- Sale
- Sale
- Reduced price
- Sale
Analog time programmer TS-WF1 - with Schuko socket - Kemot URZ2001-5
Index: LEC-24140
- Reduced price
- Sale
SENSORS - Strona 21
Loading...
DFRobot Gravity - wired pump - peristaltic
Module connecting the PPM motor driver with a peristaltic pump. The control signal is compatible with a signal controlling the servos that can be used with different boards,...
Index: DFR-11460
Index: DFR-11460
DFRobot Gravity: Formaldehyde (HCHO) Sensor (Arduino & Raspberry Pi Compatible)
The sensor measures the air clarity, depending on the content of formaldehyde. It is characterized by its high stability and sensitivity and long service life. It works with...
Index: DFR-08605
Index: DFR-08605
DFRobot Gravity - digital crash sensor (right)
The module is equipped with limit switch with lever with roller, it is designed for Arduino. It is powered with the voltage of 5 V.
Index: DFR-11266
Index: DFR-11266
DFRobot Gravity - an ultraviolet UV analog sensor
The UV light sensor is powered with the voltage of 5 V. The output is an analog voltage, proportional to the intensity of UV light intensity. The sensor can be used to detect...
Index: DFR-05517
Index: DFR-05517
Photoelectric sensor SPDT E3JK-R4M1 12V IP65 - 4m
Photoelectric transmitting sensor. It detects the objects by the method of reflection. Detection range is up to 4 meters. It has Light-ON operation mode. It is powered with...
Index: AKS-10610
Index: AKS-10610
Motion sensor type PIR interface is compatible with Grove series. Object detection is indicated by a digital position in a high pin SIG. The range can be set within the range...
Index: SEE-11343
Index: SEE-11343
VL53L5CX time-of-flight - 8x8 distance sensor I2C - 400cm - Pololu 3417
The VL53L5CX laser distance sensor measures up to 400 cm using the Time-of-Fligh t method via the I2C interface. With it, it is possible to measure the absolute distance...
Index: PLL-21487
Index: PLL-21487
Grove - GrovePi+ v3.0 Shield for RaspberryPi 4/3/2/B/B+/A+
Shield for Raspberry Pi is equipped with a w15 4-pin connectors for connecting sensors from the Grove minicomputer series. It cooperates with more than a hundred modules.
Index: SEE-04451
Index: SEE-04451
Module with photoresistor + cable - analog - Iduino ST1107
Module with photoresistor for Arduino. It can be used to measure the intensity of light. It is controlled via an analog signal, is powered with the voltage of 5 V. The set...
Index: OST-14301
Index: OST-14301
Gravity - I2C/UART connection cable set - PH2.0-male - 30cm - 5pcs - DFRobot FIT0916-M
The kit includes 5 pieces of 30 cm long connection cables from DFRobot. On one side they are terminated with a female PH2.0 connector compatible with the Gravity standard,...
Index: DFR-22466
Index: DFR-22466
DFRobot Gravity: Digital shake sensor
The shock sensor reacts to movement in a certain direction, so it can detect, for example, a hand movement. It is equipped with a vibration switch, spring type which serves to...
Index: DFR-13294
Index: DFR-13294
Adjustable motion PIR sensor with an interface compatible with the Grove series. It's a simple to use passive infrared sensor. Object detection is indicated digitally - via...
Index: SEE-13813
Index: SEE-13813
Gravity - LIS2DW12 - 3-axis accelerometer ±2g/±4g/±8g/±16g - I2C - DFRobot SEN0409
Gravity module in a form of 3-axis accelerometer , which allows to measure linear acceleration. It has a built-in LIS2DW12 chip (belonging to the popular LIS series) and...
Index: DFR-19915
Index: DFR-19915
DFRobot Gravity - digital magnetic field sensor
Digital magnetic sensor can detect the magnetic object near it. The supply voltage is from 3.3 V to 5 V.
Index: DFR-11274
Index: DFR-11274
BleBox AirSensor - wireless PM10 and PM2.5 air quality sensor
Complete module for detecting the presence of harmful dust inside the house as well as outdoors. It detects PM10 and PM2.5 dust. It can be supplied with voltage from 12V to 24V...
Index: BOX-11562
Index: BOX-11562
Rebel RB-03 non-contact voltage detector
Non-contact AC voltage detector from 50 V to 1000 V . The device informs about the voltage detection by changing the frequency of sound generated by the built-in buzzer....
Index: LEC-18379
Index: LEC-18379
Gravity - TRIG URM09 ultrasonic distance sensor - DFRobot SEN0388
Ultrasonic distance measuring module produced by DFRobot with integrated URM09 chip. It detects objects at a distance from 2 cm to 500 cm . The distance is determined...
Index: DFR-19194
Index: DFR-19194
Gravity - CO2 carbon dioxide sensor - SCD41 - IR - I2C - 400-5000 ppm - DFRobot SEN0536
CO2 carbon dioxide sensor from DFRobot equipped with the SCD41 system from Sensirion . It is based on the photoacoustic NDIR detection principle and Sensirion's patented...
Index: DFR-22673
Index: DFR-22673
AS7265x - spectrophotometer (Qwiic) - SparkFun SEN-15050
Inspection sensor also known as a spectrophotometer. The module contains three spectral sensors AS7265x with LED, UV and IR diodes. The board has such sensors as AS72651,...
Index: SPF-13627
Index: SPF-13627
Grove - 2-channels relay with optoisolation - 10A/250VAC - coil 5V + clear case
The module has two SRD-05 relays with the coil powered with the voltage of 5 V with optical insulation of input and mounting holes. The system allows you to control...
Index: SEE-12626
Index: SEE-12626
Flame sensor - 760-1100nm - Iduino SE060
The sensor used to detect fire. It is powered with the voltage from 3.3 V to 5 V. The range of the detected wave is from 760 nm to 1100 nm, detection angle is 60 °. The...
Index: OST-14255
Index: OST-14255
Grove - 3 Axis Analog Accelerometer ADXL335
The Grove series module equipped with the ADXL335 is a small, thin 3-axis accelerometer with signal voltage outputs. It measures acceleration with a minimum full scale range of...
Index: SEE-14738
Index: SEE-14738
PIR motion detector MCE32 220-240V
The PIR sensor detects movement. It is used to automatically control lighting or other devices. The sensor works on infrared. It is activated by the movement of a heat emitting...
Index: MOD-05185
Index: MOD-05185
- Reduced price
- SPECIAL OFFERS
Rubber conductive rubber cable for measuring the tensile force - Adafruit 519
Conductive rubber wire with a diameter of 2 mm and a length of 1 meter. It is used to measure the stretching strength. During the stretching of the element, its resistance...
Index: ADA-06549
Index: ADA-06549