- New
- New
- Sale
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 52
Loading...
DIP switch 5-pole - red - 5psc.
Slide switch, board with five levers. Leads Raster: 2.54 mm Housing height: 5.5 mm
Index: SWT-00371
Index: SWT-00371
Linear voltage regulator LDO 5V LM1117T-5.0 - THT TO220
Low-Dropout linear stabilizer. Output voltage: 5 V. Maximum output current: 1.5 A. TO220 housing.
Index: UCC-00791
Index: UCC-00791
Ethernet network module ENC28J60 mini
A module that enables the connection of the microcontrollers and development kits , including the Arduino, with the Ethernet network via the SPI interface. The system in...
Index: MOD-01512
Index: MOD-01512
QTR-1A reflectance sensor - 2pcs. - Pololu 2458
Two modules with QTR reflective sensors. They have an analog output. The supply voltage is 5 V.
Index: PLL-01842
Index: PLL-01842
MCP3424 - ADC 18-bit 4-channel I2C converter
Module with analog-digital converter, delta-sigma type with 18-bit precision. It is equipped with four channels with differential inputs. It works at speed of up to 240 samples...
Index: DFR-03036
Index: DFR-03036
Alcohol sensor MQ-3 - semiconductor - blue module
Module with the alcohol sensor MQ-3 with the goldpin pins, pitch of 2.54 mm. It is powered with the voltage of 5 V. It has digital and analog output, making it compatible with...
Index: MOD-03736
Index: MOD-03736
Phototransistor SFH-313FA 5mm 870nm - 5 pcs
Phototransistor in the case of 5 mm. Maximum sensitivity for the wave with the length of 870 nm. Darkened lens. 5 pcs.
Index: UCC-04245
Index: UCC-04245
Grove - set of 5 female-female 4-pin - 2mm/30cm with latch
A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. Cable length is 30 cm. Version with a latch.
Index: SEE-04398
Index: SEE-04398
NTC 110 10kΩ thermistor 5% - 10pcs.
The NTC 110 thermistor with a resistance of 10 KΩ and a tolerance of 5 %.
Index: SES-04949
Index: SES-04949
Case for Raspberry Pi LCD HDMI screen TFT 7" - black and white - Waveshare 11301
Black-and-white case for a minicomputer Raspberry Pi with an attached touch screen LCD TFT 7" from Waveshare.
Index: WSR-05843
Index: WSR-05843
SMA female connector for angular printing - 50Ω
SMA angled female connector with an impedance of 50 Ω mounted on the PCB. Used to connect antennas and receivers.
Index: KAB-06317
Index: KAB-06317
Mono 2.5W Class D Audio Amplifier - PAM8302 - Adafruit 2130
The module with class D audio amplifier. It is characterized by low power losses. It allows to connect a 4-8 ohm speaker of 2.5 W power. It has a built-in potentiometer for...
Index: ADA-06381
Index: ADA-06381
The 5-pin plug for printing, the pitch is 2.54 mm. The set includes 5 x 5-pin plugs.
Index: KAB-06773
Index: KAB-06773
Strip LED SMD5050 IP65 14,4W, 60 LED/m, 10mm, RGB - 5m
RGB LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 14.4 W/m, density of 60 diodes per meter. Protection factor IP65. Price for a package,...
Index: LED-07076
Index: LED-07076
High temperatura probe PT100 - 7x200mm
Waterproof analogue sensor with the high temperature working in the range from -200°C to 420°C. The output is resistance dependent on temperature. Probe length is 200 mm.
Index: SES-07467
Index: SES-07467
Diode Power LED Prolight Opto PM2B-3LVE-R7 3W - white warm
Power LED green 3 W in white warm color.
Index: PAS-08311
Index: PAS-08311
Brass distance sleeve - different sizes M3 - set of 120pcs
Distance sleeve which allows the mounting of printed circuit boards, brackets, modules, etc. It is used, when it is necessary to separat e electric elements. Set...
Index: KAB-09700
Index: KAB-09700
APDS9960 Proximity, Light, Color and Gesture Sensor - STEMMA QT/Qwiic - Adafruit 3595
The sensor, which can detect simple gestures, light of the surroundings, color and approaching obstacles. The device communicates with a microcontroller via the I2C bus. It...
Index: ADA-09815
Index: ADA-09815
Qwiic HAT for Raspberry Pi - SparkFun DEV-14459
Shield, type HAT for Raspberry Pi, facilitating the connection of modules SparkFun via connectors Qwiic. The shield connects the I2C bus on the Raspberry Pi with connectors Qwic.
Index: SPF-10664
Index: SPF-10664
Stand for LCD display 2x16 characters
Transparent stand for LCD display 2x16 characters. The kit includes screws for mounting.
Index: GRL-10914
Index: GRL-10914
Grove - GSR sensor - electrical resistance of the skin
Module from the Grove series equipped with GSR sensor using the galvanic-skin reaction. It is powered with the voltage of 3.3 V or 5V. The s ensors of this type are used in...
Index: SEE-11314
Index: SEE-11314
Module from the Grove series, based on the LM386 system and electret microphone. It can be powered with any voltage from 4 V to 12 V. The output is an analog signal. The sensor...
Index: SEE-11350
Index: SEE-11350
Camera ZeroCam OV5647 5MPx - night camera for Raspberry Pi Zero
Module with the camera compatible with Raspberry Pi Zero v1.3. The device has a matrix OV5647 with a resolution of 5 Mpx 2592 x 1944 px, supports HD 1080p at 30 K/sec. The...
Index: ODS-12749
Index: ODS-12749
Module with digital temperature sensor MLX90614ESF-BAA-000-TU-ND
Sensor that uses IR to measure temperature in the range from -70 °C to 380 °C. It is communicating via the I2C bus. The voltage ranges from 3.0 V to 5.0 V.
Index: GRL-13443
Index: GRL-13443