- Reduced price
- Sale
Electrical Actuator Super Power Jack 2000N 7,5mm/s 12V - 44cm stroke
Index: MOT-05365
- Reduced price
- Sale
CAN Bus Module - MCP2515 - SPI - hat for Feather - Adafruit 5709
Index: ADA-22888
- Reduced price
- Sale
ELECTRONICS - Strona 61
Loading...
ON-OFF switch monostable - PBW-12BPW - 2A / 250V - red
A salient, monostable switch with the red backlight. Contact load is 2 A for 250 V.
Index: AKS-10806
Index: AKS-10806
Limit switch with lever - WK611 - 5pcs.
Limit switch with lever with the length of 25 mm. Maximum operating parameters: voltage of 250 V and current of 5 A.
Index: AKS-10824
Index: AKS-10824
Limit switch mini curved - WK622 - 5 pcs.
Limit switch with lever with the length of 19 mm. Maximum working parameters are the AC voltage of 250 V and current of 3 A.
Index: AKS-11238
Index: AKS-11238
DFRobot Gravity - 12-position rotary switch V1
The module is equipped with 12-state rotary switch. It is powered with the voltage from 3.3 V to 12 V. The switch uses analog input for reading the output status, which allows...
Index: DFR-11256
Index: DFR-11256
DFRobot Gravity - adapter with compression connectors
Universal adapter for sensors with 3-pin clamp connector. It can be used with digital and analog modules. The module has a built-in resistor of 10K between AB and AC, which...
Index: DFR-11286
Index: DFR-11286
Grove - rotary encoder with a button
Knob in a form of an encoder with a button that allows you to create a simple user interface. The module sends a digital signal to the SIGA and SIGB outputs, depending on the...
Index: SEE-11309
Index: SEE-11309
Grove - Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used, for example, in game controllers. It has the possibility of detecting movement in two directions and the...
Index: SEE-11357
Index: SEE-11357
Lever switch ON-OFF 12V / 20A backlit - green - Adafruit 3307
The switch with the lever equipped with 2 contacts with load capacity of 20 A and 12 V. Pins pitch is 24.2 mm, total height is 66 mm. The switch has a green backlight.
Index: ADA-11415
Index: ADA-11415
Lever switch ON-OFF 12V / 20A backlit - red - Adafruit 3218
The switch with the lever equipped with 2 contacts with load capacity of 20 A and 12 V. Pins pitch is 24.2 mm, total height is 66 mm. The switch has a red backlight.
Index: ADA-11417
Index: ADA-11417
BleBox AirSensor - wireless PM10 and PM2.5 air quality sensor
Complete module for detecting the presence of harmful dust inside the house as well as outdoors. It detects PM10 and PM2.5 dust. It can be supplied with voltage from 12V to 24V...
Index: BOX-11562
Index: BOX-11562
Connecting cables female-female 20cm green - 100pcs
Set of 100 copper connection cables 26AWG with a length of 20 cm in green color.
Index: DNG-11910
Index: DNG-11910
Connecting cables Female-female 20cm yellow - 100pcs
Set of 100 26AWG copper connection wires with a length of 20 cm in yellow colour.
Index: DNG-11911
Index: DNG-11911
Big Push Button 6cm - yellow- inclined
Big flat button with an outer diameter of 6 cm with the built-in LED illuminating the dome.
Index: DNG-12300
Index: DNG-12300
Grove - push button with backlight - yellow
Module from the Grove is equipped with a button with a yellow led. It is powered with the v oltage from 3.3 V to 5 V. It has the Grove connector that allows for the direct...
Index: SEE-12596
Index: SEE-12596
DFRobot Gravity: digital I2C multiplexer - 8-channel
Module with multiplexer that allows you to connect 8 different digital I2C buses to one interface, for each, there are separate pins SDA (bus of data line) and SCL (clock line...
Index: DFR-12628
Index: DFR-12628
Push button 10cm - green - flat
Big button with an outer diameter of 10 cm with the built-in green LED illuminating the dome.
Index: DNG-12667
Index: DNG-12667
Tensometric beam NA1 8kg (80N)
Strain-gauge beam operating in the range of up to 8 kg (80 N approx.). It is applied, for example, for kitchen scales, portable scales. The connecting cable has tips with the...
Index: DNG-12671
Index: DNG-12671
The module with the HAT shield for Raspberry Pi is equipped with eight HLS8L relays with a coil powered with a voltage of 5 V along with optoelectronic insulation. The system...
Index: WSR-13301
Index: WSR-13301
WM8960 - audio player I2S I2C - Waveshare 15019
Energy saving audio module with built-in microphone based on the WM8960 codec. Supports common sample rates, such as 8/11,025/22,05/44,1/48 KHz, etc. and sound effects such as...
Index: WSR-13307
Index: WSR-13307
Connecting wires female-female 20cm white- 100pcs.
Set of 100 copper connection cables with a length of 20 cm in white color.
Index: GRL-13585
Index: GRL-13585
Filament Devil Design PLA 1,75mm 1kg - Bright Green
Bright orange filament for 3D printers and special printing pens. Made of easy to process PLA. Fully biodegradable . Obtained from renewable raw materials natural....
Index: DEV-14099
Index: DEV-14099
Adapter USB 3.0 A in USB type-C OTG . It allows, for example, to connect a flash memory to the phone.
Index: LEC-14216
Index: LEC-14216
Lanberg USB Cable Type A - C 2.0 black Quick Charge 3.0 - 0,5m
Lanberg's USB 2.0 Type A - C cable, black, gives the possibility of high quality data transfer from device to device. It is also used to charge devices with symmetrical USB...
Index: IMP-14823
Index: IMP-14823
Lanberg USB Cable Type A - C 2.0 black - 0,5m
The USB 2.0 Type A - C cable, black, is used for data synchronization. It is also suitable for charging devices with USB type C input, such as smartphones, monitors, cameras,...
Index: IMP-14824
Index: IMP-14824