- Promotion
Over 500,000 customers already trust us. With us you get:
same-day shipping for products marked “24h shipping”
our own service centre in Poland
30 days to return and free delivery in Poland from PLN 500
4.9/5 on TrustMate and 4.9/5 on Google (almost 4,000 reviews)
VAT invoice, leasing and instalments for businesses
For businesses
individual quote for larger quantities
VAT invoice
For schools and universities
orders based on requests for quotation
help with choosing kits for your lab
Arduino Uno WiFi Rev2 - module ABX00021
Module with microcontroller AVR ATmega4809, equipped with an U-block W102 system for communication with the wi-fi network. Has 48 KB of Flash memory, 6 KB RAM, 14 digital inputs/outputs, 5 of which can be used as PWM channels, 6 analog inputs and popular communication interfaces.
We could not load the price.
The promotional price does not combine with quantity discounts.
Description
Popular version of Arduino Uno board with built-in microcontroller AVR ATmega4809and systemU-block W102 for communication with the wi-fi network. ATmage4809 was equipped with14 digital input/outputs, 5of which can be used as outputsPWM(e.g. for motor control), and6 analog inputs. The system works has clock signal frequency of20 MHz, has48 KB Flash program memory,6 KB RAM SRAM, anda 256 B EEPROM. Tile is equipped with a systemIMU(Inertial Measurement Unit) and a cryptographic moduleECC608.
Built-in module U-block W102 allows you to access wi-fi and that allows you to create a network of IoT (Internet of Things). Arduino Uno wi-fi can be programmed in the same way as the classical plateArduino Uno |

Botland is an official distributor of the Arduino development platform in Poland. We offer a wide choice of boards, modules and accessories from this popular brand, along with tutorials and a knowledge base for users. All Arduino products presented here are original.
Key features
Below are a few features that distinguish modules Arduino compared from the other programmable tiles.
| Name | Description |
|---|---|
Installed bootloader | Thanks to bootloader, for programming the device the only necessities are appropriateUSB cableandsoftware from manufacturer's website. |
Wi-Fi Module | Built-in module U-block W102 allows you to access wi-fi and that allows you to create a network of IoT (Internet of Things). |
Digital I/O | 14 digital inputs/outputs allow, in particular, to control the LEDs, relays and reading the buttons' states. |
Efficiency current | The maximum load current for one I/O is 20 mA (50 mA output 3.3 V). |
Output PWM | 5 outputs PWM allow, for example, to control the motors and brightness of the LEDs. |
Analog inputs | 6 inputs of built-in digital-analog converter with a resolution of 10-bit, support, in particular, sensors with analog output. |
Serial communication | The device supports popular communication interfaces, including UART, I2C and SPI. |
| Special functions | Some of the pins have special functions that a brief description is available inour guide. |
Built-in memory | System Atmega4809 has frequency signal with a frequency of 20 MHz and has 48 KB Flash memory, 256 B EEPROM and 6 KB of RAM SRAM. |
Supply DC connector | To power the Arduino, you can useany power supplywith voltage up to 12V with DC connector 5.5 x 2.1 mm. |
Supply USB port | The tile can be powered from a computer via USB cable, bearing in mind that the maximum load current for the USB port is 500 mA. Arduino has a system that protects the socket from short-circuit and the flow of too high current. |
Connector ICSP | The module has ICSP I/O for connecting an externalAVR programmer. |
Pin IOREF | The IOREF Pin provides direct access to the voltage with which output I/O work. |
Built-in led | The connected led on pin 25 allows debugging simple programs. |
Output 3.3 V | Built-in voltage regulator provides power to external devices with the voltage of 3.3 V with current consumption of 50 mA. |
First run To help you get started with the module, we recommendthe user manual, which will help you with installation and first launch of the Arduino environment. |
Specification
- Supply voltage: 5 V to 12 V
- Microcontroller: ATmega4809
- Maximum clock frequency: 20 MHz
- SRAM: 6 KB
- Flash memory: 48 KB (5 KB is reserved for bootloader)
- EEPROM: 256 B
- Wi-fi module U-block W102:
- I/O Ports: 14
- PWM outputs: 5
- Number of analog inputs: 6 (channels of converter A/C with 10 bit resolution)
- Serial interfaces: UART, SPI, I2C
- External interruptions
- The connected led on pin 25
- USB A connector for programming
- DC connector 5.5 x 2.1 mm for power
- Dimensions: 69 x 53 x 14 mm
- Weight: 25 g
Useful links
| Name | Value |
|---|---|
| Voltage to | 7.0 V |
| Voltage from | 12.0 V |
| Voltage output from | 5.0 V |
| Output voltage to | 5.0 V |
| Nominal output voltage | 5.0 V |
| UC - Microcontroller | ATmega4809 |
| UC - Core | 8-bit AVR |
| UC - EEPROM | 0.25 kB |
| UC - Flash | 48 kB |
| UC - RAM | 6 kB |
| UC - core | 1. Single Core |
| UC - Digital pins | 14 |
| UC - analog in | 6 |
| UC - freq | 20 MHz |
| UC - A/C | 10-bit |
| UC - PWM | 5 |
| UC - WiFi | yes |
| UC - USB | USB B |
| UC - I2C | yes |
| UC - UART | yes |
| UC - Connector | 5V - DC 5.5/2.1mm |
| UC - SPI interface | yes |
| Width | 6 cm |
| Height | 8 cm |
| Depth | 2.5 cm |
| Weight | 0.08 kg |
The full delivery terms are on the page Delivery and payment.
30 days to return, without giving a reason
If the product does not meet your expectations, you have 30 days from receiving the parcel to withdraw from the contract. The product only has to be complete. The right of return belongs to consumers (a purchase unrelated to business activity).
Complaints
If the product turns out to be faulty, you can make a claim under the guarantee or the statutory warranty. We handle claims without delay, at the latest within 14 working days of receiving the report together with the goods.
Question: Hello It is possible to program remotely via wifi without using a cable?
Instructions and documents
GPSR data
We collect and verify reviews with our external partner Trustmate; they come from the post-purchase process.
Products from the same category
See all ›
Arduino Uno WiFi Rev2 - module ABX00021
Ask about the product
Have a question about this product? Send us a message and we will get back to you.
We usually reply within one business day. The answer is sent to the e-mail address you provide.