- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Module Arduino Fio is compatible with softwareFunnelwhich includes several libraries that facilitate the use of the popular modules.The board has a connector for XBee module and a socket for connectingthe rechargeable lithium-polymer battery. Thanks to the integrated charger's system, package li-pol can be charged viamini USB cable.
The board containsan ATmega328 microcontroller, is equipped with 14 digital I/os, 6 of which can be used as PWM outputs (e.g. for motor control), and 6 analog inputs. The system works with the clock signal with the frequency of 8 MHz and has 32 KB of Flash memory and 2 KB of SRAM
Specification
- Supply voltage: from a 3.35 V to 12 V
- Microcontroller:ATmega328P
- Maximum clock frequency: 8 MHz
- SRAM: 2 KB
- Flash memory: 32 KB (5 KB is reserved for bootloader)
- EEPROM: 1 KB
- The number of digital inputs/outputs: 14
- The number ofPWM channels: 6
- Number of analog inputs: 6
- Communication interfaces:UART, SPI,I2C
- External interrupts
- Socket for XBee module
- Connector for rechargeable batteryli-pol
- Built-in chargerli-pol
- Power switch, RESET button
- Connected LED
- Dimensions: 28 x 66 mm
|
Attention!
|
Power
The module is powered through connector of the rechargeable lithium-polymer battery, with voltage in the range of 3.35 V to 12 V. The Arduino Fio has a built-in charger that's powered throughthe mini USB cable. The system can also be powered from an external source by connecting the voltage through the led out socket.
Programming
Creating and uploading the software is allowed by the free environment supplied by the manufacturer. The Arduino Fio does not have a system that controls a USB interface. Therefore, for programming, necessary is adapter UART<->USB. More details are onthe website of the manufacturer.
Useful links |
