Set of filaments Spectrum Material Mix 1,75 mm 1,25 kg - 5 colors
Index: SPC-22333
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
ELECTRONICS - Strona 51
Loading...
Mini OLED display 0,42'' 72x40px - expansion Unit for Developer Modules - M5Stack U166
A mini OLED display with very compact dimensions , intended primarily for use with M5Stack Core, M5Atom and M5Stick development modules. It uses the I2C interface for...
Index: MSS-23752
Index: MSS-23752
Argon THRML fan for Raspberry Pi 5 with heatsink - silver - 60mm
Argon THRML is a cooling system with a PWM fan and heat sink , which is designed for the Raspberry Pi 5 minicomputer. Provides efficient heat dissipation thanks to the...
Index: ARG-24394
Index: ARG-24394
- Reduced price
- Promotion
Cable for analog Sharp distance sensors - Pololu 117
Cable with JST plug for analog distance sensors from Sharp company. Length: 30 cm
Index: PLL-00028
Index: PLL-00028
Electrolytic capacitor 22uF/50V 5x11mm 105C THT - 10pcs.
Through hole electrolytic capacitor of 22 uF / 50 V. Pins' pitch: 2 mm. Size: Ø5 x 11 mm. Price is for 10 pieces.
Index: PAS-00212
Index: PAS-00212
Index: LED-00457
LED diode 5 mm yellow. Transparent lens. The length of the interacting waves: approx. 590 nm, Brightness: 3500 MCD. Beam angle: 15 °. Price for 5 pieces.
Index: LED-00538
Index: LED-00538
Electrolytic capacitor 220uF/25V 8x12mm 105C THT - 10pcs
220 uF/ 25V through-hole electrolytic capacitor. Leads raster: 3.5 mm. Size: Ø8x12 mm. Price for 10 pieces.
Index: PAS-00857
Index: PAS-00857
Converter ADC MCP3008 - 10-bit 8-channel DIP
10-bit 8-channel converter analog-to-digital MCP3008-I/P in DIP case with SPI communication interface.
Index: UCC-02358
Index: UCC-02358
FT232H - USB converter for UART, SPI, I2C, GPIO - Adafruit 2264
Board allows you to communicate with the modules and sensors directly from the computer. It supports the most popular interfaces: UART, I2C, SPI, it also has some GPIO pins.
Index: ADA-03003
Index: ADA-03003
Speaker MG15 0.1W 8Ohm - 15x4mm
A speaker with a power of 0.1 W, 8 Ω, dimensions 15 x 4 mm.
Index: EAK-03467
Index: EAK-03467
Numeric self-adhesive membrane keypad - 4 keys
Simple numeric keypad with numbers: 1 to 4. Self-adhesive tape on the back for easy installation.
Index: MOD-04266
Index: MOD-04266
NTC 110 100kΩ thermistor with 1m wire
Thermistor of NTC 110 type with a resistance of 100 kΩ. The connecting cable has a length of 1 meter.
Index: SES-04941
Index: SES-04941
Eight-segment display x1 - 14mm green - common anode
Single 8-segment display with digits with points and some characters.
Index: LCD-06440
Index: LCD-06440
Strain relief boots for RJ45 8P8C wire - red - 10pcs
Rubber strain relief boots for plugs RJ45 (8P8C) color: red. Price for 10 pieces.
Index: KAB-06671
Index: KAB-06671
ArduCam OV5647 5Mpx camera for Raspberry Pi compatible with the original version
Camera module with OV5647 sensor connected to dedicated connector of Raspberry Pi minicomputer versions A, B, B+,2, 3, 3B+, 4B. The device has a 5 Mpx sensor and supports HD...
Index: ACM-06850
Index: ACM-06850
Assembly bar female 2-pin, raster 3,5mm
Seperable terminal block, female, 2-pin. Pitch of 3.5 mm. Height is 11.3 mm. Screw on the flat screwdriver (-).
Index: KAB-07094
Index: KAB-07094
Sealed cable gland with a thread of 20 mm. Prevents the cable passing through the body wall from scratching. Designed for wires with diameters from 7 mm to 12 mm.
Index: KAB-07511
Index: KAB-07511
Resistor THT 1W 4,7kΩ - 200pcs
A set of 200 resistors with the 1 W power. Elements are in the through hole THT case.
Index: PAS-08284
Index: PAS-08284
- Reduced price
- Promotion
Assembly bar male 8pin, raster 3,5mm, angular
Disconnectable terminal block, male, angled, 8-pin. Raster 3,5 mm. Height 9,20 mm.
Index: KAB-08407
Index: KAB-08407
Sealed metal cable gland - M12
Metal grommet with a 12 mm thread. Prevents the cable from abrasion, e.g. through the wall of the enclosure. Suitable for cables up to 6,5 mm in diameter.
Index: KAB-08516
Index: KAB-08516
MAX31865 - amplifier for PT100 - SPI temperature probes - Adafruit 3328
Low resistance amplifier designed for use with 2, 3 and 4 cable PT100 temperature probes. Communicates over SPI bus. Operates from 3 V to 5 V.
Index: ADA-08780
Index: ADA-08780
LED indicator 12V DC - 12mm - blue
LED light, working voltage 12 V DC. It has a diameter of 12 mm.
Index: LED-08995
Index: LED-08995
Reed switch normally - plastic 14,5mm
Reed contact in plastic straight housing, 14.5 mm long.
Index: MOD-09465
Index: MOD-09465
Rubber gland round 3mm - 10pcs
Rubber cable gland with the thread of 3 mm. Prevents the cable passing through the body wall from rubbing. Designed for wire diameters from 2 mm to 4 mm.
Index: KAB-11522
Index: KAB-11522