- EOL
|
Attention! The product has been discontinued. Check other products incategory. |
Product description: Creality CR-10 v2 3D Printer
3D printer designed byCreality. Allows you to print objects with maximum dimensions:300 x 300 x 400 mm. It has a metal extruder andreinforced structurewith dimensions of 500 x 560 x 650 mm. The set consists of partially assembled elements, thanks to which its assembly takes only several minutes.
The printer isan upgraded version of the CR-10 model. The manufacturer has applied a number of modern solutions that increase the stability and precision of printing models.
Thanks to an improved cooling system, which usestwo fans, the heat is evenly dispersed and the filament is cooled almost immediately. This reduces extruder clogging and misfeeding of the printing material. These innovations result in55%better cooling, a consistentfilament transport temperatureof30°Cand up to10% higherprintingprecision(compared to the CR-10).
Presentation of Creality CR-10 v2.
Assembly of the CR10 v2 printer.
Key features of the Creality CR-10 v2 printer
-
Redesigned extruder -Anall-metal extruderprovides smooth and stable operation, has an end-of-filament sensor, and the durable design shows high wear resistance.
-
Reinforced metal frame -The high qualityV-shapedconstruction of the printer provides greaterprinting stabilityand noticeably reduces vibration during operation.
-
Improved ultra-quiet motherboard -An upgraded motherboard andquiet driversprovide greater performance and stability during operation,which can last for up to200 hourswithout interruption.Withfansthat lower the speed of their operation, the controller sounds less than50 dBduring operation.
-
Enhanced power supply -The use of a350Wpower supply allows the maximumtemperatureof the printtableto be increased to100°C, increasing its warm-up speed by 30%.
-
PrintResumeFunction - The print resume functionprevents loss of print progress if the machine loses power.
-
Simple printer assembly -The kit consists ofpartially assembled components, so assembly takes minutes. With just a few simple steps, you can start the device and start printing.
Comparison of Creality CR-10 printer versions
| Creality CR-10 version comparison | |||
|---|---|---|---|
| Model: | CR-10 | CR-10 v2 | CR-10 v3 |
| Number of hotend fans: | 1 | 2 | 2 |
| Extruder type: |
Bowden |
Bowden (can be change to direct drive) |
Direct drive |
| Motor driver type: | standard controller | silent motor controller | silent driver |
| Material of the extruder: | plastic |
metal |
metal |
| Print resume function: | no | yes |
yes |
| Power supply: | 12 V | 24 V | 24 V |
| Z axis: | single |
double |
double |
Attention!
The device must be assembled according to themanufacturer's instructionsbefore connection
| Technical specification | |
|---|---|
| Supply voltage |
110 V to 220 V (AC - mains) |
| Total power: | 350 W |
| Display: | LCD |
| Printing speed | 180 mm/s max. |
| Nozzle diameter: |
standard: 0.4 mm |
| Supported filament: |
PLA, ABS, TPU, PETG |
| Filament diameter: | 1.75 mm |
| Printing Accuracy | ± 0.1 mm |
| Printing thickness | 0.1 mm to 0.4 mm |
| Operating mode: | Online or from SD card |
| File format: | .stl, .obj, G-Code files |
| Software: | Cura, Repetier-Host, Simplify3D |
| Print size: |
300 x 300 x 400 mm |
| Nozzle temperature: | 250°C max. |
| Work table temperature: | 100°C max. |
| Machine dimensions: |
500 x 560 x 650 mm |
| Weight: | 11.5 kg |
Useful links |
