- EOL
|
Attention! The sale of the product has been completed. Check otherdevices in this category. |
Description
Wireless network card Netis WF2150 N standard working in two ranges: 2.4 GHz and 5 GHz with speeds up to 300 Mbps. Works with Windows 7, 8, 8.1, Mac and Linux. It can be used as a WiFi adapter in Raspberry Pi minicomputers, without the need to install drivers.
The card is dedicated for solutions where two network ranges are required: fast, crystal-clear 5GHz network and for regular 2.4GHz network. It is also useful in places where there are already several 2.4 GHz networks that may interfere with the signal and degrade it. The module is ideal for online gaming, video streaming and VoIP Internet calls.
Netis WF2150 also has the ability to act as Access Point for many users.
|
The card, when connected to Raspberry Pi, makes it impossible to connect another device to the neighboring USB port, but the other two connectors remain fully usable. Although the card works directly from the Raspberry USB port, using the two 2.4 GHz and 5 GHz bands it may be necessary to usean active hub asadditional power source. |
Specification
- Standards supported: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
- Signal frequency: 2.4 GHz and 5 GHz
- WPS button - connect to the WiFi network with one button
- Security:
- 64/128 bit WEP
- WPA-PSK
- WPA2-PSK
- SSID Broadcast Enable/Disable
- Wireless MAC Filtering
- Supported operating systems:
- Windows XP/Vista/7/8/8.1
- MAC OS
- Linux (including Raspbian)
- Interface: USB 2.0
- Dimensions: 92.5 x 17 x 7 mm
