ELECTRONICS - Strona 63
Controller L9110 with DC motor and fan
Fan made of plastic with a DC motor and the control unit of the direction of rotation based on the system L9110 with digital outputs. It has the ability to blow out the flame...LED indicator 230V AC - 28mm - red
LED light, operating voltage 230 V AC. It has a diameter of 28mm.LED indicator 230V AC - 28mm - yellow
LED light, operating voltage 230 V AC. It has a diameter of 28 mm.Reed switch normally - plastic 14,5mm
Reed contact in plastic straight housing, 14.5 mm long.Safety switch ON-OFF mushroom - 40mm
The "mushroom" safety switch with a loading capacity of contacts: 10 A for 440 V.ADC 16-bit converter - 4-channel ADS1115 - overlay for Raspberry Pi
Shield for Raspberry Pi with analog-digital converter of 16-bit accuracy and a small package MSOP-10. It has programmable data transfer speed from 8 to 860, 4 analog inputs and...E-paper E-Ink 7.5'' 800x480px - display with HAT pad for Raspberry Pi - Waveshare 13504
7.5" E-paper display in E-Ink technology with a resolution of 800 x 480 px . Works with a voltage of 3.3 V and 5 V. Intended for use with the main module. Communicates...FlexiForce Pressure Sensor - 25lbs. (1" area) - SparkFun SEN-11207
Pressure sensor reduces its resistance when the force put to the round tip, increases. The round sensor with a diameter of 25.4 mm, the maximum pressure is 11 kg.Magnetic sensor - CMD25 reed switch + screws
Wireless metal proximity sensor activated magnetically. Case dimensions - 25 x 48 mm.Blinkt! 8x adressed LED RGB - Raspberry Pi extension
Blinkt! is a shield for the Raspberry Pi mounted on GPIO connector of the minicomputer. Board has eight individually addressed RGB LEDs, ideal for adding a visual notification...ON-OFF switch monostable - PBW-12BPW - 2A / 250V - red
A salient, monostable switch with the red backlight. Contact load is 2 A for 250 V.Limit switch with lever - WK611 - 5pcs.
Limit switch with lever with the length of 25 mm. Maximum operating parameters: voltage of 250 V and current of 5 A.Limit switch mini curved - WK622 - 5 pcs.
Limit switch with lever with the length of 19 mm. Maximum working parameters are the AC voltage of 250 V and current of 3 A.DFRobot Gravity - adapter with compression connectors
Universal adapter for sensors with 3-pin clamp connector. It can be used with digital and analog modules. The module has a built-in resistor of 10K between AB and AC, which...Grove - rotary encoder with a button
Knob in a form of an encoder with a button that allows you to create a simple user interface. The module sends a digital signal to the SIGA and SIGB outputs, depending on the...Grove - Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used, for example, in game controllers. It has the possibility of detecting movement in two directions and the...Lever switch ON-OFF 12V / 20A backlit - green - Adafruit 3307
The switch with the lever equipped with 2 contacts with load capacity of 20 A and 12 V. Pins pitch is 24.2 mm, total height is 66 mm. The switch has a green backlight.Lever switch ON-OFF 12V / 20A backlit - red - Adafruit 3218
The switch with the lever equipped with 2 contacts with load capacity of 20 A and 12 V. Pins pitch is 24.2 mm, total height is 66 mm. The switch has a red backlight.BleBox AirSensor - wireless PM10 and PM2.5 air quality sensor
Complete module for detecting the presence of harmful dust inside the house as well as outdoors. It detects PM10 and PM2.5 dust. It can be supplied with voltage from 12V to 24V...Connecting cables Female-female 20cm yellow - 100pcs
Set of 100 26AWG copper connection wires with a length of 20 cm in yellow colour.Big Push Button 6cm - yellow- inclined
Big flat button with an outer diameter of 6 cm with the built-in LED illuminating the dome.Grove - push button with backlight - yellow
Module from the Grove is equipped with a button with a yellow led. It is powered with the v oltage from 3.3 V to 5 V. It has the Grove connector that allows for the direct...
