- Sale
- Sale
- Sale
- Sale
SENSORS - Strona 40
Loading...
ACS711EX current sensor ACS711EX -15A to + 15A - Pololu 2452
Current sensor working in the range of +/-15 A based on the Hall effect. The output is an analog voltage. Supply voltage is from 3.0 V to 5.5 V.
Index: PLL-01690
Index: PLL-01690
Gravity - analog water pressure sensor - DFRobot SEN0257
Analog sensor designed to measure water pressure, manufactured by DFRobot. It uses a 3-pin Gravity interface. The supported input voltage (standard) is 5 V , and the...
Index: DFR-19273
Index: DFR-19273
Magnetic sensor - reed contact CMD615
Wireless proximity sensor activated magnetically. Case dimensions 15 x 6.5 mm.
Index: AKS-10154
Index: AKS-10154
Reflectance sensor KTIR0711S - with connectors
Module with reflective sensor KTIR0711S powered with the voltage of up to 5 V. It is characterized by small dimensions: 9 x 14 mm. It has soldered goldpin connectors.
Index: MOD-01744
Index: MOD-01744
Proximity sensor HSDL-9100-021 60mm
Miniature proximity sensor from Avago Technologies to detect objects at a distance from 0 to 60 mm.
Index: SES-01401
Index: SES-01401
- Discontinued product
Lidar TF Luna- laser distance sensor - 8m - UART/I2C
Very accurate laser sensor measuring distance from 0.2 m to 8 m with an accuracy of 0.06 m . The sensor is powered by 5 V. Lidar TF Luna communicates via UART or I2C...
Index: BEN-16638
Index: BEN-16638
BNO085 9-DOF IMU Fusion Breakout - 3-axis accelerometer, magnetometer and gyroscope - Adafruit 4754
Sensor based on the BNO085 system equipped with an accelerometer, magnetometer and gyroscope. Allows you to measure acceleration, spatial orientation, and where the strongest...
Index: ADA-22113
Index: ADA-22113
Gravity - microwave sensor for motion detection V2.0 - DFRobot SEN0192
The sensor uses the Doppler effect to detect the movement of objects. By using microwaves instead of infrared, it is possible to detect objects reflecting waves in the...
Index: DFR-05497
Index: DFR-05497
Gravity: Analog Liquid Level Sensor (FS-IR02)
Photoelectric liquid's level sensor. It has high sensitivity without the need to use the mechanical parts. The probe withstands high temperature and high pressure.
Index: DFR-06612
Index: DFR-06612
Stand for the Sharp digital sensor - Pololu 1133
PCB stand facilitating the connection of digital distance Sharp sensor with the main module of the project.
Index: PLL-00034
Index: PLL-00034
- Discontinued product
Sensor / probe for measuring soil moisture - analog - Iduino ME110
The sensor to determine the moisture level of the soil. It is powered with the voltage from 3.3 V to 5 V. The output is the analog voltage which increases its value with...
Index: OST-14249
Index: OST-14249
Encoder 24 impulse 20mm - EC12 vertical - 5pcs.
Knob in the form of an encoder that allows you to create a simple user interface. The module sends the digital signal to one of the two pins, depending on the direction of...
Index: MOD-06905
Index: MOD-06905
- Discontinued product
- SPECIAL OFFERS
Module with Hall sensor - Iduino SE014
The module with the Hall sensor, the detection range of the magnetic field is regulated with the potentiometer. It has a built-in digital and analog connector. Powered with the...
Index: OST-14293
Index: OST-14293
Waterproof probe with temperature sensor DS18B20 - 2m - brown - silicone
Waterproof probe is equipped with a digital thermometer DS18B20 with cable with the length of 2 meters. Version with silicone wire is characterized by the greater strength.
Index: DNG-10933
Index: DNG-10933
Soil moisture sensor with 12V relay - HC-13
The sensor to determine the moisture level of the soil. When it exceeds the level set by the potentiometer, the LED lights up and switched are the contacts oc the relay. The...
Index: MOD-02172
Index: MOD-02172
Distance sensor, reflective 3,3V/5V - Iduino ST1140
The module is equipped with IR reflective sensor equipped with digital output. It works with a supply voltage from 3.3 V to 5 V. It is applied in the robots tracking the line.
Index: OST-14274
Index: OST-14274
DFRobot Gravity - analog sensor of ambient light
Analog ambient light sensor PT550 compatible with Arduino and Raspberry Pi. The sensor allows to determine the light density and reflects the analog voltage signal back to...
Index: DFR-10839
Index: DFR-10839
High temperatura probe PT100 - 6x50mm
Waterproof analogue sensor with the high temperature working in the range from -30 °C to 250 °C. The output is resistance dependent on temperature. Probe length is 50 mm.
Index: SES-07469
Index: SES-07469
TEMT6000 - analog light intensity sensor module - SparkFun BOB-08688
An analog sensor measures the ambient light intensity. It works just like a regular transistor - the greater the intensity of the incident light, the higher the output voltage....
Index: SPF-02260
Index: SPF-02260
- Discontinued product
DIY kit for smog sensor - air purity sensor PM2.5 and PM10
The kit allows to build your own meter of smog. The kit includes wi-fi ESP8266 module + NodeMCU v3, the sensor PMS7003, adapter for the PMS sensor, humidity sensor, microUSB...
Index: SES-13434
Index: SES-13434
- Discontinued product
Grove - a speaker with a digital interface
Speaker module Grove is a device controlled by the PWM signal. It c an work as a simple buzzer or audio player. The volume is adjustable with the built in potentiometer. The...
Index: SEE-11352
Index: SEE-11352
- Discontinued product
Non-contact Capacitive Liquid Level Sensor - DFRobot SEN0368
Non-contact capacitive liquid level sensor with status indicator and adjustable sensitivity . This product can be used to detect liquids in non-metallic containers or pipes...
Index: DFR-19247
Index: DFR-19247
Gravity - Analog Waterproof Capacitive Soil Moisture Sensor V2.0 - DFRobot SEN0308
The device is designed to measure soil moisture by means of capacitive detection. DFRobot product has increased water resistance . It can be placed in the soil for a long...
Index: DFR-17377
Index: DFR-17377
Waterproof probe with temperature sensor DS18B20 - Okystar - 10m
High quality probe with DS18B20 digital temperature sensor. The probe's housing is watertight and waterproof, made of stainless steel. The probe can measure temperatures from...
Index: OKY-16557
Index: OKY-16557