- New
- Kit
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Sale
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 80
Loading...
NTC 110 100kΩ thermistor with 1m wire
Thermistor of NTC 110 type with a resistance of 100 kΩ. The connecting cable has a length of 1 meter.
Index: SES-04941
Index: SES-04941
LIS3DH 3-axis I2C/SPI digital accelerometer - STEMMA QT - Adafruit 2809
Sensor for measuring acceleration in three axes in the range: ± 2g, ±4 g, ±8 g / ±16 g. Powered with the voltage from 3 V to 5 V. It communicates over the I2C or SPI bus.
Index: ADA-05295
Index: ADA-05295
Raychem RUEF500 polymer fuse 30V/5A 10.2mm raster - 10pcs
Polymer fuse operating with the voltage of up to 30 V, which allows for the flow of the current of up to 5.0 A. The price is for 10 pieces.
Index: KAB-05479
Index: KAB-05479
DFRobot LED Keypad Shield - Shield for Arduino
Shield for Arduino with 4-digit ,8-segment display with common cathode. In addition, the board has 5 buttons. The device operates with 5 V voltage.
Index: DFR-05516
Index: DFR-05516
LPG, natural gas and carbon gas sensor MQ-5 module - semiconductor - Waveshare 9531
Module with sensor MQ-5 detecting LPG, natural gas and coal gas . It is powered with the voltage from 2.5 V to 5 V. It has digital and analog output, making it compatible with...
Index: WSR-05522
Index: WSR-05522
Fingerprint reader - with STM32F205 32-bit - Waveshare 8552
Module with fingerprint reader communicating through serial interface UART (RX, TX). It has a memory where you can store up to 1000 fingerprints of different people and export...
Index: WSR-05622
Index: WSR-05622
Plastic case Kradex Z3 - 110x150x70mm black
Four-part, universal housing designed for storing electronic circuits. The product was made of polystyrene. For mounting the housing, use the mounting screws included in the...
Index: KDX-05747
Index: KDX-05747
Eight-segment display x1 - 14mm blue - common anode
Single 8-segment display digits with point and some characters.
Index: LCD-06439
Index: LCD-06439
DFRobot Gravity: Non-contact Liquid Level Sensor
The sensor determines the liquid level without dipping into the liquid. Due to the lack of contact with the liquid, the module is suitable for level measurement of hazardous...
Index: DFR-06931
Index: DFR-06931
Cable HDMI 2.0 - 1m - official for Raspberry Pi - white
HDMI cable officially licensed by the Foundation Raspberry Pi that lets you connect the minicomputer with the monitor. Supports Full HD and 4K, its length is 1 m.
Index: KAB-07041
Index: KAB-07041
DFRobot - 12V Solenoid Valve 1/2"
The enables the control of the liquid flow using a computer or microcontroller. The valve is supplied with the voltage of 12 V. It is closed to connect the power supply of 12...
Index: DFR-07423
Index: DFR-07423
DRV8833 DC/Stepper Motor Driver Breakout Board - Adafruit 3297
Dual channel DC motor controller. Continuous current per channel 1.2 A (momentary up to 2 A). Supply voltage ranges from 2.7 V to 10.8 V.
Index: ADA-07665
Index: ADA-07665
Toroidal transformer Indel TST20/006 20W 230V/2x14V
Indel toroidal transformer. Primary voltage is 230 V, secondary voltage is 2 x 14 V. Power is 20 VA.
Index: MOD-07878
Index: MOD-07878
The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: MOD-08072
Index: MOD-08072
10-segment LED Bar Display OSX10201-RGB1
10-segment LED display, the range of colors is 4 x red, 3 x green, 3 x blue. It can be used for example as a temperature gauge or liquid level.
Index: LED-08171
Index: LED-08171
The angular plug is for mounting on the cable. It has the ground.
Index: KAB-08175
Index: KAB-08175
TTP224 4-way Capacitive Touch Switch Module
Capacitive touch sensor based on the TTP224 module. It is powered by a voltage from 2.4 V to 5.5 V, the output is a digital signal. It has 4 buttons with LED signaling.
Index: MOD-08235
Index: MOD-08235
MQ-135 alcohol, benzine, ammonia sensor - semiconductor
Module with sensor MQ-135 detecting benzene, alcohol and smoke . It is powered with the voltage from 2.5 V to 5 V. It has digital and analog output, making it compatible with...
Index: MOD-08243
Index: MOD-08243
Tinycontrol-111 - LAN controller LK3.9 HW - digital I/O / 1-wire / I2C
A device that acts as a WWW server. It allows for reading sensors and remote control of 6 outputs. This version has many improvements over the V2 version, e.g. signal...
Index: TNC-08287
Index: TNC-08287
DFRobot Gravity - analog signal isolator
The module prevents the operation interference of the sensors through the insulation of the analog signal and providing an isolated power for sensors. It is supplied with the...
Index: DFR-09529
Index: DFR-09529
Power supply S-36-12 - for LED strips - 12V / 3A / 36W
Stable, switched-mode industrial power supply for powering LED strips. Voltage: from 100 V to 240 V. Output voltage: 12 VDC. Output current: 3 A. Equipped with a terminal...
Index: ZAS-09645
Index: ZAS-09645
Arcade Concave Button 3,5cm - red - SparkFun COM-09336
Concave button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.
Index: SPF-10078
Index: SPF-10078
Arcade Concave Button 3,5cm - green - SparkFun COM-09341
Concave button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.
Index: SPF-10083
Index: SPF-10083
SanDisk Ultra Fit - memeory USB 3.1 Pendrive 64GB
USB 3.0 Ultra Flair memory from SanDisk with capacity of 64 GB. It is equipped with a small case. The device has a 5 years warranty.
Index: BAL-10584
Index: BAL-10584