DFRobot Gravity - analog sensor of TDS, purity of water for Arduino
Index: DFR-10830
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
ROBOTS AND MECHANICS - Strona 25
Loading...
Feetech FT-MC-001-KIT 2WD - Aluminium 2 Wheel Robot Chassis + FM90 Servos
Platform of a 3-wheeled mini-robot that provides two DC motors in a from of servos with permanent operation. Robot for self-assembly.
Index: FTC-09213
Index: FTC-09213
Extension cord for servos 90 cm - twisted
Extension cable with the length of 90 cm ended with the standard plug for the servos. It has twisted cables.
Index: KAB-08863
Index: KAB-08863
Linear Actuator LA10 500N 13mm/s 12V - stroke 15cm
This 12V linear actuator has a maximum stroke of 15 cm . Its maximum load capacity is 50 kg (500 N) . The actuator has a robust metal housing that provides protection...
Index: WLS-17096
Index: WLS-17096
Romi - Magnetic Encoders set for Romi Chassis - 2 pieces - Pololu 3542
A pair of magnetic quadrature sensors, designed for mounting on Romi Chassis. Consists of a plate with the Hall sensor and the plastic rotor with magnets, a set of makes up...
Index: PLL-07350
Index: PLL-07350
Stepper Motor 42HM34-1334 400 steps 2,8V / 1,33A / 0,21Nm
Bipolar stepper motor, four wire. It has a resolution of 400 steps per revolution (0.9 degrees) . It is powered by 2.8 V and draws 1330 mA per coil. The torque is 2.2 kg*cm...
Index: AKS-11612
Index: AKS-11612
Micro Metal DC Geared Motor with Lead Screw (6V 150RPM M4*55)
Small metal motor supplied with 6 volts and 55 mm long M4 threaded output shaft. The idling speed is approx. 150 rpm. Its dimensions are: 25 x 12 mm .
Index: DFR-06703
Index: DFR-06703
Micro motor N20-BT04 30:1 1000RPM - 12V
N20 series miniature motor with 30:1 gearing, has 1000 RPM , torque is 0.6 kg*cm (0.059 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12544
Index: DNG-12544
Mini Vibration Motor MT63 1,5 V
Small metal vibrating motor powered by 1.5 V. Idle current 180 mA. Dimensions: 17 x 10 x 12 mm.
Index: MOT-04725
Index: MOT-04725
Aluminum servo mount in size 58 x 37 x 25 mm and weighing 15 g. Suitable for servo MG995.
Index: GRL-10912
Index: GRL-10912
Feetech FT-DC-002-KIT - Aluminium 2WD Robot Chassis
Platform of a 2-wheeled mini-robot with two DC motors and wheels with 60 mm diameter. Kit for self-assembly.
Index: FTC-09217
Index: FTC-09217
Aluminium Motor Mount 25D - 2pcs. - Pololu 2676
Aluminum, lightweight (8.5 g) mountings for Pololu engines, type 25D. Mountings have the mounting holes for M3 screws. The price includes set of 2 pieces.
Index: PLL-03161
Index: PLL-03161
Stepper motor JK42HS40-1704 200 steps 2.8V/1.7A/0.4Nm
Bipolar stepper motor, four wire. It has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 2.8 V and draws 1700 mA per coil. The torque is 4.0 kg*cm (0.4...
Index: MOT-06429
Index: MOT-06429
Small metal motor powered from 3 V to 6 V. Idle current 400 mA. Dimensions: 37,8 x 27,7 mm.
Index: MOT-04718
Index: MOT-04718
Servo PowerHD HD-6001HB - standard
Standard servo with ball bearings. Supply voltage: 4,8 V - 6,0 V. Speed: 0.14 sec /60 °. Point: 6.7 kg (6 Volts). Dimensions: 40,7 x 20,5 x 39,5 mm. Weight: 43 gr.
Index: MOT-02311
Index: MOT-02311
Round aluminum servo horn Feetech FK-RP-001 - 20mm / 6mm
Aluminium servo horn made by company Feetech, diameter of 2 cm and a diameter of the mounting hole is 6 mm. It is in a circular shape. It works with standard servos. The...
Index: FTC-09198
Index: FTC-09198
Aluminium Motor Mount 37D - 2pcs. - Pololu 1084
Aluminum light mountings for the Pololu engines, type 37D.
Index: PLL-02343
Index: PLL-02343
37Dx52L Motor with 19:1 Gear 12V 530RPM - Pololu 4741
Polol's 19:1 gear motor. Its speed is 530 rpm and its torque is 8.5 kg*cm. The motor is powered by 12 V and has a current consumption of about 200 mA without load and...
Index: PLL-16394
Index: PLL-16394
Servo Feetech FS5103B - standard
Standard servo. The power voltage from 4.8 V to 6 V. Speed: 0.16 s/60°. Torque: 3.2 kg*cm Dimensions: 40.8 x to 20.1 x 38.0 mm Weight: 36 g
Index: FTC-09161
Index: FTC-09161
Small metal vibrating motor powered by 3 V. Idle current 90 mA. Dimensions: 9 x 5.2 x 5.2 mm.
Index: MOT-04727
Index: MOT-04727
Small metal motor powered by 3.7 V. Idle current 60 mA. Dimensions: 8 x 4 mm. The output is a wire with the insulation removed.
Index: MOT-08497
Index: MOT-08497
Stepper Motor JK57HS56-2804 200 steps/rot 2,4V/2,8A/1,26Nm
A bipolar stepper motor, four wired. Has a resolution of 200 steps per revolution (1.8 degree). It is supplied with the voltage of 2.4 V, consumes 2800 mA on the coil. Torque:...
Index: MOT-03650
Index: MOT-03650
Nylon Distance Bolts 15mm with M3 Thread - 10pcs.
Distance made of plastic, with a length of 15 mm and M3 thread. Price is for 10 pieces. Elements of this type allow to keep a constant distance between the mounted boards.
Index: AKS-11161
Index: AKS-11161
Digital standard servo with aluminum gears and ball bearings. Supply voltage from 6.0 V to 7.4 V.
Speed: 0,11 sec./60°.
Torque: 3 0,0 kg*cm .
Dimensions:...
Index: MOT-08400
Index: MOT-08400
Linear Actuator LAD 500N 15mm/s 12V - 15cm stroke
Powerful electric actuator with IP65 protection class and maximum extension of 15cm . Adapted for 12V power supply. The device can lift up to 50 kg (500 N). It works at 15...
Index: ELB-15471
Index: ELB-15471