- On sale!
- Promotion
- New
- Reduced price
- Promotion
- Reduced price
- Promotion
Grove modules - Strona 4
Loading...
Grove - MMA7660FC 3-axis digital accelerometer I2C
Module with 3-axis accelerometer based on MMA7660FC chip with digital I2C output and Grove connector. The MEMS sensor has a low power consumption and low profile. The module...
Index: SEE-15444
Index: SEE-15444
- Reduced price
- Promotion
Grove - module cover 1x2 blue - 4pcs.
Shield for the modules from Grove series in green color with size of 50 x 25 x 13 mm. It is also compatible with Lego and Makeblock. Allows you to mount two small or one large...
Index: SEE-13342
Index: SEE-13342
Grove - 10kΩ linear sliding potentiometer
Sliding linear potentiometer with a resistance of 10 ohms. Itas a 4-pin Grove connector. The kit includes a cable adapted to Seeedstudio Base Shield v2.0.
Index: SEE-04436
Index: SEE-04436
A small micro servo with a Grove connector that allows direct connection to a Base Shield plate. Powered from 4.8 V to 6 V, torque is 1.8 kg*cm and speed is 0.10 s/60°. The...
Index: SEE-15326
Index: SEE-15326
Grove - Grove-4pin - BLS connector - extension from M5Stack - 10pcs.
The module has a Grove type connector on one side and a 4-pin connector with a 2.54 mm pitch on the other side. It is used as an auxiliary element when some sensors of...
Index: MSS-19421
Index: MSS-19421
Grove - RS-06WD reflectance sensor v1.1
Module from the Grove is equipped with the reflective sensor RS-06WD. It consists of LED emitting the infrared light and phototransistor of high sensitivity. It is supplied...
Index: SEE-11331
Index: SEE-11331
433 MHz RFM95 radio module of the long range (Long Range: LoRa). It allows for data transmission at the distance of up to 500 m using a piece of wire as an antenna. It a lso...
Index: SEE-09086
Index: SEE-09086
- Reduced price
- Promotion
Grove - RGB LED v2.0 - module with RGB diode
Module with RGB diode from Grove. It a llows you to control RGB diode using the digital pins of the microcontroller, and simultaneous connection of even 1024 modules using...
Index: SEE-11299
Index: SEE-11299
Grove - heart rate sensor with a clip on the ear
Set for monitoring the heart rate, contains an ear clip with a wire and receiver module. The results can be displayed on the monitor through a serial port. The supply voltage...
Index: SEE-04409
Index: SEE-04409
Grove - BME280 - humidity, temperature and pressure sensor 110kPa I2C 3-5V
The Grove module is equipped with a humidity, temperature and pressure sensor powered with the voltage of 3.3 V to 5 V with I2C and SPI interface. Measuring range: temperature:...
Index: SEE-11355
Index: SEE-11355
Totem Rack for Arduino, Raspberry and Grove series modules - TotemMaker TKM-GR1
The Totem Rack is a frame for holding electronic modules , which significantly facilitates their further prototyping . The elements are mounted at an angle of 45 degrees...
Index: TOT-21323
Index: TOT-21323
Grove - LCD display 2x16 characters with backlight (Black on Yellow)
Monochrome 2 x 16 character LCD display with high brightness backlight from Grove. The module communicates with the control board via the two-row I2C bus. The screen is powered...
Index: SEE-14735
Index: SEE-14735
Grove - rotary encoder with a button
Knob in a form of an encoder with a button that allows you to create a simple user interface. The module sends a digital signal to the SIGA and SIGB outputs, depending on the...
Index: SEE-11309
Index: SEE-11309
Grove ESP8285 V2 - WiFi UART module
Grove Wi-Fi module based on a ESP8285 system with built-in TCP/IP and support AT commands. It supports the most popular protection, such as WEP, WPA/WPA2, TKIP, AES and WAPI....
Index: SEE-13241
Index: SEE-13241
Grove - LS06-S ambient light sensor v1.1
Module from the Grove series is equipped with a sensor LS06-S. The s ensor allows to determine the intensity of the light and reflects the analog voltage signal back to...
Index: SEE-13335
Index: SEE-13335
- Reduced price
- Promotion
Grove - VOC and CO2 gas sensor SGP30 - semiconductor MOS - Seeedstudio 101020512
The SGP30 sensor module is used to detect volatile organic compounds (VOC) and carbon dioxide (CO2). It communicates through the I2C interface. On the board there is a...
Index: SEE-15542
Index: SEE-15542
Grove - module cover 1x1 blue - 4pcs.
Shield for the modules from Grove series in blue color with size of 25 x 25 x 13 mm. It is also compatible with Lego and Makeblock. It allows you to mount a small Grove module....
Index: SEE-13339
Index: SEE-13339
Grove - StarterKit v3 - IoT starter package for Arduino
Starter set introducing the world of IoT (Internet of Things) for Arduino boards. The set includes i.a.: sensors of light, touch, temperature, servo, display and many others....
Index: SEE-04445
Index: SEE-04445
- Reduced price
- Promotion
Grove - Sensor for measuring EMG muscle activity
Module from the Grove series that allows you to collect the bioelectric signal generated by the human muscles (EMG). The output is an analog signal that can be read using any...
Index: SEE-11308
Index: SEE-11308
Grove - vibration sensor with piezoelectric membrane
Vibration sensor with flexible plastic piezoelectric sensor LDT0-028. It is supplied with 5V, works with modules from Arduino, Raspberry Pi and other...
Index: SEE-11342
Index: SEE-11342
Grove Creator Kit - Gamma - set of 40 Grove modules to Arduino
Set consisting of 40 modules and cables with Grove interface. It has been designed for creators of all ages, regardless of their level of sophistication and experience with...
Index: SEE-15410
Index: SEE-15410
Grove - 6-axis accelerometer and gyroscope LSM6DS3 - Seeedstudio 105020012
The module is equipped with a 6-axis accelerometer and a gyroscope based on the LSM6DS3 system with a built-in power regulator. It allows to measure 6 sizes: acceleration X,...
Index: SEE-15559
Index: SEE-15559
Grove - set of 5 female-female 4-pin - 2mm / 40cm with latch
A set containing five 4-pin Grove cables with a clip, 40 cm long. The cables are used to connect the sensors to the Grove connector with the base cover.
Index: SEE-15574
Index: SEE-15574
Grove ADS1115 - 4-channel 16-bit ADC for Raspberry Pi - Seeedstudio 103030279
Grove 4-channel 16-bit ADS1115 ADC is an analog-digital converter (ADC) in the form of shield for GPIO connectors of Raspberry Pi. It is 4-channel ADC based on the ADS1115...
Index: SEE-13814
Index: SEE-13814
See also
- RPM sensors
- Twilight sensors
- Tilt sensors
- Accelerometers
- Inductive sensors
- Hall effect sensors
- Oxygen sensors
- Optical sensors
- Resistance sensors
- Door sensors
- Piezoelectric sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Gas sensors
- Limit switches
- Sensors of light and color
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Gravity modules
