- New
- Sale
- Sale
- Reduced price
- Sale
DFRobot Gravity - analog sensor of TDS, purity of water for Arduino
Index: DFR-10830
- Reduced price
- Sale
- Sale
- Sale
Raspberry Pi GPIO extensions - Strona 8
Loading...
NeoKey - key matrix for switches - 76.5 x 21.5 x 4.6 mm board manufactured by Adafruit. It has space for four buttons , including the Kailh socket. Thanks to them, you can...
Index: ADA-19789
Index: ADA-19789
SparkFun Qwiic SHIM for Raspberry Pi - SparkFun DEV-15794
SparkFun Qwiic SHIM is a small module applied to the GPIO pins of Raspbery, with which you can easily equip a minicomputer with a Qwiic connector. The module is plugged...
Index: SPF-21163
Index: SPF-21163
TXB0108 - two-way, 8-channel logic converter - Adafruit 395
The module is based on a TXB0108 system, it allows you to exchange data between systems that use the most popular voltage levels: 3.3 V and 5V. It has eight channels, it...
Index: ADA-02468
Index: ADA-02468
MAX98357A decoder stereo DAC I2S - SparkFun DEV-14809
The stereo decoder's module DAC to communicate through the I2S interface. Built-in class D amplifier can provide up to 3.2 W of power to the speakers or headphones with...
Index: SPF-13062
Index: SPF-13062
Wide Input Shim KIT - power supply module for Raspberry Pi 3-16V
Module in the form of a hat for Raspberry Pi, which allows to supply power to a minicomputer with voltage from 3 V to 16 V. This allows the cooperation of different power...
Index: PIM-12350
Index: PIM-12350
MCP4725 DAC I2C converter - SparkFun BOB-12918
Digital-to-analog converter with I2C interface. The module allows you to receive signal in the form of analog voltage from any microcontroller that has I2C. It is powered with...
Index: SPF-02275
Index: SPF-02275
DRV8835 - two-channel 11V / 1,2A engine controller - overlay for Raspberry Pi - Pololu 2753
Module with two-channel circuit DRV8835 operating with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). It can be connected directly to the GPIO...
Index: PLL-02678
Index: PLL-02678
Pirate Audio Speaker -speaker with display - DAC for Raspberry Pi - Pimoroni PIM485
DAC amplifier cap for Raspberry Pi minicompouter. It has a built-in 1 W / 8 Ω speaker and a 1.3" colour IPS display. Additionally, the board is equipped with 4...
Index: PIM-15897
Index: PIM-15897
16x2 RGB LCD display I2C KeyPad for Raspberry Pi 3B+/4B - DFRobot DFR0514
An overlay produced by DFRobot for Raspberry Pi 3B+ and 4B in the form of an LCD display. The screen displays characters in a two-line layout 16x2 . It presents subtitles in...
Index: DFR-19382
Index: DFR-19382
Display HAT Mini - HAT with IPS LCD 2'' 320x240px for Raspberry Pi - PiMoroni PIM589
The Display HAT Mini from Pimoroni is a display overlay designed for any 40-pin version of the Raspberry Pi. The bright, 18-bit , 2" IPS display with a resolution of 320 x...
Index: PIM-20895
Index: PIM-20895
pHAT Stack - lead expander for Raspberry Pi - assembled kit - Pimoroni PIM322
The pHAT Stack board is the perfect solution for connecting up to 5 pHAT shields or 3 standard HAT shields to a Raspberry Pi. The kit comes fully assembled and requires no...
Index: PIM-24850
Index: PIM-24850
- Discontinued product
RS485 CAN HAT - overlay for Raspberry Pi - Waveshare 14882
Shield for Raspberry Pi, version 4B / 3B+ / 3B / 2B / Zero / Zero W with system SN65HVD230 which allows communication between CAN and SPI and the SP3485 system that...
Index: WSR-12532
Index: WSR-12532
4-channel current, voltage, and power monitor HAT for Raspberry Pi - I2C/SMBus - Waveshare 17539
The 4-Channel Current , Voltage, and Power Monitoring HAT for Raspberry Pi is an I2C/SMBus measurement module designed for monitoring power supply parameters in DC...
Index: WSR-27658
Index: WSR-27658