Motors - Strona 17
Micro motor N20-BT30 150:1 150RPM - 9V
The N20 series miniature motor with 150:1 gearing, has 150 RPM and the torque is equal to 1.7 kg*cm (0.167 Nm). The supply voltage ranges from 3 V to 9 V.Linear Actuator LAD 500N 15mm/s 12V - 30cm stroke
Linear actuator powered by 12 V with IP65 protection class and 30 cm extension . Load capacity is 500 N (50 kg). The actuator operates at 15 mm/sec. It has a limit switch...Grove - Fan with DC Motor and Controller v.1.1
Fan of soft material, with a DC motor and a controller, based on ATmega168. The board has additional pins, for example for the servo connection.37Dx50L Motor with 10:1 Gear 24V 1000RPM - Pololu 4689
Polol electric motor with 10:1 gearbox. Powered by 24 V DC , its speed is 1000 rpm and torque is 5.5 kg*cm . It takes up to approx. 100 mA without load and up to 3000 mA...DC motor with 60:1 gear 6V 130RPM
DC motor with 60:1 gear ratio. It is powered with the voltage of 6 V with an average current consumption of 85 mA. It generates 130 revolutions per minute , its torque is...37Dx57L Motor with 131:1 Gear 24V 79RPM - Pololu 4686
Polol branded DC electric motor. Powered by 24 V , the average current consumption is 100 mA, while with the shaft stopped it is 3000 mA. The speed is 79 rpm and the torque...DC motor with 60:1 gear 6V 100RPM
DC motor with 60:1 gear ratio. It is powered with a voltage of 6 V with an average current consumption of 66 mA. It generates 100 revolutions per minute , its torque is 5.8...Linear Actuator LA50P 2000N 50mm/s 12V with potentiometer - stroke 15cm
Linear actuator with potentiometer . Powered by 12 V. Permissible unit load is 200 kg (2000 N) . The maximum extension is 15 cm, and two limit switches provide protection...