Product description: PETG Devil Design filament 1.75 mm 1 kg - Light Gray
Light gray PETG filament manufactured by Devil Design . The main features of PETG are resistance to damage, high temperature resistance and low shrinkage. Thanks to good adhesion, which is maintained even at large angles of inclination of the print surface, the material allows you to create models with high aesthetic values . It is ideal for everyday printing due to its ease of printing and versatile use. One spool holds 1 kg of filament and its diameter is 1.75 mm .
PETG Filament Devil Design 1.75 mm 1 kg - Light Gray.
One spool contains 1 kg of filament with a diameter of 1.75 mm.
PETG filament properties
- Flexible
- Odorless
- Hydrophobic
- With high strength
- With low shrinkage
- About good adhesion
- Easy to print
- Scratch resistant
Suggested filament printing parameters
| head temperature | From 220°C to 250°C |
| table temperature | From 70°C to 80°C |
| Print cooling | Optional |
Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.
Technical specification and properties of the Devil Design PETG filament
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 1.75mm |
| Filament dimensional tolerance | +/- 0.05mm |
| Color | Light Gray |
| printing temperature | From 220°C to 250°C |
| table temperature | From 70°C to 80°C |
| Material | PETG |
| Desiccant | Yes |
| Vacuum packing | Yes |
| net weight | 1 kg |
Filaments are hygroscopic, meaning they absorb moisture. Therefore, breaking the airtight vacuum packaging permanently reduces the quality and value of the product. For this reason, if an unpacked item is returned, the refund amount will be proportionally reduced. This does not apply to returns resulting from manufacturing defects in the material, such as damaged or cut filament. Please carefully check the color and material type on the label before opening the foil packaging.
