- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Li-Pol pack Redox 4400 mAh 20C 3S 11.1 V
This lithium polymer battery pack from Redox has a capacity of 4400 mAh and consists of three cells. The output voltage is 11.1 V and the constant discharge current is 20 C (88 A). The battery terminals are 10 cm long cables terminated with a XT90 socket and a 3EModel/Redox balancer output. Li-Pol batteries are often used in modeling and robotics.
Proper charging of Li-Pol batteries
When using Li-Pol packs you should pay special attention to proper charging of cells. It is important to keep the cells balanced, i.e. to evenly charge (to the same voltage level) each of the individual cells in relation to the others. There are many chargers for Li-Pol packs, both simple compact and advanced microprocessor based chargers are available.
Storage is also an important issue. If the cells will not be used for a long time, it is a good idea to put them into the Storage level (microprocessor chargers have a program that will automatically put the packs into this state). This mode will charge or discharge the pack to the level of 3.7 V per cell - which is the best voltage in the context of Li-Pol pack performance, as well as its lifetime.
Li-Pol Redox 4400 mAh 20C 3S 11.1 V battery pack.
The Li-Pol Redox 4400 mAh pack has an XT90 connector.
Battery specifications
- Manufacturer: Redox
- Battery type: lithium polymer
- Cable length: 10 cm
- Connectors: XT90 socket and output for balancer type 3EModel/Redox
- Maximum charging current: 1C (4.4 A)
- Voltage: 11,1 V
- Capacity: 4400 mAh
- Constant discharge current: 88 A (20C)
- Battery dimensions: 130 x 43 x 25 mm
- Weight: 280 g
We also offer chargers adapted to battery pack connectors.
ATTENTION!
Before using the battery it is necessary to read the LI-POL BATTERY USE AND WARRANTY TERMS!
