BBMagic BBMobile - Bluetooth LE module for Arduino, STM, ARM, AVR
Index: BBM-19294
- On sale!
- Promotion
Filament Polymaker PolySonic High Speed PLA 1,75mm 1kg - Red
Index: PLM-23938
- Reduced price
- Promotion
- Reduced price
- Promotion
Connectors - Strona 14
Loading...
DC 2,1/5,5mm cable 30cm with switch
Cable terminated with a 2.1/5.5 mm plug and socket with a built-in switch. It allows you to disconnect the power supply without removing the power supply from the mains...
Index: KAB-03913
Index: KAB-03913
Crocodile wire - 50cm colored 5pcs
Set of 5 colored wires ended from both sides with the crocodile connectors with the length of 44 mm. Cable length is 50 cm.
Index: KAB-05671
Index: KAB-05671
Assembly bar male 3-pin, raster 5,08mm, angular open
Seperable terminal block, male, angular, 3-pin. Pitch is 5.08 mm. Height is 12 mm.
Index: KAB-07136
Index: KAB-07136
Connection set for ESP32 Thing - 2x 1x20 raster 2,54mm - SparkFun PRT-14311
20-pin female strap compatible with pins in ESP32 Thing and ESP32 Power Control Shield, pins pitch is 2.54 mm. The kit consists of two straps of 1 x 20 pin.
Index: SPF-09499
Index: SPF-09499
Small Alligator Clip cables Velleman CM11N - 50cm - 10pcs
Set of 10 colored wires ended on both sides with crocodile connector. Length of a single element is 50 cm.
Index: VEL-13890
Index: VEL-13890
Module with USB type C connector - vertical connector - SparkFun BOB-23055
Module for Sparkfun with a socket allowing you to connect a USB Type-C plug to any system. It has 7 pins and the pin pitch is 2.54 mm , which means it is compatible with...
Index: SPF-24080
Index: SPF-24080
Female header 1x10 2mm SMD - XBee raster - SparkFun PRT-10030
Single-row strap, female 10 pin. Pitch: 2 mm Mounting: surface SMD. Connector allows you to connect XBee modules.
Index: SPF-03396
Index: SPF-03396
Index: KAB-04966
USB adapter - Ethernet Edimax EU-4208
Adapter allows connection to Fast Ethernet network for devices with no Ethernet port via USB 1.1 and 2.0 slot. Also works with minicomputer Raspberry Pi.
Index: KAB-05523
Index: KAB-05523
Connector 2,54 mm - socket housing 8-pin - 5pcs.
The 8-pin socket's case on the cable, the pitch is 2.54 mm. The kit includes 5 x 8-pin cases.
Index: KAB-06779
Index: KAB-06779
Assembly bar female 8-pin, raster 3,5mm
Seperable terminal block, female, 8-pin. Pitch of 3.5 mm. Height is 11.3 mm. Screw on the flat screwdriver (-).
Index: KAB-07098
Index: KAB-07098
Socket 1x12pin - 2,54mm - long - 5pcs.
Straight goldpin socket equipped with a single row of 12 pins in the pitch of 2.54 mm. Long pins were positioned vertically.
Index: UCC-08510
Index: UCC-08510
Female socket 2x20 raster 2.54mm for Raspberry Pi - angled
40 -pin female angled connector strap used in Raspberry Pi model 4B, 3B+, 3B, 3B, 2, B+, Zero i Zero W. Raster of 2.54 mm.
Index: KAB-08885
Index: KAB-08885
DC 5.5 x 2.5mm socket for housing - plastic - 5pcs
Power DC φ5.5 x 2.5 mm slot for case, made of plastic. The set i ncludes 5 slots φ5.5 x 2.5 mm.
Index: KAB-13678
Index: KAB-13678
Qwiic JST Connector 4-Pin - SMD - vertical - SparkFun PRT-16766
Four-pin JST connector used in SparkFun Qwiic sensors and cables. The socket is intended for self-soldering. Enables vertical insertion of a cable equipped with a Qwiic...
Index: SPF-21291
Index: SPF-21291
Female connector ZIF, FFC/FPC, horizontal 12 pin, raster 0,5 mm, bottom contact
FFC/FPC 12-pin connector, horizontal, pitch of 0.5 mm, bottom contact, surface soldered (SMD).
Index: KAB-02334
Index: KAB-02334
Connector ZIF, FFC/FPC, horizontal 24 pin, raster 0,5 mm, female bottom
FFC/FPC 24-pin connector, horizontal, pitch of 0.5 mm, bottom contact, surface soldered (SMD).
Index: KAB-02337
Index: KAB-02337
Female socket 2x4, 2,54mm raster - 10 pcs.
Double row, female socket. Pitch : 2.54 mm. 10 pcs.
Index: KAB-03425
Index: KAB-03425
Angled D-SUB 25 - female socket
D-SUB DE-15F female socket for the cable is used, for example, as the connector of the parallel LPT port.
Index: KAB-04997
Index: KAB-04997
D-SUB 25 male plug is used, for example, as the connector of the parallel LPT port.
Index: KAB-04998
Index: KAB-04998
SMA female connector for housing - 50Ω
SMA female connector with 50 Ω impedance mounted in housing. Used to connect antennas and receivers.
Index: KAB-06316
Index: KAB-06316
Assembly bar male 4-pin, raster 5,08mm, vertical opened
Seperable terminal block, male, 4-pin. Pitch is 5.08 mm. Height is 12 mm.
Index: KAB-07124
Index: KAB-07124
Socket DC 5.5 x 2.1 mm with terminal connector
DC φ5.5 x 2.1 mm slot (for power supply unit) with a detachable connector that allows you to mount the cable using screwdriver.
Index: KAB-07210
Index: KAB-07210
DFRobot Gravity - adapter with compression connectors
Universal adapter for sensors with 3-pin clamp connector. It can be used with digital and analog modules. The module has a built-in resistor of 10K between AB and AC, which...
Index: DFR-11286
Index: DFR-11286