodes designed for heart examination and other biomedical measurements. The set consists of 12 self-adhesive sensors of breathable fabric and foam with...
Index: DFR-07922
Index: DFR-07922
DFRobot Gravity - mini PIR motion detector
Digital PIR motion sensor for Arduino and Raspberry Pi. The module allows you to detect motion in the range of its operation, up to 7 meters. The sensor is powered with the...
Index: DFR-11275
Index: DFR-11275
BleBox windSensor Pro - WiFi wind sensor
The BleBox windSensor Pro sensor allows you to measure the instantaneous, maximum and average wind speed from 0.5 m/s to 30 m/s (from 1.8 km/h to 108 km/h). Measurement data...
Index: BOX-22834
Index: BOX-22834
Gravity - Analog temperature and humidity sensor - SHT30 - DFRobot DFR0588
Analog temperature and humidity sensor produced by DFRobot. The module is equipped with a high quality new generation SHT30 chip from Sensirion. It uses CMOSens...
Index: DFR-19383
Index: DFR-19383
Module with sensor BME680 from Bosch, it includes measurement of temperature, humidity, pressure and gases. It is able to measure humidity from 10% to 90% RH , pressure from...
Index: ADA-10872
Index: ADA-10872
BleBox humiditySensor v2 - WiFi temperature and humidity sensor
BleBox humiditySensor v2 is a small sensor that communicates via a local WiFi network, allowing you to measure relative humidity and air temperature . Thanks to the wBox...
Index: BOX-22885
Index: BOX-22885
VL6180X time-of-flight - distane and ambient light sensor I2C - Pololu 2489
A digital sensor combining time-of-flight proximity measurement and the ability to measure ambient light intensity. It operates up to 10 cm with a resolution of 1 mm. It...
Index: PLL-04856
Index: PLL-04856
Panel thermometer with LCD display from -50 to 110 degrees Celsius and measuring probe - 10m
Electronic thermometer powered by two lozenge type batteries (LR44). The device has a 10 meter long cable ended with a probe for temperature measurement. Temperature...
Index: BNT-19570
Index: BNT-19570
HB100 - Microwave Motion Sensor
Microwave sensor that detects the motion. It is used to detect objects in the premises in alarm systems and lighting systems. The sensor is powered with the voltage from 4.75...
Index: MOD-07561
Index: MOD-07561
IR pilot with two keys. It allows you to create a wireless connection with any microcontroller with an IR receiver.
Index: DFR-05962
Index: DFR-05962
Laser dust/air sensor PM2.5 / PM10 SDS018 - 5V UART/PWM
A laser dust sensor for monitoring air quality. It detects particles larger than 0.3 μm in diameter and measures PM2.5 and PM10. It features a fan for air suction. The system...
Index: SEN-08332
Index: SEN-08332
- Reduced price
- SPECIAL OFFERS
Fermion - SHTC3 I2C temperature and humidity sensor - DFRobot SEN0414
The SHTC3 temperature and humidity sensor on the Fermion series DFRobot board. The SHTC3 can measure humidity from 0% to 100% RH with an accuracy of ±2% RH and temperature...
Index: DFR-20677
Index: DFR-20677
Velleman WPSE306N ultrasonic distance sensor 3-550cm
Ultrasonic sensor operating in the range from 3 cm to 550 cm. It is powered with the voltage from 4,5 V to 5 VDC. The output is a signal whose duration is proportional to the...
Index: VEL-13022
Index: VEL-13022