- New
Connectors - Strona 7
Loading...
Electric self-locking cube 2 pin 2,5mm 250V/10A - 5pcs
A set of five self-locking 2-pin electrical terminal blocks. The terminal blocks connect cables with a voltage of 250 V with a current flow of up to 10 A . The connection pitch...
Index: DNG-19815
Index: DNG-19815
DIY Magnetic Connector - Right Angle Three Contact Pins - Adafruit 5358
Magnetic connectors allow for simple and quick connection of two modules. They were made by Adafruit like MagSafe, a similar solution can be found in MacBooks and the littleBits...
Index: ADA-21438
Index: ADA-21438
USB C plug - magnetic - Akyga AK-AD-68
Magnetic USB C plug by Akyga for magnetic USB cables, which can be permanently installed in the device port. Thanks to it, you can easily connect to charging, for example, a...
Index: RCO-22158
Index: RCO-22158
Raspberry Pi tape - camera 200cm 15 wires 1mm raster
A 200cm long ribbon connecting a Raspberry Pi minicomputer to a dedicated camera . The connector has 15 wires, 1 mm raster.
Index: ODS-03952
Index: ODS-03952
Adapter SATA - Molex. It provides additional Molex connector from the SATA connector. Cable length 15 cm
Index: KAB-04636
Index: KAB-04636
Molex power cord for mini-Molex + Molex - 15cm
Power cable with Molex connectors, 5.08 mm pitch and mini-Molex, 2.54 mm pitch + Molex, 5.08 mm pitch. The cable length is 15 cm.
Index: KAB-04639
Index: KAB-04639
DFRobot Gravity - adapter with compression connectors
Universal adapter for sensors with 3-pin clamp connector. It can be used with digital and analog modules. The module has a built-in resistor of 10K between AB and AC, which...
Index: DFR-11286
Index: DFR-11286
Adapter USB 3.0 A in USB type-C OTG . It allows, for example, to connect a flash memory to the phone.
Index: LEC-14216
Index: LEC-14216
Lanberg RJ45 network connector cat. 6e UTP - 100pcs.
A set of 100 unshielded RJ45 (8P8C ) unshielded throughput network plugs. The plugs are designed mainly for UTP LAN cables. The ends are made of durable, transparent plastic.
Index: IMP-16362
Index: IMP-16362
Index: KAB-00375
- Sale
- SPECIAL OFFERS
Surface mounted socket 1 x RJ45 Lanberg - white
The socket used in high-speed computer networks, equipped with one shielded RJ45 category 5e port. Surface mounted.
Index: ZAS-07478
Index: ZAS-07478
DC 5.5 x 2.1mm socket for case - 12mm - 10 pcs.
Power DC φ5.5 x 2.1 mm slot for case, made of plastic.
Index: KAB-09351
Index: KAB-09351
- Sale
- SPECIAL OFFERS
Female goldpin strip 2x20 raster 2,54mm for Raspberry Pi - without soldering
40-pin goldpin connector strip which doesn't require soldering thanks to the clamps. It is used in Raspberry Pi 3 / 2 /B+ / Zero / Zero V. Raster of 2.54 mm.
Index: PIM-10622
Index: PIM-10622
Connector Set - goldpin 2x20 male, female and mounting device - without soldering
Set of 40-pin goldpin connector strips which don't require soldering thanks to the clamps. They are used in Raspberry Pi 3 / 2 /B+ / Zero / Zero V. Raster of 2.54 mm. The set...
Index: PIM-10624
Index: PIM-10624
Crocodile connector 27mm red - 5pcs
Small crocodile connector with the length of approx. 27 mm with the shield in red. Price is for 5 pieces.
Index: KAB-05636
Index: KAB-05636
Set of crocodile connectors 35mm - 10pcs.
Small crocodile connectors approx. 35 mm long with cap. Set contains 10 pieces in different colours.
Index: DLT-12149
Index: DLT-12149
Mounting element in the form of a female socket with 30 pins in a 2 x 15 pin arrangement. The components are compatible with the BUS socket on the M5Stack Core development...
Index: MSS-19590
Index: MSS-19590
Crocodile cables - 100cm - 2pcs
Wires finished on both sides with the crocodile connectors. Length of a single element is 100 cm. The kit includes two wires with tips in black and red.
Index: KAB-03935
Index: KAB-03935
A straight plug for mounting on the cable. It has the handle facilitating the pulling out of the slot.
Index: KAB-08178
Index: KAB-08178
- Sale
5pin 250V electric cube - orange
The electric 5-pin cube that allows to connect the wires with a voltage of 250 V in a simple way, without the need of using the tools.
Index: LEC-09991
Index: LEC-09991
3pin socket adapter for servo with alligator clips
The cable enables connection of a standard servo to a board, e.g. micro:bit without soldering . It is a simple type of connector that allows you to connect the signal to...
Index: DNG-17687
Index: DNG-17687
DIY Magnetic Connector - Right Angle Three Contact Pins - Adafruit 5360
A set of two magnetic connectors for easy and quick connection of two modules. The connectors were made by Adafruit in the manner of MagSafe. The set includes a male pogo...
Index: ADA-21437
Index: ADA-21437
DIY Magnetic Connector - simple 7-pin magnetic connectors - Adafruit 5468
Magnetic connectors are mounting elements that are very often used during prototyping systems, because they significantly facilitate and accelerate the process of...
Index: ADA-22191
Index: ADA-22191
DC plug 5,5/2,5mm for cable - 10pcs.
DC φ5.5x2.5 mm plug for the cable made of plastic. Plug length: 9.5 mm.
Index: UCC-00413
Index: UCC-00413
- Sale
- SPECIAL OFFERS