Linear Actuator Super Power Jack 2000N 7,5mm/s 12V - 30cm stroke
Index: MOT-05364
- Reduced price
- Sale
- Reduced price
- Sale
Analog time programmer TS-WF1 - with Schuko socket - Kemot URZ2001-5
Index: LEC-24140
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 59
Loading...
Index: LED-01456
Set of CF THT 1W resistors - 100pcs.
Set of 10 values of 10 through-hole resistors, rated at 1 W. To make it easier to find the correct value, each is located in an appropriately marked compartment of the organizer.
Index: PAS-01959
Index: PAS-01959
Real-time clock that allows to read time in hours, minutes, and seconds, date: month, day, year. The communication interface is I2C bus, THT case DIP8.
Index: UCC-02764
Index: UCC-02764
Limit switch with curved lever - WK330 - 5pcs.
Limit switch with curved lever. The maximum operating parameters are 125V and 1 A.
Index: PAS-02841
Index: PAS-02841
RFID / NFC MiFare Classic sticker - 13,56MHz - Adafruit 362
The ID of the RFID /NFC identifier in the form of a sticker, is equipped with NXP S50 chip. Each chip has a unique 32-bit code. The devices work at a small distance from the...
Index: ADA-02951
Index: ADA-02951
Step-Down Voltage Regulator D24V5F12 - 12V 0,5A - Pololu 2846
A step-down pulse inverter module with an efficiency of 80 % - 93 %. Converts the input voltage from 12.1 V to 36 V to an output value of 12.0 V. The maximum continuous current...
Index: PLL-03113
Index: PLL-03113
Electric cube 12pin 6mm 5A/250V
The 12-pin electric cube allows you to connect the wires with a voltage of 250 V with the flow of current up to 5 A. Connection pitch is 8.5 mm, the maximum diameter of the...
Index: KAB-03718
Index: KAB-03718
Two-color graphical OLED display 0.96 '' (A) 128x64px SPI/I2C - angled connectors - Waveshare 9085
0.96" OLED display with 128 x 64 px resolution and yellow and blue. The screen based on the SSD1306 controller works with voltages of 3.3 V and 5 V, communicates via SPI or...
Index: WSR-04434
Index: WSR-04434
Grove - 10kΩ linear sliding potentiometer
Sliding linear potentiometer with a resistance of 10 ohms. Itas a 4-pin Grove connector. The kit includes a cable adapted to Seeedstudio Base Shield v2.0.
Index: SEE-04436
Index: SEE-04436
Temperature and humidity sensor DHT22 (AM2302) module + cables - Waveshare 11092
Module with temperature and humidity sensor with a digital interface, single-wired. Measuring range: temperature from -40 °C to +80 °C, humidity from 0% to 100 % RH.
Index: WSR-04920
Index: WSR-04920
Camera HD I OV5647 5Mpx - wide-angle "fish-eye" for Raspberry Pi - Waveshare 11388
Camera module with 170 ° viewing angle connected to the special connector for minicomputer Raspberry Pi in version 3, 2, B+, A+ and older A and B. The device has a matrix CCD...
Index: WSR-05621
Index: WSR-05621
Potentiometer knob RCL14 red - 6/14mm - 5 pcs.
Knob for rotation potentiometer on axis of 6 mm. The height is 20 mm and the outer diameter is 14 mm. 5 pcs.
Index: MOD-05734
Index: MOD-05734
Potentiometer knob GS18 gray-blue - 6/18mm - 5 pcs.
Knob for rotation potentiometer on axis of 6 mm. The height is 12.5 mm and an external diameter is 18 mm. The product is sold in sets of 5.
Index: MOD-05739
Index: MOD-05739
RGB LED Strip WS2812B - digital, addressed - IP65 144 LED/m, 43W/m, 5V - 1m
Individually addressable RGB LEDs, which are located in 1-meter strap with a density of 144 LEDs per meter. Each pixel may emit a color from 24-bit palette. One microcontroller...
Index: LED-05814
Index: LED-05814
SMA male connector with 50 Ω impedance crimped on the wire. Used to connect antennas and receivers.
Index: KAB-06315
Index: KAB-06315
Electric cube 12pin 8mm 10A/250V
The 12-pin electric cube allows you to connect the wires with a voltage of 250 V with the flow of current up to 10 A. Connection pitch is 10 mm, the maximum diameter of the...
Index: KAB-06895
Index: KAB-06895
DFRobot Gravity - Non-contact IR Thermometer Sensor MLX90614
Non-contact temperature sensor. It is used for measurement of IR radiation and does not require the direct touch. It communicates through an I2C interface.
Index: DFR-06933
Index: DFR-06933
Adapter microUSB - DC 5,5/2,1mm angled
The corner adapter enabling the cable connection to the tip 5,5 / 2,1 mm with slot of type of microUSB. It can be used as an adapter to power Arduino and Raspberry Pi.
Index: KAB-07033
Index: KAB-07033
The slip ring has 6 wires with a diameter of 0.8 mm. It is designed to transfer power and signals from the stationary element to a rotating element. The case diameter is 44 mm...
Index: MOD-07143
Index: MOD-07143
Logic system CD4081BE - 4xAND - 2pcs
Logic system 4 x gate And with a working voltage from 3 V to 18 V, in the DIP 14 case. Items are sold in sets of 2 pieces.
Index: UCC-07282
Index: UCC-07282
Humidity Sensor SYH-2R - no case
Analog air humidity sensor changes the resistance depending on the humidity level. It operates in the range from 10 % to 95 % RH. The module has no case.
Index: MOD-08089
Index: MOD-08089
DFRobot - Flexible Vibration Sensor with piezo foil
Analog-to-digital vibration sensor with elastic plastic piezoelectric sensor. It is powered with the voltage of 5 V, it works with Arduino modules.
Index: DFR-08366
Index: DFR-08366
Switch ON-OFF KN3(C)-201 250V/6A
A printable lever switch equipped with 4 contacts, rated 6 A / 250 V or 10 A / 125 V. It enables switching on two devices simultaneously. Leads raster is 25 mm, total height...
Index: UCC-08393
Index: UCC-08393
Socket 1x3pin - 2,54mm - long - 10pcs.
3-pin connector, easy to solder onto the PCB. It is used, for example, for connecting the male wires. Pitch is equal to 2.54 mm. It features long pins with a length of 10.5 mm.
Index: UCC-08507
Index: UCC-08507