- EOL
|
Attention! The product has been discontinued. Check other products incategory. |
Product description: Kit for building a remote-controlled car - TotemMaker TRK-TR1
Totem's constructionkit is equipped with elements enabling the construction of a car controlled remotely from a smartphone viaBluetooth.The kit containsmore than 600 elements,which allow you to create a vehicle according to your own concept. The set is designed forchildren over 11 years old. The kit includes tools needed to assemble the vehicle such as screwdriver, Allen key and wrench.
Electronic components included in the kit
- Base board X2 - Equipped with an STM32 microcontroller, it is responsible for controlling the motors and servers from the set.
- Base board X3 - Equipped with microcontroller MCP25625, is responsible for wireless communication with the smartphone.
- Function Board 53 - DC motor and 2 servo controllers. Enables control of direction of motion and motor speed, Works with motors up to 18 V and 1 A.
- Power board 1 - Enables connection to the Li-Ion battery module. It has a battery charging function.
- Function board 30 - Is responsible for powering the unit. It can provide 5 V and 2 A. It has built-in overcurrent and short circuit protection. The board can be powered up to 18 volts.
The kit enables the construction of a remote-controlled car.
Remote-controlled car control
The set has a module enabling wireless communication with the smartphone via Bluetooth. The manufacturer has prepared a dedicated application forAndroid andiOS,allowing youto control the created vehicle.
The control of the constructed vehicle is carried out by means of a phone.
Using TotemMaker construction sets
Thefull compatibility ofallsets from the Totem seriesallows you to expand your projects with additional elements. Using additional elements, it is possible to create more complex and complex structures.
The set contains the elements necessary to start the vehicle.
The kit includes:
- 171 x M3 6 mm screw
- 3 x M3 screw 8 mm
- 12 x M3 screw 12 mm
- 13 x M3 screw 16 mm
- 3 x M3 screw 35 mm
- 1 x servo SG-5010
- 4 x M4 screw 10 mm
- 177 x M3 nut 6 x 10 mm
- 3 x nut M3 5.5 x 5.5 mm
- 3 x safety nut M4
- 23 x safety nut M3
- 1 x DC motor distance
- 6 x bearing M8 16 mm
- 4 x wheel 65 mm
- 4 x 7 mm nylon distance
- 8 x 8 mm nylon distance
- 2 x distance brass M3 8 mm
- 20 x C-type connector
- 4 x 90° connector
- 16 x 45° connector
- 11 x L-type connector - inverted - right
- 20 x straight connector
- 6 x L-type connector - inverted - left
- 3 x L-type connector
- 4 x triple connector
- 16 x double sided bracket
- 6 x beam bracket
- 2 x distance 6 mm
- 3 x 12 mm wheel mount
- 1 x motor with 25 mm gearbox
- 1 x 25 mm motor holder
- 1 x 12 mm wheel mount
- 6 x bearing cover
- 3 x bearing axis
- 15 x 2 cm beam
- 4 x beam 3 cm
- 8 x beam 5 cm
- 2 x 6 cm beam
- 1 x 7 cm beam
- 3 x 8 cm beam
- 2 x beam 9 cm
- 3 x 12 cm beam
- 2 x beam 15 cm
- 2 x 16 cm beam
- 2 x beam 17 cm
- 5 x 40 mm aluminium beam
- 5 x 100 mm clamp
Specification for TotemMaker TRK-TR1 remote control car kit
- Control: Bluetooth
- Power supply: Li-Ion 11.1 V 3200 mAh battery
- Construction time: ~ 5hours
- Destiny: Children over 11 years of age
- Tools:
- Screwdriver
- imbus
- wrench
Useful links |
