- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D printer - Original Prussian SL1 - assembled.
Original 3D printer by a renowned manufacturer,Prusa. The device works in MSLA technology, usinga high resolution LCD panel and UV LEDto cure the resin. Printed models thus obtain an unprecedented level of detail. The Prusa SL1 enables the creation ofprints withmaximumdimensions of 120 x 68 x 150 mm.The set consistsof a fully assembled printer.
Original Prusa SL1 is also available in aset with a print hardening washer. |
Presentation of the Prusa SL1 model.
Unusual level of detail of the printouts
TheLCD screenused in the SL1 for resin curing has a diagonal of5.5 inches and a resolution of 2560 x 1440 pixels. In this configuration, the size of a single pixel is only0.047 mm, which is at the same time a constant value ofX and Y axis resolution.
High level of detail reproduction of Prussian SL1 prints.
Prusa SL1 usesTrinamicdrivers, which not only increase the precision of printouts, but are also extremely quiet during operation.
The minimum layer height that can be achieved by Prusa SL1 is 0.01 mm. However, the manufacturer recommends that the working values of this parameter should be in the range of 0.025 - 0.1 mm. |
Process of creating 3D model in MSLA technology.
Movable resin tank
Innovative design of the resin tank allows it tochange its position angle.Thanks to this, after the next layer is applied, the printout is not lifted vertically above the bottom of the reservoir. This enables moreefficient mixing of the resinand makes it easier to create larger surface layers. This improves the quality of prints and increases the speed of operation.
Mobile resin tank in Prusa SL1.
Large working area and printing speed Prusa SL1
Thanks to the use of anefficient UV lamp,the fixation ofa single layer of resin takes only6 seconds. The maximumworking areais 120 x68 x 150 mm.Thus, the Prusa SL1 allows to create large prints in the shortest possible time.
The Prusa SL1 workspace.
Flexible FEP film to protect the resin tank
The bottom ofthe resintankin SL1 is covered witha flexible FEP foil. This is a durable transparent material that ensures that the container is leakproof. The manufacturer provides for asimple replacement ofthe film in case of damage. This action is limited to unscrewing a few screws.
FEP foil on the bottom of the container with resin.
Automatic calibration of Prussia SL1
The use ofa ball joint, which is an element connecting the printing platform with the arm enabling its vertical movement, significantlysimplifies the process of PrussiaSL1calibration. It is limited to loosening the fixing screw and starting the automated procedure from the menu level.
Automatic calibration function in Prusa SL1.
Aluminium construction for stability
Prusa SL1 has a reinforcedaluminum constructionwith a separate body, which provides the printer with stability during operation.
Aluminium elements of the SL1 Prusa SL1 construction.
Resin level sensor
The resin level sensor is placedinside the tank, which allows for a more accurate selection of theright amount of material for printing.The sensor also informs you when the resin is running out, which prevents unexpected interruption of printing.
Resin sensor in Prusa SL1 is located inside the container for printing material.
Advanced fume extraction system
The SL1 Prusa SL1 has an advanced system for cooling and extraction of fumes generated during operation.The printer coverprotects against the escape of unwanted substances outside. Proper cooling and air flow is ensured byan efficient fan equipped with a high quality filter.
Efficient fan with filter used in SL1.
Convenient touch menu and a number of configuration options.
Menu Prusa SL1 is operated by means of atouch LCD displaylocated in the front of the casing. The printer has the ability to connect to a computer viaLANorWi-Fi. It is also equipped with aUSBport.
Menu Prussia SL1.
The printer software allows you to follow the progress of printing with a smartphone. The printer firmware can be updated via OTA. The manufacturer also provides its own PrusaSlicer print preparation software.
New version of the proprietary PrusaSlicer program.
Specification Prusa SL1
Technical Specification | |
---|---|
Printing method: |
LCD and UV LED |
LCD display: | 5,5" |
Display resolution: | 2560 x 1440 pixels |
Print speed: | 6 seconds per layer |
Minimum layer height: | 0.01 mm |
Recommended layer height: | 0,025 - 0,1 mm |
XY resolution: |
47 um |
LED power supply: |
25 W |
The operating system: | Windows |
The language: | English |
Connection: | USB, Wi-Fi, LAN |
Printing material: | UV resin 405 nm |
The casing: | Aluminium and plastic |
A light source: | UV LED 405 nm |
Print size: |
120 x 68 x 150 mm |
Printer dimensions: | 400 x 237 x 225 mm |
Contents of the set Prussia SL1
- SL1 Prussian printer
- Flash drive
- Resin funnel
- Spatula for easy tearing off the printout
- Allen wrenches
- Resin 500 ml
- Protective glove
Contents of the Prusa SL1 set.
The printer kit includes 500 ml of resin. |
Useful links |