Electric motors, to connect them with the control system β for example, the programmable control unit PLC or industrial PC jednopΕytkowym such as the Raspberry Pi require a motor driver. The modules are available in our store a wide variety of settings, in versions with two or even szesnastoma control channels. Some two-channel motor driver DC, can also be used, e.g. for control of stepper motors, although this requires the implementation of control algorithm in the module monitor the operation of the driver.
- New
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Motor drivers modules
Loading...
Cytron MD20A - single-channel motor controller 30V/20A
Single-channel DC motor controller based on MOSFET transistors. Enables control of motor speed through PWM channel. Continuous current per channel is 20 A (momentary 60 A)....
Index: CTN-14000
Index: CTN-14000
Cytron MD10-POT - DC motors controller 30V / 10A + switch + potentiometer
Single channel DC motor controller allowing motor control by switch and potentiometer without the need for microcontroller and programming. Continuous current per channel 10 A...
Index: CTN-13450
Index: CTN-13450
Cytron MD13S - single-channel 30V / 13A motor controller
Single channel DC motor controller. Continuous current per channel 13 A (momentary 30 A ). Supply voltage from 5 V to 30 V. There is a Grove connector on the board.
Index: CTN-12412
Index: CTN-12412
Cytron MDD3A - dual-channel 16V / 3A motor controller
The Cytron MDD3A motor controller has the ability to control 2 DC motors or 1 stepper motor. Continuous current per channel is 3 A (momentary 5 A). Supply voltage is from 4 V...
Index: CTN-15819
Index: CTN-15819
Cytron MD10C - single-channel 30V / 13A motor controller
Single channel DC motor controller. Continuous current per channel 13 A (momentary 30 A). Supply voltage from 5 V to 30 V .
Index: CTN-12397
Index: CTN-12397
Motor regulator DC 12-40V/10A/400W - with a speed control knob
A simple controller with an integrated rotary potentiometer to control the speed of a DC motor up to 400 W. Powered from 12 V to 40 V.
Index: MOD-06666
Index: MOD-06666
Cytron MDD20A - two-channel motor driver 30V/20A
Two-channel DC motor controller. Supply voltage ranges from 6 V to 30 V, maximum current per channel is 20 A at continuous operation and 60 A of instantaneous current . The...
Index: CTN-18881
Index: CTN-18881
DFRobot - motor driver 5,5V/1,5A for BBC micro:bit
An overlay for micro:bit to control four DC motors , two stepper motors and eight servos (5.5V/1.5A). Additionally the module has 9 I/O pins Micro:bit.
Index: DFR-12359
Index: DFR-12359
Simple DC 28V/3A motor driver - module with knob
Extremely easy to use, single-channel direct current motor controller with speed control knob. The device works on the basis of PWM signal. Power supply voltage is from 8 V to...
Index: MOD-06906
Index: MOD-06906
Cytron SmartDriveDuo MDDS30 - two-channel DC motor driver - 7V-35V/30A
Two-channel DC motor controller by Cytron equipped with SmartDrive function supporting 4 different communication interfaces. The controller works with motors supplied with...
Index: CTN-14814
Index: CTN-14814
Cytron MDD10A - dual-channel 30V / 10A motor controller
Two-channel DC motor controller. Continuous current per channel is 10 A (momentary 30 A) . Supply voltage is 5 V to 30 V . The controller works with logical voltage 3.3 V...
Index: CTN-15818
Index: CTN-15818
Cytron Maker Drive MX1508 - two-channel motor controller 9.5V/1A
Simple to use, two-channel DC motor driver with H-bridge. 1 A continuous current per channel (1.5 A momentary). Power supply from 2.5 V to 9.5 V. Output current at 5 V is 0.2 A.
Index: CTN-13999
Index: CTN-13999
Cytron MD25HV - single-channel DC motor driver - 7V-58V / 25A
A set with a single-channel DC motor controller by Cytron, equipped with a rocker switch for changing the direction of rotation and a potentiometer for speed control. The...
Index: CTN-14813
Index: CTN-14813
Simply Robotics Motor Driver Board - motor driver - for Raspberry Pi Pico - Kitronik 5348
It imposes on the Raspberry Pi Pico extending the functionality of the module with the ability to control servos and motors. It allows you to simultaneously control 8 servos...
