Pakiet filamentów Devil Design - czarno-biały PLA + PETG - 10szt.
Index: DEV-27744
- New
- Reduced price
- Pack
- Sale
- New
- New
- Reduced price
- Sale
- Sale
- Sale
ELECTRONICS - Strona 78
Loading...
Gravity - Air Quality Sensor - SGP40 - DFRobot SEN0394
Air quality sensor manufactured by DFRobot. It has a built-in SGP40 chip (introduced by the well-known Sensirion company), which measures the VOC air quality in the range...
Index: DFR-19375
Index: DFR-19375
6-Pin Female-Female JST SH-Style Cable 25cm - Pololu 4767
JST SH 6-pin female to female cable made by Pololu company. It is 16 cm long, its conductor diameter is 28 AWG and the pin raster is 1 mm . This type of cables are used in...
Index: PLL-19489
Index: PLL-19489
Mounting element in the form of a female socket with 30 pins in a 2 x 15 pin arrangement. The components are compatible with the BUS socket on the M5Stack Core development...
Index: MSS-19590
Index: MSS-19590
LSM6DSO - 3-axis accelerometer and I2C/SPI gyroscope - SparkFun SEN-18020
PCB with 6DoF LSM6DSO chip containing accelerometer and gyroscope along with 9 kB FIFO buffer and embedded processing interrupt functions. The device can detect shock, roll,...
Index: SPF-19708
Index: SPF-19708
JustPi THT CF carbon resistor 1/4W 0Ω - 30pcs.
The set consists of 30 resistors. The electronic elements are designed for THT through-hole mounting. Resistance is 0 Ω and tolerance is 5%.
Index: JUS-20005
Index: JUS-20005
SIM868 GSM/GPRS/GNSS + Bluetooth - communication module for Raspberry Pi Pico - Waveshare 20268
CAN FD Expansion HAT is a CAN bus expansion overlay produced by Waveshare. It supports the original CAN 2.0 protocol and the CAN FD expansion with higher data throughput....
Index: WSR-20081
Index: WSR-20081
PCIe to M.2 adapter - compatible with Raspberry Pi CM4 - Waveshare 19091
An adapter created by Waveshare that allows you to connect high-speed NVMe SSDs using the M.2 bus to the PCIe bus. The module is also compatible with Raspberry Pi Compute...
Index: WSR-20091
Index: WSR-20091
Grove - OLED 0,66'' (SSD1306) 64x48px I2C - Seeedstudio 104020248
Monochrome OLED display produced by Seeedstudio. The screen is based on SSD1306 chip, its diagonal is 0.66" and the resolution is 64 x 48 px . The module is equipped with...
Index: SEE-20410
Index: SEE-20410
Gravity - Digital Wireless Switch Kit - 433MHz - DFRobot TEL0140-1
Digital Wireless Switch Kit is a set consisting of two radio modules - receiver and transmitter , which operate at 433 MHz . It is powered with a voltage range from 3.3 V...
Index: DFR-20431
Index: DFR-20431
Ethernet communication module with PoE port - ESP32 - Expansion Unit for M5Stack development modules
Unit extension in the form of an Ethernet communication module with PoE port (Power Over Ethernet) - designed for M5Stack development modules. It has a built-in...
Index: MSS-21274
Index: MSS-21274
Joystick V1.1 MEGA8A - expansion Unit for M5Stack development modules
Joystick V1.1 MEGA8A in the form of a Unit extension for use with M5Stack development modules. The controller has the form of an analog knob similar to those used, among...
Index: MSS-21398
Index: MSS-21398
- Reduced price
- SPECIAL OFFERS
Servo 2040 - 18 Channel Servo Controller - Pimoroni PIM613
Servo 2040 is a servo driver manufactured by PiMoroni. It has 18-channels that allow you to control up to 18 servos simultaneously . What's more, it also supports...
Index: PIM-21462
Index: PIM-21462
Converter USB-UART CH343 - USB type C plug - Waveshare 21443
The module is based on the CH343 chip . It allows communication between USB and UART interfaces. It is used for data exchange between a computer and a microcontroller. It...
Index: WSR-21712
Index: WSR-21712
GNSS MAX-M10S module - Qwiic - SparkFun GPS-18037
SparkFun GNSS Receiver Breakout is a high-quality GNSS receiver with a built-in MAX-M10S chip and an SMA antenna connector. It enables simultaneous reception and processing...
Index: SPF-22065
Index: SPF-22065
PCF8575 - GPIO pin expander - I2C - STEMMA QT / Qwiic - Adafruit 5611
Adafruit pin expander equipped with PCF8575 chip. It has as many as 16 pins of GPIO inputs / outputs , thanks to which it increases the design possibilities of the modules...
Index: ADA-22192
Index: ADA-22192
MOSFET driver with N channel - for motors, solenoids, LEDs - STEMMA JST PH 2mm - Adafruit 5648
N-channel MOSFET (also called transistor) driver from Adafruit, featuring the AO3406 chip. The module can be supplied with a voltage from 3 V to 30 V and controlled by a...
Index: ADA-22539
Index: ADA-22539
Multi-GNSS module - L76K - GPS, BeiDou (BDS), GLONASS, QZSS - Waveshare 23721
The L76K GPS module manufactured by Waveshare is a Multi-GNSS module, supports GPS , BeiDou (BDS), GLONASS and QZSS systems and enables precise positioning in...
Index: WSR-22732
Index: WSR-22732
Resistive touch display LCD 3.2'' 320x240px - 262K - Waveshare 16498
Multi-color, graphic TFT LCD display from Waveshare, with a diagonal of 3.2 " and a resolution of 320 x 240 px . The screen has a resistive touch panel with the XPT2046...
Index: WSR-22735
Index: WSR-22735
SenseCAP Indicator D1Pro is an advanced IoT platform with a 4-inch touch screen with a resolution of 480 x 480 px . It works on the basis of two microcontrollers: ESP32S3...
Index: SEE-23262
Index: SEE-23262
Active dual-frequency GPS/GNSS L1+L5 antenna with SMA connector - Waveshare 25346
The Waveshare active dual-band antenna is an advanced GNSS antenna supporting the L1 and L5 bands. It supports many satellite navigation systems such as BD, GPS, Galileo,...
Index: WSR-23872
Index: WSR-23872
Gravity: GP8101S 1-Channel PWM to 0-5V/10V DAC Module
The GP8101S is a 1-channel digital-to-analog converter (DAC) communicating via a PWM signal. The module offers voltage outputs from 0 V to 5 V or 10 V , making it ideal for...
Index: DFR-24116
Index: DFR-24116
Hanging installation rack - 10'' 6U 280x310mm - black - Lanberg WF10-2306-10B
A compact hanging cabinet by Lanberg is an ideal solution for building networks, installing cabling and ICT devices compliant with the 10" standard with a maximum total load...
Index: IMP-24332
Index: IMP-24332
Atomic TF-Card Reader - micro SD card reader - expansion module for M5Atom - M5Stack A135
Atomic TF-Card Reader is a module designed to read and write TF (microSD) cards . It is compatible with Atom series controllers : Atom Matrix, Atom Lite, AtomS3 and AtomS3...
Index: MSS-24375
Index: MSS-24375
Proto Kit - CapsuleProto prototype board for M5Capsule - 62 holes - 5pcs. - M5Stack A141
The Proto Kit is a set of five perforated prototype boards specifically designed for the M5Capsule . The 26 x 24 mm board provides adequate space for soldering, placing...
Index: MSS-24376
Index: MSS-24376