- Reduced price
- Sale
- Sale
- Sale
- Sale
- Sale
SENSORS - Strona 11
Loading...
Flame sensor 760-1100nm - analog - Waveshare 9521
The sensor is used to detect fire. It is powered with the voltage from 3.3 V to 5.3 V. The range of the sensed wave: from 760 nm to 1100 nm. The output is an analog voltage...
Index: WSR-04461
Index: WSR-04461
QTR-1A reflectance sensor - 2pcs. - Pololu 2458
Two modules with QTR reflective sensors. They have an analog output. The supply voltage is 5 V.
Index: PLL-01842
Index: PLL-01842
DFRobot Gravity - analogue turbidity sensor
Sensor for testing the quality of water by measuring its turbidity. Operates at 5 volts at temperatures from -30°C to 80°C.
Index: DFR-05318
Index: DFR-05318
RFID / NFC MiFare Classic sticker - 13,56MHz - Adafruit 362
The ID of the RFID /NFC identifier in the form of a sticker, is equipped with NXP S50 chip. Each chip has a unique 32-bit code. The devices work at a small distance from the...
Index: ADA-02951
Index: ADA-02951
Color sensor, light-frequency converter TCS3200 - Waveshare 9520
Module with color sensor that enables a measurement of the RGB components, the output is the frequency depend on the intensity of the selected color. It is supported by any...
Index: WSR-04932
Index: WSR-04932
MQ-135 alcohol, benzine, ammonia sensor - semiconductor
Module with sensor MQ-135 detecting benzene, alcohol and smoke . It is powered with the voltage from 2.5 V to 5 V. It has digital and analog output, making it compatible with...
Index: MOD-08243
Index: MOD-08243
Gravity URM09 - ultrasonic distance sensor 2-500cm sensor analog - DFRobot SEN0307
Module with ultrasonic distance sensor URM09, with measuring range from 2 cm to 500 cm. Supply voltage is 3.3 V to 5.5 V. The measuring frequency can reach up to 30 Hz. It...
Index: DFR-14859
Index: DFR-14859
Grove - ProtoShield - prototype board
Prototype board Grove with a soldered socket. It allows for an easy access to four lines of a standard Grove-S0, S1, VCC and GND series connection cable. The layout of the...
Index: SEE-11344
Index: SEE-11344
Inductive proximity sensor LJ18A3-8-Z / AY 8mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 8 mm. The object detection...
Index: DNG-11865
Index: DNG-11865
L3GD20H 3-axis, digital I2C SPI gyroscope - Pololu 2129
Sensor to measure the angular velocity in three axes. It works in the range of up to ±240 °/s, ±500 °/s or ±2000 °/sec. It communicates via the I2C or SPI bus, it has the...
Index: PLL-02608
Index: PLL-02608
RFID / NFC MiFare Classic Tag white - 13,56MHz - Adafruit 360
The RFID /NFC identifier in the form of a white marker, is equipped with NXP S50 chip. Each chip has a unique 32-bit code. The devices work at a small distance from the...
Index: ADA-02952
Index: ADA-02952
Deflection sensor 112x6,3mm - SparkFun SEN-08606
During the bending, sensor increases its resistance. It can be used to detect the movement of your hand. Sensor length: 112 mm.
Index: SPF-02406
Index: SPF-02406
I2C hub allows you to connect several modules to one I2C bus connector on Base Shield v2 board. Using splitter you can connect 7 sensors from Grove series to one socket.
Index: SEE-04438
Index: SEE-04438
Mounting bracket for distance sensor HC-SR04 - red
Bracket for installation the distance sensor HC-SR04. It is made of red acrylic with 3 mm of thickness, it has three holes for mounting.
Index: MOD-09712
Index: MOD-09712
Grove - Cable Pigtail - 4-pin connection cable - 10cm - Adafruit 5244
Connection cable from Adafruit. On one side it has four isolated wires (each in a different color), and on the other side it has a connector compatible with the Grove...
Index: ADA-21063
Index: ADA-21063
DFRobot Gravity - vibration sensor with piezoelectric membrane
Analog vibration sensor with piezoelectric membrane. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04713
Index: DFR-04713
QTR-8RC reflectance sensor array - digital - Pololu 961
Strap with eight reflective sensors with digital output. It is powered with the voltage of 5 V or 3.3 V.
Index: PLL-00020
Index: PLL-00020
Grove - IR receiver 38kHz 940nm
IR receiver from Grove , operating at a frequency of 38 kHz with a supply voltage from 3.3 V to 5.0 V. Maximum sensitivity is observed for the wave length of 940 nm.
Index: SEE-04419
Index: SEE-04419
Strain Beam Module - with 24-bit ADC NAU7802 - STEMMA QT / Qwiic - Adafruit 4538
This Adafruit module, equipped with the NAU7802 , allows you to read data from strain gauge beams . It includes a very high-resolution 24-bit differential ADC with...
Index: ADA-21578
Index: ADA-21578
Limit switch with folding roller - WK828
Limit switch with lever ended with roller. Maximum operating parameters: voltage of 250 V and current of 16 A.
Index: AKS-11239
Index: AKS-11239
Sonoff SNZB-02P - smart temperature and humidity sensor - ZigBee - Android/iOS application
The Sonoff smart temperature and humidity sensor is an advanced device for precise monitoring of environmental conditions in your home. Thanks to integration with the Zigbee...
Index: INN-25115
Index: INN-25115
Grove - capacitive humidity sensor - corrosion resistant
The device is used to measure the soil moisture by the capacitive detection. It has a built in voltage regulator which provides an operating voltage in the range from 3.3 V to...
Index: SEE-13967
Index: SEE-13967
Inveo Nano TEMP - IoT module with temperature sensor
Inveo module allows remote measurement of temperature via the Internet. It features a waterproof probe with DS18B20 temperature sensor and a 1m long wire.
Index: INV-09121
Index: INV-09121
IR beam interruption sensor - LED 3mm - 0-200cm
A motion sensor that detects the interruption of the infrared light beam transmitted between the transmitter and the receiver . The detection range is 0 cm to 200 cm ....
Index: DNG-18692
Index: DNG-18692