Description: Filament Fiberlogy Easy PLA 1,75 mm 0,85 kg - White
The Fiberlogy cartridge for white3Dprinters is sent as a wire wound on reels of 200 mm diameter. The whole is safely vacuum-packed with the addition of a moisture absorber. ThePLAfilter is designed for all devices that do not have protection against the use of cartridges from another company and for open source devices. Suggested printout parameters using the described filter are: head temperature 230°C and table temperature from 50°C to 70°C. The diameter of the filter is1.75 mmand the net weight is0.85 kg. TheEasy PLAfiltercan be used e.g. for printing various types of prototypes, toys, single parts of toys, jewellery, decorations, etc.
In our offer of filaments you will also find other materials and colors.
Filament Fiberlogy Easy PLA 1,75 mm 0,85 kg - White.
Features of thePLApillar
The PLA filament is produced from renewable raw materials and is therefore biodegradable. It is distinguished by low material shrinkage and increased resistanceto UV rays.Due to its minimal water absorption, it is used for food packaging, surgical threads and even implants. The described filament has a poorly perceptible smell. It is not flammable, which significantly increases work safety. PLA is a fullywaterproofmaterial with high warpage resistance and durability. Due to its properties and ease of use, PLA is intended, among others, for beginner users of 3D printers.
Suggested print parameters for filament
| Printing temperature | From 230°C |
| Table temperature | From 50°C to 70°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Technical specifications and physical properties of the pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | White |
| Printing temperature | From 230°C |
| Table temperature | From 50°C to 70°C |
| Spool - material | Easy PLA |
| Reel diameter | 200 mm |
| Reel width | 80 mm |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Packaging dimensions | 205 x 205 x 90 mm |
| Net weight | 0.85 kg |
Example prints from the Easy PLA pillar
Sample prints.
Useful links |