Index: KTR-22858
Index: KTR-22858
DRV8838 - single-channel motor controller 11V/1,7A - Pololu 2990
Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 1.8 A). Supply voltage up to 11 V.
Index: PLL-02695
Index: PLL-02695
DRV8876 QFN - Single channel 37V/1.1A motor driver - Pololu 4037
DC motor driver manufactured by Pololu. Single-channel , equipped with the DRV8876 QFN system, it is supplied with the voltage from 4.5 V to 37 V. The continuous current...
Index: PLL-21361
Index: PLL-21361
DRV8871 Brushed DC Motor Driver Breakout 45V/3,6A - Adafruit 3190
Single-channel DC motor controller . Continuous current per channel 2 A (momentary to 3.6 A). Supply voltage from 6.5 V to 45 V.
Index: ADA-07043
Index: ADA-07043
DRV8874 - single channel 37V/2.1A motor driver - Pololu 4035
Single-channel DC motor driver from Pololu equipped with the DRV8874 system. It is supplied with the voltage from 4.5 V to 37 V. The continuous current per channel is 2.1...
Index: PLL-21359
Index: PLL-21359
MP6550 - single-channel motor controller 22V/1,7A - Pololu 4733
Driver based on the MP6550 chip that allows you to control the speed and direction of one DC motor. It works with motors powered by a voltage of 1.8 V to 22 V , with a...
Index: PLL-22594
Index: PLL-22594
L298N - two-channel motor controller - 12V/2A
Module with dual-channel driver for DC motors L298. It is supplied with the voltage up to 12 V. Maximum current per channel is 2 A. The system has embedded voltage regulator 5...
Index: MOD-03164
Index: MOD-03164
The General Driver board is a multifunctional driver based on the ESP32-WROOM-32 module, which offers a wide range of possibilities and allows you to expand the project with...
Index: WSR-22832
Index: WSR-22832
TB6612FNG - two-channel motor controller 13.5V / 1A - Pololu 713
Pololu module with dual channel DC motor driver. It is powered from 4.5 V to 13.5 V. The continuous current per channel is 1 A, when both channels are connected the value...
Index: PLL-00032
Index: PLL-00032
DRV8833 - two-channel motor controller 10,8V/1,2A - Pololu 2130
Two-channel driver for DC motors. Continuous current per channel 1.2 A (temporary up to 2 A). Power supply from 2.7 to 10.8 V.
Index: PLL-00546
Index: PLL-00546
Motor Driver HAT TB6612FNG - dual channel 12V/3A for Raspberry Pi - SB Components SKU21789
Overlay for Raspberry Pi equipped with 40-pin GPIO connector, including model 4B / 3B+ / 3B. HAT features a TB6612FNG dual channel DC motor driver, operating from 6 V to...
Index: SBC-20401
Index: SBC-20401
- On sale!
- Promotion
See also
Integrated modules for motor control
Motor drivers modules are very popular in electronics, in particular to the design of prototype devices and for fans. Thanks to an integrated design module contains all the necessary circuits and discrete elements on a small printed circuit Board. Due to this the controller for this connection, only need a power source, the engine and, of course, control signals, for example, a computer or a microcontroller. Integrated motor drivers can be implemented in various designs such as compact robots or machines with small numbers.
A wide range of modules for motor control
The motors are typical a number of options under which you need to find motor drivers modules. In addition to intuitively understand the number of channels also have other settings, of which the most important is the voltage and operating current. Voltage range of work suggests that can be the rated voltage of the motors controlled by this module. Operating current specyfikuje the maximum allowable current supported by this driver, so it is important that the current consumption of this engine was no more than this value. Excess of maximum permissible parameters of the driver can fail the entire system.
Multi-channel drivers for use with minikomputerami
The assortment of our shop you can find motor drivers β multi-channel modules equipped with a dedicated interface for connection to PC jednopΕytkowych such as a popular series of Raspberry Pi or Micro:bit for tile prototypes in the form shielda in the format of Arduino. Due to the fact that these modules can be connected to a wide range of minicomputers to focus on the fact that the format of the Arduino, as well as 40-pin connector of the Raspberry Pi, it's widely accepted in this sector, standards of signal receiving modules for developers.
