- Reduced price
- Sale
LED diodes - Strona 6
Loading...
A module that allows you to control the brightness of monochrome panel with LED backlight and brightness and color panel LED RGB. It has a 4-pin connector compatible with the...
Index: LED-07463
Index: LED-07463
Index: LED-04539
Module Pixel x2 with addressed diodes LED RGB WS2812B 5050 - 28mm
The strip consists of 2 individually addressed RGB LEDs 5050 with integrated control unit. Module requires one microcontroller output. The modules's length is 28 mm.
Index: MSX-08787
Index: MSX-08787
Portable LED tester is equipped a connector that allows you to test any LED current range from 1 to 150 mA. The device is powered by battery 9V.
Index: MOD-04745
Index: MOD-04745
Grove - RGB LED v2.0 - module with RGB diode
Module with RGB diode from Grove. It a llows you to control RGB diode using the digital pins of the microcontroller, and simultaneous connection of even 1024 modules using...
Index: SEE-11299
Index: SEE-11299
The SP107E Bluetooth LED Music Controller for light and music effects, has the ability to adjust the brightness. It has 18 pre-programmed types of music effects addressed to...
Index: DNG-14870
Index: DNG-14870
Strip LED SMD2835 IP65 4,8W, 60 LED/m, 8mm, cold white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 4.8W/m, density of 60 diodes per meter. The color of the light is cold white. Protection factor...
Index: LED-07092
Index: LED-07092
DFRobot Gravity - colorful RGB LED module
LED module lights up in the seven colors of the rainbow. The controller randomly chooses the color. Modules may be connected in a cascade, one interface can control all the...
Index: DFR-09382
Index: DFR-09382
Grove - LED Strip Driver v2.0 - LED driver for Arduino - Seeedstudio 105020002
A module that allows you to control the brightness of monochrome LED strip with LED RGB brightness and color. It has 2-pin connectors, power supply screw connector, 4-pin screw...
Index: SEE-04443
Index: SEE-04443
Module with red backlight, is equipped with a Gravity connector ideal for working with Arduino. The LEd glows, when the pin signal switches to a low state.
Index: DFR-11271
Index: DFR-11271
Laser diode 2W red 650nm 5V - Velleman WPM434
Module with a red laser diode with a power of 2 W and a beam length of 650 nm. It is powered by 5 V. It consumes up to 400 mA of current.
Index: VEL-15386
Index: VEL-15386
DFRobot RGB LED driver - Shield for Arduino
Shield for Arduino allows you to control multi-color RGB LED strip. Circuit board has 3 PWM output for each color component of RGB, it is also equipped with an IR receiver,...
Index: DFR-04276
Index: DFR-04276
Driver for addressed RGB LED strips Bluetooth SP105E Magic Controller
The SP105E Magic Controller is designed to operate and control LED strip addressed lighting. Communication takes place via Bluetooth from the applications available in Google...
Index: DNG-14869
Index: DNG-14869
Prototype board for LED diodes SMD5050 - 10pcs. - Adafruit 1762
Prototype board to facilitate the use of SMD 5050. Outputs are openings for goldpin connector, raster 2.54 mm suitable for breadboards. Price for 10 pieces.
Index: ADA-05293
Index: ADA-05293
Index: LED-08297
NeoPixel - LED diode WS2812B / SK6812 8mm - 5szt. - Adafruit 1734
Set consisting of 5 NeoPixel WS2812B / SK6812 diodes with a lens diameter of 8 mm . Each LED has an individual address, thanks to which it is possible to connect several...
Index: ADA-21059
Index: ADA-21059
Index: LED-08186
LED strip SMD2835 COB 12V IP20 10W, 480diodes/m, neutral white color - 5m
SMD2835 LED strip with 480 diodes placed on one meter of the strip and spaced every 25 mm . The length of the strip is 5 m . The LEDs emit white light of neutral colour...
Index: LED-18597
Index: LED-18597
Neo Hex - hexagonal 37x RGB LED board - WS2812 - M5Stack A045-B
Neo Hex is a hexagonal plate with 37 WS2812 RGB LEDs. It was produced by the M5Stack company and is compatible with a series of modules from this manufacturer - M5Stack...
Index: MSS-21477
Index: MSS-21477
Electro-Fashion Sewable LEDs, white, pack of 10 - Kitronik 2714
Set containing 10 pieces of white LED modules . The modules can be easily implemented into intelligent clothing projects thanks to the increased diameter holes.
Index: KTR-16136
Index: KTR-16136
Module with green LED, it is equipped with a Gravity connector, it is ideal for working with Arduino. The LED glows, when the pin signal switches to a low state.
Index: DFR-11270
Index: DFR-11270
Module with blue backlight, equipped with a connector Gravity is ideal for working with Arduino. The LED glows, when the pin signal switches to a low state.
Index: DFR-11269
Index: DFR-11269
Grove - Variable Color LED v1.1
Module with RGB LED and Grove connector. The color of the LED can be changed by digital signal and PWM, as well as by potentiometers on the board. The module is powered from...
Index: SEE-15454
Index: SEE-15454
Timed Night Light Project Kit - Kitronik 2139
A set developed by specialists from Kitronik, designed to build a bedside lamp with a twilight sensor . The kit also includes a potentiometer with which you can adjust the...
Index: KTR-21416
Index: KTR-21416