- New
- On sale!
- Promotion
Pen Lifter - pen holder - for :Move Motor platform - Kitronik 56118
Index: KTR-22590
- Reduced price
- Promotion
- On sale!
- Promotion
LED diodes - Strona 5
Loading...
Power LED Star 1 W - green with heat sink
Power LED green with power of 1 watt and with a heat sink.
Index: LED-02495
Index: LED-02495
Index: LED-11519
Strip LED SMD2835 IP65 4,8W, 60 LED/m, 8mm, natural white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 4.8 W/m, density of 60 diodes per meter. The color of the light is natural white. Protection...
Index: LED-07093
Index: LED-07093
Module with LED RGB SMD diode - Iduino ST1090
Iduino module with diode SMD LEDS light emitting RGB colors. It has a 4-pin connector with adjustable input PWM. It can be controlled via the Arduino.
Index: OST-14284
Index: OST-14284
Power LED Star 3 W - green with heat sink
Diode type Power LED green 3W with a heatsink.
Index: LED-02501
Index: LED-02501
Module with blue LED, fitted with Grove connectors is ideal for working with Arduino. The LED turns on, when the signal pin goes into high state. In addition, on the board...
Index: SEE-11296
Index: SEE-11296
APA102 SMD5050 - set of RGB LEDs with built-in controller - 10pcs
A set of ten individually addressed RGB LEDs SMD 5050 with built-in controller using two-wire communication Protocol SPI.
Index: ODS-05297
Index: ODS-05297
NeoPixel Ring - LED RGB ring 12xWS2812 - Adafruit 1643
The ring consists of 12 individually addressed RGB LEDs 5050 with integrated control unit. Module needs one microcontroller output. Outer circle diameter is 37 mm.
Index: ADA-02944
Index: ADA-02944
Index: LED-04539
A module that allows you to control the brightness of monochrome panel with LED backlight and brightness and color panel LED RGB. It has a 4-pin connector compatible with the...
Index: LED-07463
Index: LED-07463
Module Pixel x2 with addressed diodes LED RGB WS2812B 5050 - 28mm
The strip consists of 2 individually addressed RGB LEDs 5050 with integrated control unit. Module requires one microcontroller output. The modules's length is 28 mm.
Index: MSX-08787
Index: MSX-08787
Portable LED tester is equipped a connector that allows you to test any LED current range from 1 to 150 mA. The device is powered by battery 9V.
Index: MOD-04745
Index: MOD-04745
LED RGB strip driver with IR remote - 24 keys
A module that allows you to control the brightness of monochrome panel with LED backlight and brightness and LED RGB color panel. It has lots of preset functions. Equipped...
Index: LED-06490
Index: LED-06490
Grove - RGB LED v2.0 - module with RGB diode
Module with RGB diode from Grove. It a llows you to control RGB diode using the digital pins of the microcontroller, and simultaneous connection of even 1024 modules using...
Index: SEE-11299
Index: SEE-11299
The SP107E Bluetooth LED Music Controller for light and music effects, has the ability to adjust the brightness. It has 18 pre-programmed types of music effects addressed to...
Index: DNG-14870
Index: DNG-14870
LED diode 5 mm red dyfuzyjna. Price per pack of 1000 pieces.
Index: LED-08185
Index: LED-08185
DFRobot Gravity: Digital RGB LED Module
Gravity: Digital module LED RGB is a cascading interface, compatible with LED tape. Due to its construction it provides an easier way to connect the individual modules to...
Index: DFR-14425
Index: DFR-14425
DFRobot Gravity - module with Power LED
Module with a very bright LED diode. Voltage supply 5 V. When operating consumes approx. 20 mA. It w orks with Arduino modules.
Index: DFR-07442
Index: DFR-07442
Strip LED SMD2835 IP65 4,8W, 60 LED/m, 8mm, cold white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 4.8W/m, density of 60 diodes per meter. The color of the light is cold white. Protection factor...
Index: LED-07092
Index: LED-07092
- Reduced price
- Promotion
DFRobot Gravity - colorful RGB LED module
LED module lights up in the seven colors of the rainbow. The controller randomly chooses the color. Modules may be connected in a cascade, one interface can control all the...
Index: DFR-09382
Index: DFR-09382
LED RGB strip driver with IR remote - 20 keys
A module that allows you to control the brightness of monochrome panel with LED backlight and brightness and LED RGB color panel. It has lots of preset functions. Equipped with...
Index: LED-06484
Index: LED-06484
- Reduced price
- Promotion
Grove - LED Strip Driver v2.0 - LED driver for Arduino - Seeedstudio 105020002
A module that allows you to control the brightness of monochrome LED strip with LED RGB brightness and color. It has 2-pin connectors, power supply screw connector, 4-pin screw...
Index: SEE-04443
Index: SEE-04443
Module with red backlight, is equipped with a Gravity connector ideal for working with Arduino. The LEd glows, when the pin signal switches to a low state.
Index: DFR-11271
Index: DFR-11271
DFRobot RGB LED driver - Shield for Arduino
Shield for Arduino allows you to control multi-color RGB LED strip. Circuit board has 3 PWM output for each color component of RGB, it is also equipped with an IR receiver,...
Index: DFR-04276
Index: DFR-04276
