List of products by brand Z-Wave
Similar to Wi-Fi and Bluetooth, Z-Wave is also a protocol that enables wireless connection. This allows various devices operating in the Z-Wave standard to communicate with each other in a reliable manner without interference at significantly reduced power consumption along with ensuring a high level of security in data encryption. Thanks to wireless communication the problems connected with laying communication cables in a building are eliminated. Z-Wave communication operates in the low frequency range and allows devices to communicate at a distance of up to approx. 150 m. Additionally, thanks to the use of communication technology in a mesh structure, signal transmission is resistant to interference. Devices supporting the Z-Wave protocol can also be modified and extended with further modules. Installation, commissioning and operation of Z-Wave modules is very easy, also for beginners.
- EOL
Danfoss Living Connect Z-Wave 014G0013 - a thermostatic head for heaters
Electronic thermostatic head designed to control heaters with adapters RA-N and M30 x 1.5. Controlled via a built-in three-buttons or remotely via the Z-Wave controller. The...- EOL
Aeotec Door/Window Sensor 6 ZW-112-C
Wireless sensor for opening doors and windows communicating via Z-Wave Gen5. Closed in a triangular body imitating a window or door corner. It operates using rechargeable...- EOL
Eurotronic Spirit - Heating panel thermostat
Electronic thermostatic head designed to control the radiators with RAV, RA, RAVL and M30 x 1.5 adapters. Controlled via three built-in button or remotely via a Z-Wave...- EOL
Aeotec Door/Window Sensor 7 - Z-Wave
The door and window sensor allows you to wirelessly check whether doors or windows are open, closed or ajar. The module communicates via the Z-Wave Plus network. The small...- EOL
ZWE Connect POPP POPE010101 Z-Wave - a thermostatic head for heaters
Thermostatic electronic head to control the radiator temperature. It is installed with the included RA-N and M30 x 1.5 adapters. The temperature reading is shown on the display...- EOL
RaZberry 2 EU - Z-Wave module for Raspberry Pi
Module changing Raspberry Pi into a gateway for the Z-Wave home automation Z-Wave. Allows to control the devices via smartphone or web browser. The interface uses Java Script -...- EOL
Aeotec Z-Stick Gen5 - Z-Wave USB module
The Z-Wave module with a USB connector that can be connected to any computer with USB connector. Works with all certified Z-Wave devices regardless of manufacturer. It has a...- EOL
Aeotec Range Extender 6 ZW117 Z-Wave
A device improving and amplifying power and signal range between devices operating in Z-Wave network. No additional wiring is required, just plug it into the power outlet....- EOL
Aeotec Multisensor 6 ZW100-C - motion, light, vibration, temperature, humidity and UV sensor Z-Wave
Multisensor has six different sensors: motion (PIR), light, vibrations, temperature, humidity and UV, all enclosed in a compact case 46 x 46 x 40 mm. The Ssnsor operates using...- EOL
LED Bulb Aeotec 6 Multi-White - bulb LED E27 - different shades of white light
LED light bulb powered by 220-240V with E27 screw. Consumes only 9 watts. It has a built-in Z-Wave Protocol receiver, so it can be controlled remotely and wirelessly. The lamp...- EOL
LED bulb Domitech ZBulb - E27, 9W, adjustable brightness - Z-Wave
230V LED bulb with E27 thread. It consumes only 9 W of power. It has a built-in receiver for Z-Wave protocol so that it can be controlled remotely and wirelessly Light color is...- EOL
Aeotec Radiator Thermostat - intelligent Z-Wave thermostatic head
Aeotec Radiator Thermostat is a wireless , battery-powered thermostatic head that works in the Z-Wave protocol. It allows for remote temperature control and allows you to...- EOL
Smart Z-Wave thermostat - Donexon Pro
Donexon Pro thermostatic head by Danfoss for radiators. The intelligent head is equipped with the Z-Wave 868.42 MHz communication system, which is compatible with e.g....- EOL
Smart Z-Wave thermostat - Donexon varmo TZ eco
The intelligent Donexon varmo TZ eco thermostatic head, equipped with the Z-Wave Plus communication system, thanks to which you can easily adjust the temperature in the room...- EOL
Aeotec Door/Window Sensor Gen5 ZW-120-C
Wireless sensor for opening doors and windows communicating via Z-Wave Gen5. It operates using battery that can withstand up to 400 days.- EOL
Intelligent LED bulb Zipato RGBW Bulb - E27, 7W, 600lm - Z-Wave
LED light bulb powered by 230V with E27 screw. Consumes only 7 watts. It has a built-in Z-Wave Protocol receiver, so it can be controlled remotely and wirelessly. The lamp can...- EOL
Serial Adapter Board for Z-Wave
The module connects serial transmission with Z-Wave protocol. On the basis of the Z-Wave module 300 loaded with firmware Z-Wave.Me and 32 KB memory EEPROM. It has 5-pin...- EOL
Intelligent LED bulb Zipato RGBW Bulb 2 - E27, 9W, 806lm - Z-Wave
LED light bulb powered by 230V with E27 screw. Consumes only 9 watts. It has a built-in Z-Wave Protocol receiver, so it can be controlled remotely and wirelessly. The lamp can...- EOL
Z-Wave - possibility to cooperate with many different devices
In Botland store we sell various devices and extension modules that are compatible with Z-Wave communication protocol. Due to the high degree of hardware compatibility, Z-Wave protocol allows for cooperation with many devices from different manufacturers. In this way we can create a thoroughly expanded network of automation devices and control many processes in parallel in an autonomous way while maintaining very good wireless network conditions. Combining all these advantages, you can turn your home into a comprehensive intelligent building. We invite you to read the details of our wide offer of Z-Wave modules!
Z-Wave - the ideal method of communication when creating smart home projects
Executive modules which support the Z-Wave communication protocol allow for comprehensive development of building automation systems, as well as cooperation with other devices when creating advanced embedded systems. For example, one of the most popular embedded platforms, which are Arduino and Raspberry Pi, can be used in tens of thousands of embedded applications - this also applies to building automation systems. Such single board computers can also work with modules that support the Z-Wave communication protocol. Home automation devices can also be controlled from the desktop. For that purpose the Z-Wave USB module perfectly fulfils its task and can cooperate with Windows, Apple OS and Linux distributions. We also offer practical temperature and humidity sensors, dusk sensors and others. They perform a very important function - as a source of information for the controller in order to, for example, turn the lights on or off or exceed the temperature of the heating and air conditioning system. We also offer fire detectors, signal amplifiers and UART to Z-Wave converters.