- New
Products for which the sale has been cancelled.
- New
- New
- Reduced price
- Promotion
BD65496MUV - single-channel motor controller 16V/1,2A - Pololu 2960
Index: PLL-04238
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Step-Up/Step-Down Voltage Regulator S13V15F5 - 5V 1,5A - Pololu 4084
Index: PLL-21021
- Reduced price
- Promotion
- Reduced price
- Promotion
M40180H10 lens M12 mount 1,8mm for Arducam cameras - Arducam LN006
Index: ACM-19353
- On sale!
- Promotion
- Reduced price
- Promotion
Withdrawn products
Loading...
Set of holders for flat cables 4/4mm - white - 100pcs
S et of holders with nails. Allows you to mount the wires to the floor or walls. Suitable for antennas, alarms, network and CCTV cameras .
Index: ENT-07518
Index: ENT-07518
- EOL
Start printing in 3D - Creality Ender-3 V3 SE + filament set 3.95 kg
Start printing - the Creality Ender-3 V3 SE 3D printer kit is the perfect proposition for people who want to discover 3D printing and take your first steps there. The set...
Index: ZES-18608
Index: ZES-18608
- EOL
Grove - current sensor ASC725 - 10A
Popular ASC725 current sensor based on Hall effect, equipped with Grove interface significantly facilitating the use of the sensor with Arduino and Raspberry Pi. Sensor needs...
Index: SEE-14421
Index: SEE-14421
- EOL
MI:sound speaker board for BBC micro:bit - Kitronik 5649-V2
The Kitronik MI:sound is a module with built-in speaker, designed for BBC micro:bit versions v1 and v2. The board features a built-in speaker, a CR2032 battery holder, a...
Index: KTR-19085
Index: KTR-19085
- EOL
TUYA WMLS1 - motion and light sensor PIR LUX WiFi RTX
Motion sensor (PIR) and light capable of detecting movement within a range of up to 6 meters and an angle of 82 ° and measuring the level of light . Works with...
Index: REM-22616
Index: REM-22616
- EOL
HAT Hacker HAT - Raspberry Pi GPIO expander - Pimoroni PIM511
Overlay for Raspberry Pi by Pimoroni. The module comes with two 40-pin goldpin strips where you can connect two overlays at the same time. It is ideal for prototyping,...
Index: PIM-18915
Index: PIM-18915
- EOL
Button SHIM Hat buttons - module for Raspberry Pi
Shield for Raspberry Pi, expanding minicomputer with five physical buttons and a status LED RGB.
Index: PIM-10630
Index: PIM-10630
- EOL
Solid state relay SSR Fotek 10DA - 10A 380VAC / 32VDC
Solid state relay is used for contactless switching of the devices of high power. It is characterized by rapid time switching and quiet operation.
Index: DLT-14498
Index: DLT-14498
- EOL
Solid state relay SSR Fotek-40DA 40A 480VAC / 32VDC
Relay made in the semiconductor technology SSR Fotek with a working voltage up to 380 V and maximum load current of 40 A.
Index: DLT-14500
Index: DLT-14500
- EOL
Solid state relay SSR Fotek 50DA 50A 480VAC / 32VDC
Relay made in semiconductor technology SSR Fotek with an output voltage of up to 380 VAC and the control, input voltage of up to 32 VDC. Output current up to 50 A .
Index: DLT-14501
Index: DLT-14501
- EOL
On-Off switch MK1012O type 0 250V/3A - black
On-Off switch. The load capacity of the contacts is 250 V / 3 A.
Index: KAB-03713
Index: KAB-03713
- EOL
Grove - capacitive fingerprint scanner KCT203 - UART - Seeedsudio 101020713
The capacitive fingerprint reader module, based on the KCT203 chip, has a built-in high performance GD32 main circuit, a vertical RF push fingerprint reader and a touch...
Index: SEE-15928
Index: SEE-15928
- EOL
FEP Protect - anti-adhesive spray for FEP - 50ml
FEP Protect is a special anti-adhesive spray liquid , which, properly distributed on the surface of FEP, improves the non-stick properties of the film , and at the same time...
Index: BFG-22563
Index: BFG-22563
- EOL
Grove E-paper E-Ink 1.54 "152x152px - display module with tricolor TFT for Arduino
Module with a three-colour electrophoretic display with a 1.54" TFT e-paper active matrix with a resolution of 152 x 152 px. 1-bit screen with possibility of displaying white,...
Index: SEE-14339
Index: SEE-14339
- EOL
Tamiya 70192 Slick Wheel Set - 4pcs.
Set includes four wheels with a diameter of 31 mm and a width of 10 mm.
Index: PLL-00014
Index: PLL-00014
- EOL
Index: BAT-03864
- EOL
Skrilab laboratory - robotics and 3D printing lab
Equipment for schools supporting teachers in conducting interesting classes in the field of computer science and robotics . The workshop consists of a 3D Skrinter printer,...
Index: SKR-22502
Index: SKR-22502
- EOL
Circuitmess Nibble type F educational kit - game console for self-assembly
DIY kit designed for self-assembly of Nibble console type F from Circuitmess. Thanks to the user's manual you will learn how to assemble the game console yourself using...
Index: CIM-18555
Index: CIM-18555
- EOL
4-pin angled printing plug, raster 5,08mm
Plug for the print, angled, 4-pin, pitch of 5.08 mm. Plug dimensions: 23.5 x 12.4 x 8.5 mm
Index: KAB-03921
Index: KAB-03921
- EOL
VESA mounting bracket - for LattePanda cases - DFRobot FIT0899
A practical mounting bracket that allows you to place the module in the housing on the back of the monitor . The holder was designed for use with LattePanda minicomputer...
Index: DFR-22458
Index: DFR-22458
- EOL
C-Back NB-loT communication module - SIM7020G - for M5StickC and M5StickC Plus - M5Stack A113
C-Back NB-loT is an NB-IoT communication module adapted to work with M5Stack modules of the M5StickC and M5StickC Plus series. The module is equipped with the SIM7020G chip,...
Index: MSS-22450
Index: MSS-22450
- EOL
TV-socket antenna connector adapter F - 25pcs.
A switch to connect the cable terminated with an F-plug to the TV antenna outlet used in TV sets and DVB-T receivers. Price per 25 pieces .
Index: LEC-18420
Index: LEC-18420
- EOL
Power supply KSAS0181200150HE 12V/1,5A - DC plug 5,5/2,5mm
Stabilized mains power supply. Supply voltage: 200 V to 240 V. Output voltage: 12 VDC. Output current: 1.5 A. Connector: DC plug 5,5 / 2,5 mm.
Index: KAB-04022
Index: KAB-04022
- EOL
Grove UART WizFi360 - WiFi wireless communication module - Seeedstudio 101991033
WiFi wireless communication module equipped with the WizFi360 chip. It supports the wireless band from 2.4 GHz to 2.5 GHz and is compatible with 802.11 b/g/n standards. It...
Index: SEE-22417
Index: SEE-22417
- EOL