LED lighting - Strona 7
RGB LED strip SJ-10060-SK6812 - digital, addressed - IP65 60 LED/m, 18W/m, 5V - 1m
RGB LED strip powered with a voltage of 5 V with a removable silicone case. Consumes power: 18 W/m, the density is 60 diodes per meter. The temperature of white color light can...RGB LED strip SK6812 IC - digital, addressed - IP65 30 LED/m, 9.6W/m, 5V - 1m
RGB LED strip powered with a voltage of 5 V with a removable silicone case. Consumes power: 9.6 W/m, the density is 30 diodes per meter. The degree of protection is IP65....RGB LED strip SJ-10030-APA102 IC - digital, addressed - IP65 30LED/m, 7.2W/m, 5V - 1m
RGB LED strip powered with a voltage of 5 V with a removable silicone case. Consumes power: 7.2 W/m, the density is 30 diodes per meter. The temperature of white color light...Connector for LED RGB Strips 10mm 4 pin
Connector to connect two LED strips with a width of 10 mm. It has four pins. Works with RGB LED strips.- Discontinued product
Power supply S-36-12 - for LED strips - 12V / 3A / 36W
Stable, switched-mode industrial power supply for powering LED strips. Voltage: from 100 V to 240 V. Output voltage: 12 VDC. Output current: 3 A. Equipped with a terminal...Grove RGB LED Stick - LED RGB 10 x WS2813 Mini 3535
The panel consists of 10 individually addressed RGB LEDs WS2813 Mini-3535 with built-in control unit. LEDs located on the panel are controlled with just one signal pin.Power supply GLP GPV-35-24 for LED strip 24V/1,5A/36W - waterproof
GPV-35-24 power supply for LED lighting with 24 V output voltage and 36 W. The power supply housing is waterproof. Built-in electronic protections protect the secondary...Table top lamp with 8D magnifying glass and LED backlight
Lamp with magnifying glass for mounting on the desk top. Diameter of the magnifying glass is 127 mm, increase of 8 diopters.LED ring ZIP Halo HD for the BBC micro:bit - Kitronik 5672
Circular board for the micro:bit module equipped with 60 addressed RGB LEDs, RTC chip, 3 AA batteries basket, MEMS microphone, buzzer and additional I/O ports. The board...LED strip with motion and twilight sensor CDA1 - 120cm with power supply
120 cm long LED bar with dedicated motion and twilight sensor . The diodes have a white, warm color. The product is adapted for use in installations equipped with dimmers....NeoPixel Ring - LED RGB ring 12xWS2812 - Adafruit 1643
The ring consists of 12 individually addressed RGB LEDs 5050 with integrated control unit. Module needs one microcontroller output. Outer circle diameter is 37 mm.RGB LED Strip WS2812B - digital, addressed - IP65 30 LED/m, 9W/m, 5V - 5m
Individually addressable RGB LEDs located in a 5 m bar with a density of 30 diodes per meter. Each pixel may emit a color from 24-bit palette. To control module, one...Strip LED SMD5050 IP20 14,4W, 60 LED/m, 10mm, RGB - 5m
RGB LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 14.4 W/m, density of 60 diodes per meter. Protection factor IP20. Price for a package, which...LED RGB WS2811 - IP65 60LED/m, 14,4W/m, 12V - 5m - black
Individually addressed RGB LEDs located in a 5 m strip with a density of 60 diodes per meter. Each pixel consists of three RGB LEDs and can emit a color from 24-bit palette. To...Power supply Adler AD12-5001 for LED strip - 12V/5A/60W - waterproof IP67
Waterproof, stable power supply for powering LED strips. Supply voltage: 100 V to 264 V. Output voltage: 12 VDC. Output current: 5 A. Connection: loose wire with removed...- Discontinued product
LED strip RGBCW SK6812 - digital, addressed - IP65 60 LED/m, 18W / m, 5V - 5m
