Filament Print-Me Swift PETG 1,75mm 1kg - Raspberry Pink
Index: PRI-25015
- New
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
SENSORS - Strona 10
Loading...
AltIMU-10 v5 - gyroscope, accelerometer, compass and I2C 3-5V altimeter - Pololu 2739
Sensor for measuring acceleration, magnetic field, angular speed and altitude. It is a combination of 3-axis accelerometer and gyroscope LSM6DS33, LIS3MDL magnetometer and...
Index: PLL-05728
Index: PLL-05728
Grove - a set of 5 female-female 4-pin - 2mm/20cm cables without latch
A set of five 4-pin cables Grove, raster 2 mm. They are used to connect Grove sensors with Base Shield Board. Cable length is 20cm. Version without a latch.
Index: SEE-04395
Index: SEE-04395
Photoresistor analog - Iduino SE012
Module with photoresistor for Arduino. It is controlled via an analog signal, powered with the voltage from 3.3 V to 5 V.
Index: DNG-11885
Index: DNG-11885
Tensometric beam NA27 5kg (50N)
Strain-gauge beam operating in the range of up to 5 kg (approx. 50 N). The smallest version is used, for example, in kitchen scales, portable scales. The connecting cable...
Index: SES-03099
Index: SES-03099
Distance sensor, reflective - receiver + transmiter IR - 3.3V / 5V - 40cm - Iduino ST1081
The reflective module with a transmitter and an infrared receiver, equipped with a digital output. It works with a voltage from 3.3 V to 5 V. It enables the detection of...
Index: OST-14256
Index: OST-14256
Laser distance sensor Lidar TFMini Plus UART / I2C - 12m
Precise, laser distance sensor operating in the range from 0.1 to 12 m with an accuracy of 0,05 m. The supply voltage is 5 V. The device communicates using the UART and I2C...
Index: BEN-13634
Index: BEN-13634
Module with Hall sensor - Iduino SE014
The module with the Hall sensor, the detection range of the magnetic field is regulated with the potentiometer. It has a built-in digital and analog connector. Powered with the...
Index: OST-14293
Index: OST-14293
Water level sensor - 10W float reed switch - 92mm
The sensor allows you to control the water level in the tank. It consists of a float which under the influence of increasing the fluid volume, rises, causing a short circuit of...
Index: DNG-11432
Index: DNG-11432
Thermometer with LCD display from -50 °C to 100 °C - white
Digital thermometer for mounting on a panel, the LCD display. It works in the range from -50 °C to 100 °C. The probe is on a wire with a length of 1 m. The device is powered by...
Index: SES-03100
Index: SES-03100
Reed switch normally - plastic 14,5mm
Reed contact in plastic straight housing, 14.5 mm long.
Index: MOD-09465
Index: MOD-09465
Soil moisture sensor with 12V relay - HC-13
The sensor to determine the moisture level of the soil. When it exceeds the level set by the potentiometer, the LED lights up and switched are the contacts oc the relay. The...
Index: MOD-02172
Index: MOD-02172
DFRobot Gravity - pH analog sensor/meter
Analog pH meter with an analgue output. Allows to measure water quality. It has an accuracy of +/- 0.1 pH, which is sufficient for most applications. Equipped with LED, BNC...
Index: DFR-05874
Index: DFR-05874
DFRobot Gravity - vibration sensor
A simple vibration sensor with digital output. It is supplied with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04711
Index: DFR-04711
Pressure sensor cell 50kg - 4pcs.
Pressure sensor reduces its resistance when the force put to the square tip, increases. The sensor is in the form of a rectangle with sides of 33 mm. The set has 4 pieces,...
Index: MOD-07267
Index: MOD-07267
Liquid flow sensor YF-S402 6l / min - 1/8" thread
Sensor of liquid flow operating in the range from 0.3 to 6 liters per minute. Is supplied with the voltage from 3,5 V to 24 V, the output signal is a frequency proportional to...
Index: SEE-04410
Index: SEE-04410
Waterproof probe with LM35DZ - 1m analog temperature sensor
Waterproof probe is equipped with an analog thermometer DS18B20 with a cable with the length of 1 meter.
Index: SES-04815
Index: SES-04815
Temperature sensor DS18B20 - black module - Iduino SE042
Module with digital thermometer DS18B20+, equipped with 1-wire interface. The measuring range is from -55 °C to 125 °C, the supply voltage is 5 V.
Index: GRL-12512
Index: GRL-12512
Force sensor round 15mm - short connector - Pololu 2728
Pressure sensor reduces its resistance when the force put to the round tip, increases. The s ensor with the short connector, round, with about 15mm diameter.
Index: PLL-02348
Index: PLL-02348
Tilt/shock sensor - Waveshare 9536
The tilt sensor detects changes in position. It can work as a shock sensor. It works with voltages from 3 V to 5.5 V.
Index: WSR-04497
Index: WSR-04497
Waterproof probe with temperature sensor DS18B20 - 2m - brown - silicone
Waterproof probe is equipped with a digital thermometer DS18B20 with cable with the length of 2 meters. Version with silicone wire is characterized by the greater strength.
Index: DNG-10933
Index: DNG-10933
Sharp GP2Y0A60SZLF - analog distance sensor 10-150cm 5V - Pololu 2474
Analog distance sensor (rangefinder) Sharp GP2Y0A41SK0F with PCB Pololu stand. It detects objects in the range from 10 to 150 cm.
Index: PLL-02707
Index: PLL-02707
- On sale!
- Promotion
Maker Soil Moisture - capacitive soil moisture sensor
Cytron Maker Soil Moisture sensor is a sensor that can measure soil water content and connect with various microcontrollers. The sensor has an analog output in the form of a...
Index: CTN-21207
Index: CTN-21207
IR transmitter from Grove, emitting light with a wavelength of 940 nm. It works with a supply voltage from 3.3 V to 5.0 V. Sensor provides a signal to a distance of 10...
Index: SEE-04418
Index: SEE-04418
DFRobot Gravity: Analog AC Current Sensor SCT 013-020 - to 20A
The sensor measures the intensity of the current flowing in a pipeline without its opening. Measurement occurs through the insulation on a single wire, and the output is the...
Index: DFR-06932
Index: DFR-06932