Over 500,000 customers already trust us. With us you get:
same-day shipping for products marked “24h shipping”
our own service centre in Poland
30 days to return and free delivery in Poland from PLN 500
4.9/5 on TrustMate and 4.9/5 on Google (almost 4,000 reviews)
VAT invoice, leasing and instalments for businesses
For businesses
individual quote for larger quantities
VAT invoice
For schools and universities
orders based on requests for quotation
help with choosing kits for your lab
Send an inquiry - we reply quickly.
Step-Up Voltage Regulator U3V7015 - adjustable- 4,5-20V 10A - Pololu 2890
Upgrade inverter with adjustable output voltage from 4.5 V to 20 V. The permissible input voltage range is 2.9 V to 20 V, and the maximum input current that the system can process is 10 A.
We could not load the price.
The promotional price does not combine with quantity discounts.
Product description: step-up inverter U3V70A - adjustable - from 4.5 V to 20 V 10 A.
A controller that increases the input voltage from 2.9 V to 20 V to an output value selected by a potentiometer from 4.5 V to 20 V, assuming that the output voltage cannot be lower than the input voltage. The system is able to process a maximum input current of 10 A, a typical input current brings 8 A for a few seconds, after which the thermal protection mode is activated. It is recommended to use up to 6 A, the inverter can then run for many minutes. The output current is a function of the input voltage, output voltage and inverter efficiency. Details can be found in the diagrams below.
The U3V70x family offers one version of the inverter with adjustable output voltage:U3V70A (4.5 - 20 V). Constant voltage versions are also available:5 V,6 V,7.5 V,9 V,12 Vand15 V. All versions of the U3V70x are similar to each other, for ease of identification there is a blank space on the back where you can place your ownmarker.
Botland is an official distributor of Pololu electronics and robotics parts. Countless robots hold at least one component of this brand in their build. Our team guarantees that all Pololu products presented here are original.
Connecting the U3V70A inverter
The module has four outputs:
- VIN- input voltage, must not exceed the output voltage.
- GND- ground potential.
- VOUT- output voltage. In case of adjustable version it is selected by means of a potentiometer.
- ENABLE- switches the system into low power consumption state. By default, the pin is pulled up to the VIN supply voltage via a 100 kΩ resistor. This means that if the output is left unconnected, the inverter is switched on by default. In order to put the circuit into standby mode, the low state (below 0.4 V) must be given. In this situation, the module only consumes current flowing through the 100 kΩ resistor, which is 10 µA depending on the input voltage being connected.
The connectors are properly signed on the board. The output roaster is 5 mm for ARK connectors and 2.54 mm for connectorsgoldpinwhich allow the module to be mounted incontact plateorconnectionby means ofcables.
Soldering connectors for self-soldering are included. You can choose popular goldpins or ARK high-current terminals. Thanks to the thicker PCB layer the terminals do not stick out of the circuit.
Fig.: Output voltage selection.
Output voltage selection for model U3V70A
The voltage is set using a 12-turn potentiometer. A multimeter can be used to select the appropriate value. Turning the potentiometer to the right increases the output voltage.
Output current and efficiency of step-up system U3V70A
The efficiency of the inverter depends on the input voltage and the selected output voltage. On average, it ranges from 80 % to 95 %. The output current is a function of the input voltage, output voltage and inverter efficiency. It is usually the value around the input current.
Specifications of the U3V70A step-up converter
- Input voltage: 2.9 V to 20 V
- Output voltage: 4.5 V to 20 V - adjustable by potentiometer
- Maximum input current:
- up to 10 A - instantaneous
- to 8 A - for a few seconds
- up to 7 A - for an extended period
- Output current: see graphs
- Low power consumption at rest
- Efficiency of 80 - 95 %
- Security:
- Before reverse power connection
- Thermal - switches off the system at too high a temperature
- Switch-on interlock at too low a supply voltage - below 2.5 V
- Short circuit
- Input current limitation to 10 A
- Two mounting holes for M2 screws
- Dimensions: 40.6 x 15.2 x 4.6 mm
- Weight (without connectors): 3,4 g
A controller that increases theinputvoltagefrom2.9 V to 20 Vto an output value selected by a potentiometerfrom 4.5 V to 20 V, assuming that theoutput voltage cannot be lower than the input voltage.The system is able to process a maximum input current of10 A, a typical input current brings8 A for a few seconds, after which thethermal protectionmode is activated. It is recommended to useup to 6 A, the inverter can then runfor many minutes. The output current is a function of the input voltage, output voltage and inverter efficiency. Details can be found in the diagrams below.
Useful links
| Name | Value |
|---|---|
| Length | 41 mm |
| Width | 15 mm |
| Height | 5 mm |
| Voltage to | 2.9 V |
| Voltage from | 20.0 V |
| Voltage output from | 4.5 V |
| Output voltage to | 20 V |
| Current | 3.5 V |
| Stabilizer - Type2 | switching |
| Stabilizer - Type | step-up |
| Width | 8.3 cm |
| Height | 0.9 cm |
| Depth | 11.7 cm |
| Weight | 0.009 kg |
GLS
Shipping in 24 hours
from €8.07
Raben - pallet delivery
Delivery in 3–5 days, no inside delivery
from €96.75
The full delivery terms are on the page Delivery and payment.
30 days to return, without giving a reason
If the product does not meet your expectations, you have 30 days from receiving the parcel to withdraw from the contract. The product only has to be complete. The right of return belongs to consumers (a purchase unrelated to business activity).
Complaints
If the product turns out to be faulty, you can make a claim under the guarantee or the statutory warranty. We handle claims without delay, at the latest within 14 working days of receiving the report together with the goods.
Be the first to ask a question about this product!
Instructions and documents
GPSR data
Product information
This product is a component intended for further assembly or prototyping. It is not a finished product within the meaning of the product safety regulations.
Products from the same category
See all