Individually addressed RGBCW LEDs placed on a 1 m panel with a density of 60 LEDs per meter. Pixels other than RGB may also emit shades of white, each pixel can emit color from...Power supply Akyga 8,5-14V / 2A / 25W
25 W power supply designed to supply lighting based on LED technology, e.g. tapes, bulbs, panels, RGB controllers and other DC-powered devices from 8.5 V to 14 V. The voltage...PiMoroni IS31FL3731 - Matrix LED RGB 5x5 I2C
A module with a matrix of 5 x 5 LED RGB, based on the system IS31FL3731. Communicates via an I2C bus, allowing for work with Raspberry Pi and Arduino. Powered by voltage of 3.3...LED Ring for BBC micro:bit - Kitronik 5625
An expansion board for the BBC micro:bit featuring an RGB LED ring built with 24 individually addressable WS2812B LEDs. Supply voltage is from 3,5 V to 5 V . The pinouts...Desk lamp on a stand with 5D magnifying glass and LED 60 SMD backlight NAR0463-2
LED-backlit lamp mounted to the table top with a magnifying glass with 5 dioptres magnification. A metal clamp ensures that the lamp is securely attached to the desk. The...LED lamp ML9000B under the cabinet with a touch switch and a remote control
Round lamp with five LEDs. It has a touch switch located in the middle of the light panel. A remote control is attached to the lamp, allowing you to remotely switch on the...RGBWW LED strip SK6812 - digital, addressed - IP30 60 LED / m, 5V - 5m
RGBWW LED strip allowing for individual control of each diode. It has been equipped with SK6812 chip. In addition to RGB colours, it can also emit a warm white colour....LED strip 5 x USB 5V LEDs with light sensor - Kitronik 3562
The LED strip has been designed for use in non-standard housings and low-power lighting. Thanks to the use of a light sensor in the strip, the device works great in the form...RGB LED strip WS2811 - digital, addressed - IP65 48 LED/m, 12W/m, 12V - 5m
Individually addressed RGB LEDs placed on a 5 m panel with a density of 48 LEDs per meter. Each pixel consisting of three RGB LEDs can emit a color from 24-bit palette. The...See also
- DJI Mavic drones
- Power supplies 12v 10a
- DJI Inspire drones
- Anet 3D printers
- Zortrax Filaments
- Esperanza compressed air
- DJI Phantom drones
- Outdoor LED lighting
- Syma drones
- Fluorescent filament
- Hexbug toys
- DJI Mavic drones - drones and accessories
- Compressed air to clean the keyboard
- Intel modules & kits
- Magnetic balls
- PLA Pro filaments
- Tablets
- Encoders
- Intel starter kits
- Android Box Smart TV
- Banana Pi
- 2D printers and pens
- Intel expansions & hats
- Smart ABS filaments
- Li-Fe batteries
- Resistors SMD 1206
- GPS trackers
- Dobot 3D printers
- Books about Raspberry Pi
- Chargers
- String bags (zip bags)
- VR 3D glasses (sets)
- Intel - module accessories
- Electrolytic capacitors SMD
- Refill filaments
- Tantalum capacitors SMD
- Sensors and alarms
- RC cars and models
- Doorbells and peepholes
- Zortrax 3D printers
- Flexible filaments
- Khadas VIM
- Arylic sound modules
- Control equipment
- Goofoo 3D printers
- Bluetooth Speakers
- Linear actuators
- Urbicum 3D printers
- Webcams
- Spare parts
- ATMAT 3D printers
- Mycusini 3D printers
- Raspberry Pi 2B+
- LED beacons
- Makeblock 3D printers
- Orange Pi
- Transport cases
- MakerPi 3D printers
- Silk Filaments
- Sparky
- Satin filaments
- Air conditioning and heating
- 3D printer Artillery
- Gas soldering irons
- LittleBits
- Exta Free - sensors and modules
- Netronix RFID modules
- Rock Pi
- Spresense Sony
- AST lighting drivers
- CubieBoard
- WowWee
- Coolseer home automation
- AMK - automation and control
- Smartwatches