- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
List of products by brand Pololu - Strona 16
Loading...
MAX14870 - 2-channel motor driver 28V/1,7 A - Shield for Arduino - Pololu 2519
Modul with dual-channel driver of motors MAX14870 working with voltages from 4.5 V to 36 V and current up to 1.7 A per channel (max 2.5 A). The system can be directly connected...
Index: PLL-11843
Index: PLL-11843
QTRX-HD-07A Reflectance Sensor Array: 7-Channel, 4mm Pitch, Analog Output, Low Current - Pololu 4307
Compact strap with seven reflective sensors with the size of 29 x 20 mm. It has digital outputs, is powered with the voltage from 2.9 V to 5.5 V and allows for the adjustment...
Index: PLL-12655
Index: PLL-12655
Large switch Slide MOSFET HP 4,5-40V/16A - with protection before reverse current - Pololu 2815
The executive module with a MOSFET transistor with a pair of channels P to control devices with higher current consumption than allowed by the control system, for example, a...
Index: PLL-05120
Index: PLL-05120
60x8mm Wheels - blue - Pololu 1423
Set of plastic wheels (2 pcs) with rubber tyres for high grip. Suitable for engines with Pololu gearboxes.
Index: PLL-10883
Index: PLL-10883
90x10mm Wheels - red - Pololu 1436
Set of plastic wheels (2 PCs.) with rubber tyres, providing a high adhesion. They are suitable for engines with Pololu gears.
Index: PLL-10889
Index: PLL-10889
Ball Caster 1/2" - metal - Pololu 953
Metal ball in the bowl with a diameter of 1/2 inches, it is ideal to use to support the front of the two-wheeled robot.
Index: PLL-00137
Index: PLL-00137
90x10mm Wheels - blue - Pololu 1438
Set of plastic wheels (2 pcs) with rubber tyres for high grip. Suitable for engines with Pololu gearboxes.
Index: PLL-10890
Index: PLL-10890
MAX14870 - single-channel motor controller 36V/1.7A - Pololu 2961
Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 2.5 A). Supply voltage from 4.5 V to 36 V.
Index: PLL-04200
Index: PLL-04200
Module with dual-channel driver of motors MAX14870 working with voltages from 4.5 V to 36 V and current up to 1.7 A per channel (max 2.5 A). The system can be connected...
Index: PLL-11844
Index: PLL-11844
Sub-micro DC Motor 700:1 90 RPM 0,9 kg*cm - Pololu 2359
Small, cylindrical, coreless motor with planetary gear 700:1 powered from 3 V to 6 V. Speed is 90 rpm, torque 0.9 kg*cm. External diameter is 6 mm, length 21 mm and total...
Index: PLL-05989
Index: PLL-05989
TB9051FTG Hat two-channel driver for motors 28V / 2.6A - shield for Raspberry Pi - Pololu 2761
Module with dual-channel driver of motors TB9051FTG working with voltages from 4.5 V to 28 V and current up to 2,6 A per channel (max 5 A). The system can be connected directly...
Index: PLL-12433
Index: PLL-12433
STSPIN820 Stepper Motor Driver Carrier - Pololu 2878
Stepper motor driver based on the STSPIN820 chip. It is powered from 7 V to 45 V, with maximum current consumption of 0.9 A per coil without heatsink (momentary up to 1.5...
Index: PLL-13682
Index: PLL-13682
TB67S279FTG - Stepper Motor Driver 47V/1,1A - with holders - Pololu 3099
Stepper motor driver based on the chip TB67S279FTG. Powered by a voltage range from 10 V to 47 V, with a maximum current consumption of 2 A per coil. Maximum resolution: 1...
Index: PLL-13681
Index: PLL-13681
HP Motor with 150:1 Gear - Pololu 997
A miniature high-power engine from Pololu with a gear of 150: 1, has 200 rpm, the torque is 2.9 kg * cm (0.284 Nm).
Index: PLL-00723
Index: PLL-00723
Vibration Motor 8x3,4mm - Pololu 1637
Small motor that generates vibrations with an amplitude of 0.75 g. It consumes about 60 mA of current when supplied with 3 V.
Index: PLL-01003
Index: PLL-01003
Trim with QTR-3RC reflective sensors - digital - Pololu 2457
Compact bar with three reflective sensors with the size of 32 x 8 mm. It has analog outputs, it is powered with the voltage of 5 V.
Index: PLL-01731
Index: PLL-01731
MAX14870 - dual-channel motor driver 28V/1,7A - extension for Raspberry Pi 4/3+/3/2/B+ - Pololu 3758
Module with dual-channel driver of motors MAX14870 working with voltages from 4.5 V to 36 V and current up to 1.7 A per channel (max 2.5 A). The system can be connected...
Index: PLL-11845
Index: PLL-11845
Step-Down Voltage Regulator D24V150F12 - 12V, 15A - Pololu 2885
Step-down converter with 12 V output voltage. The maximum current is 15 A. Supply voltage is within a wide range from 14.5 V to 40 V. Module dimensions are 43 x 32 mm.
Index: PLL-07617
Index: PLL-07617
20Dx43L Motor with 63:1 Gear 6V 225RPM double shaft - Pololu 3464
Pololu's motor with 63:1 gearing, generates 225 rpm, torque is 4.3 kg*cm (0.42 Nm). Powered by 6 V, average current consumption is about 200 mA (max. 3200 mA). It has an...
Index: PLL-08252
Index: PLL-08252
RC Switch with MOSFET 30V/15A transistor - Pololu 2803
The module processes the RC signals to a digital on/off statuses. It has a built-in MOSFET transistor which allows for the control of devices with current consumption of up to...
Index: PLL-01931
Index: PLL-01931
MicroUSB power connector with FPF1320 multiplexer - Pololu 2594
Board with microUSB connector works as a power supply multiplexer. System FPF1320 allows you to choose which of the two sources will be connected to the target system. The...
Index: PLL-02140
Index: PLL-02140
Robot Arm Kit - robotic arm for Romi Chassis - Pololu 3550
Set for creating a robotic arm for the Pololu Romi chassis. The arm is equipped with 3 servos to adjust the height of the gripper, control over it and the gripper's blades....
Index: PLL-12846
Index: PLL-12846
Micro Gearmotor HP 30:1 1000RPM with Extended Motor Shaft - Pololu 2212
Pololu's high power miniature motor with 30:1 gearing, has 1000 rpm, torque is 0.57 kg*cm (0.056 Nm). It has an extended shaft to allow the installation of speed sensors.
Index: PLL-00010
Index: PLL-00010
Hexagonal Wheel Adapter - 12mm/6mm - 2pcs. - Pololu 2686
Aluminum adapter converting the 12 mm, hexagonal shaft suitable for different wheels, for 6 mm motor's shaft. The length of the adapter is equal to 20 mm.
Index: PLL-06092
Index: PLL-06092