- Sale
- Sale
ELECTRONICS - Strona 62
Loading...
Plastic foot NS40 40x10mm - 4pcs
Round feet made of plastic used as a stand for various types of objects. The diameter of the leg is 40 mm and its height is 10 mm. It has a foam padding so it does not scratch...
Index: KAB-07500
Index: KAB-07500
Quick couplings UY 4CI-2006 - 5pcs
Quick connectors are used to connect two veins of the cables with a diameter of 0.5 mm. Gel-filled for protection from corrosion and moisture. Price for 5 pieces.
Index: KAB-07533
Index: KAB-07533
Markers kit for 4mm cables - 100pcs
Kit for marking cables with diameters up to 4 mm. Contains 10 markers each with numbers from 0 to 9 in different colours.
Index: KAB-07578
Index: KAB-07578
Linear voltage regulator kit - 5V-24V TO220 - 14pcs
Set of 14 popular regulators in TO220 housing.
Index: UCC-07580
Index: UCC-07580
LED strip driver - Mini - 11 keys
The module allows you to control the brightness of a single-color LED strip. It is equipped with a DC 5.5 / 2.1 mm power connector and a remote control.
Index: LED-08130
Index: LED-08130
Controller L9110 with DC motor and fan
Fan made of plastic with a DC motor and the control unit of the direction of rotation based on the system L9110 with digital outputs. It has the ability to blow out the flame...
Index: MOD-08239
Index: MOD-08239
433 MHz RFM95 radio module of the long range (Long Range: LoRa). It allows for data transmission at the distance of up to 500 m using a piece of wire as an antenna. It a lso...
Index: SEE-09086
Index: SEE-09086
Reed switch normally - plastic 14,5mm
Reed contact in plastic straight housing, 14.5 mm long.
Index: MOD-09465
Index: MOD-09465
Safety switch ON-OFF mushroom - 40mm
The "mushroom" safety switch with a loading capacity of contacts: 10 A for 440 V.
Index: NSZ-09801
Index: NSZ-09801
ADC 16-bit converter - 4-channel ADS1115 - overlay for Raspberry Pi
Shield for Raspberry Pi with analog-digital converter of 16-bit accuracy and a small package MSOP-10. It has programmable data transfer speed from 8 to 860, 4 analog inputs and...
Index: MOD-09861
Index: MOD-09861
E-paper E-Ink 7.5'' 800x480px - display with HAT pad for Raspberry Pi - Waveshare 13504
7.5" E-paper display in E-Ink technology with a resolution of 800 x 480 px . Works with a voltage of 3.3 V and 5 V. Intended for use with the main module. Communicates...
Index: WSR-09891
Index: WSR-09891
FlexiForce Pressure Sensor - 25lbs. (1" area) - SparkFun SEN-11207
Pressure sensor reduces its resistance when the force put to the round tip, increases. The round sensor with a diameter of 25.4 mm, the maximum pressure is 11 kg.
Index: SPF-10118
Index: SPF-10118
Breadboard is used for creating and testing electronic circuits in color red.
Index: AKS-10286
Index: AKS-10286
SanDisk Ultra Fit - memery USB 3.2 pendrive 32GB
USB 3.2 Ultra Flair memory from SanDisk with capacity of 32 GB. It is equipped with a small case. The device has a 5 years warranty.
Index: BAL-10583
Index: BAL-10583
Blinkt! 8x adressed LED RGB - Raspberry Pi extension
Blinkt! is a shield for the Raspberry Pi mounted on GPIO connector of the minicomputer. Board has eight individually addressed RGB LEDs, ideal for adding a visual notification...
Index: PIM-10620
Index: PIM-10620
ON-OFF switch monostable - PBW-12BPW - 2A / 250V - red
A salient, monostable switch with the red backlight. Contact load is 2 A for 250 V.
Index: AKS-10806
Index: AKS-10806
Limit switch with lever - WK611 - 5pcs.
Limit switch with lever with the length of 25 mm. Maximum operating parameters: voltage of 250 V and current of 5 A.
Index: AKS-10824
Index: AKS-10824
Limit switch mini curved - WK622 - 5 pcs.
Limit switch with lever with the length of 19 mm. Maximum working parameters are the AC voltage of 250 V and current of 3 A.
Index: AKS-11238
Index: AKS-11238
DFRobot Gravity - 12-position rotary switch V1
The module is equipped with 12-state rotary switch. It is powered with the voltage from 3.3 V to 12 V. The switch uses analog input for reading the output status, which allows...
Index: DFR-11256
Index: DFR-11256
DFRobot Gravity - adapter with compression connectors
Universal adapter for sensors with 3-pin clamp connector. It can be used with digital and analog modules. The module has a built-in resistor of 10K between AB and AC, which...
Index: DFR-11286
Index: DFR-11286
Grove - rotary encoder with a button
Knob in a form of an encoder with a button that allows you to create a simple user interface. The module sends a digital signal to the SIGA and SIGB outputs, depending on the...
Index: SEE-11309
Index: SEE-11309
Grove - Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used, for example, in game controllers. It has the possibility of detecting movement in two directions and the...
Index: SEE-11357
Index: SEE-11357
Lever switch ON-OFF 12V / 20A backlit - green - Adafruit 3307
The switch with the lever equipped with 2 contacts with load capacity of 20 A and 12 V. Pins pitch is 24.2 mm, total height is 66 mm. The switch has a green backlight.
Index: ADA-11415
Index: ADA-11415
Lever switch ON-OFF 12V / 20A backlit - red - Adafruit 3218
The switch with the lever equipped with 2 contacts with load capacity of 20 A and 12 V. Pins pitch is 24.2 mm, total height is 66 mm. The switch has a red backlight.
Index: ADA-11417
Index: ADA-11417