- On sale!
- Promotion
PicoBricks IoT Expert Kit - development kit for Raspberry Pi Pico
Index: RBI-22768
- Reduced price
- Promotion
- Reduced price
- Promotion
3D printer Creality Sermoon V1 Pro XY-axis limit switch kit
Index: CRL-21517
- Reduced price
- Promotion
SENSORS - Strona 23
Loading...
Gravity: Analog Infrared CO2 Sensor For Arduino (0~50000 ppm)
High-precision sensor that measures the concentration of CO2 (carbon dioxide) in the air. It is equipped with an UART interface, it works with a voltage from 4.5 V to 5.5 V. It...
Index: DFR-08110
Index: DFR-08110
Grove - 2-channels relay with optoisolation - 10A/250VAC - coil 5V + clear case
The module has two SRD-05 relays with the coil powered with the voltage of 5 V with optical insulation of input and mounting holes. The system allows you to control...
Index: SEE-12626
Index: SEE-12626
Grove - MCP9808 - temperature sensor - I2C
Temperature sensor MCP9808 is characterized by high accuracy. Its measuring range is from -40°C pd 125°C. The measuring accuracy is 0,25°C. It communicates through the I2C...
Index: SEE-15183
Index: SEE-15183
Rubber conductive rubber cable for measuring the tensile force - Adafruit 519
Conductive rubber wire with a diameter of 2 mm and a length of 1 meter. It is used to measure the stretching strength. During the stretching of the element, its resistance...
Index: ADA-06549
Index: ADA-06549
BleBox AirSensor - wireless PM10 and PM2.5 air quality sensor
Complete module for detecting the presence of harmful dust inside the house as well as outdoors. It detects PM10 and PM2.5 dust. It can be supplied with voltage from 12V to 24V...
Index: BOX-11562
Index: BOX-11562
- Reduced price
- Promotion
Module with LM35 temperature sensor
The module with analog temperature sensor LM35 . Powered with the voltage of the 5 V. It can read the temperature in the range from -55°C to 150°C with the accuracy of up to...
Index: OST-14288
Index: OST-14288
DFRobot Gravity - DS18B20 temperature sensor
Digital temperature sensor DS18B20 with the Gravity interface compatible with Arduino. It works in the range from -55 °C to 125 °C. It is powered with the voltage from 3.3 V...
Index: DFR-11281
Index: DFR-11281
Fermion - 3-Axis Accelerometer - I2C LIS2DW12 - DFRobot SEN0405
Fermion series module with powerful 3-axis accelerometer LIS2DW12 , manufactured by DFRobot. It features low power consumption (50 nA) , as well as low noise. The module...
Index: DFR-19909
Index: DFR-19909
3D printer Creality Sermoon V1 Pro XY-axis limit switch kit
XY axis limit switch, protecting against exceeding the maximum travel range. Used in Sermoon V1, Sermoon V1 Pro and Sermoon V2 3D printers. The sensor is mounted on a PCB ,...
Index: CRL-21517
Index: CRL-21517
- Reduced price
- Promotion
Laser distance sensor Lidar Lite v3 I2C/PWM - 40m - SparkFun SEN-14032
Accurate, laser distance sensor operating in the range from 0 to 40 m with an accuracy of 0.025 m. The supply voltage is from 4.75 V up to 5.5 V. The device is communicating...
Index: SPF-07410
Index: SPF-07410
Grove - SI1151 solar light sensor
The Grove module based on the SI1151. Multi-channel, digital light sensor to detect visible light and infrared light. It is working with voltage from 3 V to 5.5 V. It...
Index: SEE-11353
Index: SEE-11353
Gravity - I2C/UART connection cable set - PH2.0-female - 30cm - 5pcs - DFRobot FIT0916-F
The kit includes 5 pieces of 30 cm long connection cables from DFRobot. On one side they are terminated with a female PH2.0 connector compliant with the Gravity standard,...
Index: DFR-22467
Index: DFR-22467
DFRobot Gravity - IR receiver 38kHz
The IR receiver from the Gravity series, operating at a frequency of 38 kHz with a voltage of 5 V. The module allows to receive commands from the IR transmitter. The...
Index: DFR-11267
Index: DFR-11267
Adjustable motion PIR sensor with an interface compatible with the Grove series. It's a simple to use passive infrared sensor. Object detection is indicated digitally - via...
Index: SEE-13813
Index: SEE-13813
PIR motion detector MCE32 220-240V
The PIR sensor detects movement. It is used to automatically control lighting or other devices. The sensor works on infrared. It is activated by the movement of a heat emitting...
Index: MOD-05185
Index: MOD-05185
Velleman VMA407 - module with photodiode + cable - analog
Module with photodiode for Arduino. Controlled by an analog signal, powered from 3.3 V to 5 V . Also includes 3-pin cable.
Index: VEL-13031
Index: VEL-13031
- Reduced price
- Promotion
Fingerprint reader - with STM32F205 32-bit - Waveshare 8552
Module with fingerprint reader communicating through serial interface UART (RX, TX). It has a memory where you can store up to 1000 fingerprints of different people and export...
Index: WSR-05622
Index: WSR-05622
Color sensor TCS34725 I2C - Waveshare 16131
The Waveshare color sensor based on the sensor TCS34725 with a LED backlight and a built-in IR filter. Communication is carried out via the I2C bus.
Index: WSR-14429
Index: WSR-14429
3D printer CR-200B limit switch
Limit switch module used in Creality CR-200B 3D printer. The product consists of the actual limit sensor and plug - soldered into the board . It is an original printer...
Index: CRL-20485
Index: CRL-20485
- On sale!
- Promotion
DSM501A - PM2.5 dust sensor - 5V PWM
Sensor of dust allows you to monitor the purity of the air. It is equipped with a sensor that could detect particles with a diameter above 1 µm, for example, cigarette smoke....
Index: MOD-07560
Index: MOD-07560
Grove - LCD display 2x16 characters with RGB backlight
LCD display 2x16 characters with backlight in any color palette RGB. Communicates with the two-wire I2C bus. It is supplied with the voltage from 3.3 V to 5 V. T he kit...
Index: SEE-11326
Index: SEE-11326
Flame sensor - 760-1100nm - Iduino SE060
The sensor used to detect fire. It is powered with the voltage from 3.3 V to 5 V. The range of the detected wave is from 760 nm to 1100 nm, detection angle is 60 °. The...
Index: OST-14255
Index: OST-14255
- Reduced price
- Promotion
Pressure and temperature sensor DPS310 with Grove connector. The measuring range of pressure is from 300 hPa to 1200 hPa and temperatures from -40°C to 85°C. The accuracy...
Index: SEE-16091
Index: SEE-16091
Grove - mini limit sensor with roller
Module from the Grove series equipped with a limit switch with lever ended with roller. Working voltage is 3.3 V and 5 V. T he kit includes a cable adapted to Seeedstudio Base...
Index: SEE-11335
Index: SEE-11335