- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Li-Pol pack Redox 5000 mAh 30C 2S 7.4 V
Redox brand lithium polymer battery pack with a capacity of 5000 mAh, consists of two cells. The output voltage is 7.4 V, and the constant discharge current is 30 C (150 A). The outputs of the battery are cables terminated with XT90 socket and output to the balancer. Li-Pol batteries are often used in modeling and robotics.
Li-Pol Redox 5000 mAh 30C 2S 7.4 V battery.
The Li-Pol Redox 5000 mAh pack has an XT90 connector.Redox battery specification
- Battery type: lithium-polymer
- Connectors: XT90 socket and output to the balancer
- XT90 cable length: 10 cm
- Maximum charging current: 1C (5 A)
- Voltage: 7,4 V
- Capacity: 5000 mAh
- Constant discharge current: 150 A (30C)
- Battery dimensions: 127 x 43 x 19 mm
- Weight: 241.5 g
We also offer chargers matched to the pack connectors.
What charger to choose for Li-Pol batteries?
When using Li-Pol packs you should pay special attention to proper charging of cells. It is important to maintain balanced cells, i.e. to evenly charge (to the same voltage level) each of the cells in relation to the others. There are many chargers for Li-Pol packs. We recommend the simplest compact chargers or advanced microprocessor based chargers available in our range. Storage of the packs is also an important issue. If the cells will not be used for a long time it is worth putting them into the Storage level (microprocessor chargers have a program that will automatically put the packs into this state). This mode will charge or discharge the pack to the level of 3.7 V per cell - which is the best voltage in the context of Li-Pol pack performance, as well as its life.
CAUTION!
Before use, be sure to read the LI-POL BATTERY USE AND WARRANTY TERMS!
