List of products by brand Allo Sparky - Strona 2
Case Raspberry Pi 3/2 and for overlays Allo Boss acrylic transparent
Transparent acrylic case for Raspberry PI minicomputer in versions 3B, 2B and BOSS hats. Case with external dimensions 155 x 95 x 45 mm.- EOL
Aluminium case for Raspberry Pi 3/2 + Allo Boss - black
Black aluminum case for Raspberry PI minicomputer in version 3B+/3B/2B and BOSS shields. Case with external dimensions of 105 x 93 x 38 mm.- EOL
Allo Volt+D AMP - amplifier with a silencer - 2 x 60W
The set includes a high-end Volt+ amplifier with a stepper damper. The hardware is enclosed in a spectacular acrylic housing.- EOL
Allo Sparky - ARM Cortex A9 Quad-Core 1,1GHz + 1GB RAM
Minicomputer Sparky with a powerful processor ARM Cortex A9 quad-core 32-bit 1.1 GHz. The board has 1GB of DDR3 RAM, built-in Gigabit Ethernet port, HDMI 2.0 1080p/60 Hz, 2 x...- EOL
Case for USBridge Sig and DigiOne Signature - aluminum black
Black aluminium housing for Allo USBridge Sig and DigiOne Signature modules. The enclosure protects the modules from dust and damage. The enclosure has holes drilled into...- EOL
Memory card MicroSD 16GB 45MB/s class 10 + Ubuntu system for Allo Sparky
Memory card 8 GB and class 10 with Ubuntu system, working with minicomputer Sparky. Read speed: up to 45 MB/sec, save speed: up to 17 MB/sec.- EOL
Allo Cheapo - sound card with headphone amplifier for Sparky
Extension type HAT for minicomputer Sparky and Kali. Sound card Slave DAC 192 kHz with integrated headphone amplifier TPA6133A2 138 MW. It has connectors RCA, mini Jack and...- EOL
Allo Lamp Kit - lamp for Raspberry Pi Zero
Lamp housing made of acrylic for self-assembly. The light source is RGB LED Hat connected to the Raspberry Pi.- EOL
Sparky USBridge - digital sound relay + eMMC adapter + transparent case
USBridge is a board with digital audio relay, it transmits sound via USB port. Board is connected with minicomputer Sparky, has the eMMC adapter, it is in the form of a microSD...- EOL
Allo Sparky USBridge - digital sound relay + eMMC adapter + aluminum case
USBridge is a board with digital audio relay, it transmits sound via the USB port. Board is connected to the minicomputer Sparky, it has an eMMC adapter in the form of a...- EOL
Case for do Allo Sparky USBridge - aluminum
Black aluminum case for USBridge with dimensions 110 x 80 x 50 mm. The set also includes non-slip feet.- EOL
Case for Raspberry Pi 4B and for Allo DigiOne - acrylic - black
The housing is dedicated to the Raspberry Pi microcontroller version 4B and to the Allo DigiOne overlay. It protects the modules from mechanical damage and dust, while...- EOL
Allo I2S Isolator V1.3 Clean Power - galvanic isolator SBC - DAC
A galvanic isolator between a minicomputer and a DAC sound card in the form of an overlay for Raspberry Pi, compatible with Katana and BOSS DAC overlays. I2C, I2S and...- EOL
Allo Mini Boss DAC - sound card for Raspberry Pi Zero
Shield of type Hat for Raspberry Pi Zero with RCA connectors. It is used in high quality device, system DAC running in master mode based on the system PCM5122 delivers sound...- EOL
Allo Katana DAC Pure THD Opamp - soundcard for Raspberry Pi
Shield, type Hat for Raspberry Pi, version 3B+ / 3B / 2B with RCA connectors. It is used in device of high quality, system DAC is based on the ESS SABRE 9038 chipset, working...- EOL
Allo Volt+ AMP Attenuator - amplifier with a silencer
Amplifier kit VOLT + AMP together with a stepper silncer, the whole was covered in acrylic, transparent case.- EOL
Allo Volt+ Amp - amplifier class D 2x50W
Class D amplifier with power 2 x 50 W with noise cancelling. It has slight power loss. It has an RCA connector, and a potentiometer to adjust the volume. Works as a standalone...- EOL
Case for Raspberry Pi 3B+/3B/2B and Allo Katana DAC - transparent
Transparent acrylic case for Raspberry PI minicomputera in versions 3B+, 3B, 2B and Katana DAC. Case with external dimensions 135 x 105 x 60 mm.- EOL
Allo Relay Attenuator - relay volume attenuator - 64x
Relay Attenuator is a hardware volume controller. It was designed to suppress the audio at the exit of the shield Piano DAC with 1 dB per step. It has 6 small relays with...- EOL
Allo Capacitance Multiplier - noise reducer
The device is used to reduce the output ripple and noise of any power supply for low values, below 5 mV up to 1 MHz. It's not the voltage regulator.- EOL
Allo Volt Amp- amplifier class D for Piano 2.1
Class D amplifier with power of 2 x 50 W, it is designed for module Piano 2.1. It is charcterized by minor power loss. It does not have RCA connectors.- EOL
Allo Lamp Kit - Raspberry Pi Zero lamp
Lamp for self-assembly, the main light element is the Raspberry Pi Zero with the LED matrix. It can be used as, for example, a night light or office lamp.- EOL
Allo Katana DAC SQ Opamp - sound card for Raspberry Pi
Shield of Hat type for Raspberry Pi, version 3B+ / 3B / 2B with RCA connectors. It is used in device of high quality, system DAC is based on the ESS SABRE 9038 chipset,...- EOL