Product description: Filament Devil Design PETG 1.75 mm 1 kg - Green Transparent
The PETG filterbyDevil Design intransparentgreen is vacuumpacked. It is additionally protected with a moisture absorber. The product is fully compatible with3D printersthat do not have a built-in blockade against cartridges from external suppliers or can be used in open source devices. The described PET-G filament is distinguished by its high quality, which makes it extremely efficient and easy to use. The thickness of the pillar is1.75 mm andthe netweightis 1 kg.
In our offer of filaments you will also find other materials and colors.
Properties ofPETGfilaments
- Highly durable
- Scratch-resistant
- Flexible
- Odourless
- They are characterized by very low material shrinkage
- Require moderate print cooling
Filament Devil Design PET-G 1.75 mm 1 kg - transparent green.
Suggested printing parameters of the filament
| Printing temperature | From 220°C to 250°C |
| Table temperature | From 70°C to 80°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Technical specifications and physical properties of the Devil Design pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,05 mm |
| Colour | Green transparent |
| Printing temperature | From 220°C to 250°C |
| Table temperature | From 70°C to 80°C |
| Material | PET-G |
| Reel diameter | 200 mm |
| Reel width | 70 mm |
| Mounting hole diameter | 52 mm |
| Package | Printed carton |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0,02 mm |
| Packaging dimensions | 205 x 205 x 80 mm |
| Net weight | 1 kg |
Useful links |
