- EOL
Attention! The product has been discontinued. Check other products in category. |
Description: Smoke and temperature sensor Jablotron JA-111ST-A
Sensor forsmoke detection andtemperaturemeasurement. Warns against fire in the interior of residential or commercial buildings. The alarm is indicated by aloud sirenfrom the detector and other sensors in the system. It is powered by 12 V,incase of power loss, it is supported by 3AAbatteries(not included).
Smoke and temperature detector Jablotron JA-111ST-A.
When the detector is powered from the control panel bus, it acts as asystem device (EN54-7; EN 54-5). When powered by3x 1.5 V AAbatteries,it works as astand-alone unit(EN14604)in case of loss of 12 V supply voltage or communication with the control panel.
Contents of the JA-111ST-A Jablotron kit.
The device is equipped withtwo sensors- anoptical smoke detectorand atemperature sensor. The optical smoke detector uses scattered light. It is very sensitive to particles in dense smoke, but it is not very sensitive to particles produced by burning liquids, e.g. alcohol, so it is additionally equipped with a temperature sensor which reacts better to fire.
Acoustic signaling of the detector
- Fire alarm detected by the detector.
- Fire alarm from the system (alarm triggered by another detector).
- Another type of alarm (e.g. intrusion alarm).
- You can set the zones for which the alarm will be signaled by the system.
Smoke and temperature sensor specifications
- Sowing:
- 9 V to 15 V / 3.5 mA (150 mA during alarm)
- 3x alkaline battery AA 1.5 V / 2.4 Ah
- 3x Lithium battery AA 1.5 V / 3 Ah
- Detection method: optical, scattered light
- Smoke sensitivity: m = 0,11 to 0,13 dB/m, according to EN 14604:2005, EN 54-7
- Temperature sensitivity: class A1 according to ED 54-5
- Alarm call temperature: 60°C to 65°C
- Communication frequency: 868.1 MHz, Jablotron protocol
- Radio range: up to 300 m (in the open air)
- Operating temperature: -10°C to 65°C
- Compliant with: EN 54-25, ETSI EN 300 220, EN 60950-1, EN 50130-4 and EN 55022.
- Can be used in accordance with: ERC REC70-03
- Dimensions: diameter 126 mm x height 50 mm
- Weight: 150 g
The set includes
- Jablotron detector JA-111ST-A
- Mounting pins with screws
Useful links |