- New
- New
- New
Electrical Actuator Super Power Jack 2000N 7,5mm/s 12V - 44cm stroke
Index: MOT-05365
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Sale
- Sale
List of products by brand Pololu - Strona 4
Loading...
Wheel 32x7 mm - white - 2 pieces - Pololu 1088
Set of plastic wheels (2 PCs.) with rubber tyres, providing a high adhesion. Suitable for engines with Pololu gears.
Index: PLL-00031
Index: PLL-00031
Pololu 23201a - UART converter - RS-232 with DB9 connector - Pololu 126
RS232 converter connects the logic circuits operating in the range from 3 V to 5.5 V to the COM port running at a higher or negative voltage.
Index: PLL-11112
Index: PLL-11112
MP6500 Stepper Motor Driver Carrier, Digital Current Control (Header Pins Soldered) - Pololu 2969
Stepper motor driver based on MP6500 chip. Powered by a voltage range from 4.5 V to 35 V , with a maximum current consumption of 2 A per coil. Maximum resolution: 1/8 step....
Index: PLL-12843
Index: PLL-12843
STSPIN220 Low-Voltage Stepper Motor Driver Carrier - Pololu 2876
Stepper motor driver powered from 1,8 V to 10 V. Maximum resolution: 1/256 koku. Can operate without heat sink or forced air flow at 1.1 A per phase.
Index: PLL-13822
Index: PLL-13822
DC Motor 37Dx73L with 131:1 Gear 12V 76RPM + encoder CPR 64 - Pololu 4756
A high power Polol engine with a 131:1 gearbox. Its speed is 76 rpm and its torque is 45 kg*cm (4. 41 Nm). It is equipped with a quadrature encoder with a resolution of...
Index: PLL-16026
Index: PLL-16026
25Dx48L Motor with 227:1 Gear 12V 33RPM - Pololu 3233
Polol's engine with a 227:1 transmission generates 33 rpm , torque is 23 kg*cm (2.25 Nm). The motor is supplied with 12V at an average current consumption of 200mA without...
Index: PLL-16382
Index: PLL-16382
NEMA 14 - Aluminium L-type Step Motor Mount - Pololu 2257
Lightweight, aluminum holder for stepper motor NEMA 14. It has slots and mounting holes along with compatible M3 x 5 mm screws.
Index: PLL-03361
Index: PLL-03361
Aluminium Motor Mount 25D - 2pcs. - Pololu 2676
Aluminum, lightweight (8.5 g) mountings for Pololu engines, type 25D. Mountings have the mounting holes for M3 screws. The price includes set of 2 pieces.
Index: PLL-03161
Index: PLL-03161
QTR-1A reflectance sensor - 2pcs. - Pololu 2458
Two modules with QTR reflective sensors. They have an analog output. The supply voltage is 5 V.
Index: PLL-01842
Index: PLL-01842
37Dx52L Motor with 19:1 Gear 24V 530RPM - Pololu 4681
Pololu DC motor with 19:1 gearbox. 540 rpm and 9.5 kg*cm torque. The motor is powered by 24 V , its average current consumption is approx. 100 mA, while with the shaft...
Index: PLL-17537
Index: PLL-17537
MP6500 Stepper Motor Driver Carrier, Digital Current Control (Header Pins Soldered) - Pololu 2967
Stepper motor controller based on MP6500 system. Powered from 4.5 V to 35 V, with a maximum current consumption of 2.5 A per coil. Maximum resolution: 1/8th step. The module...
Index: PLL-12844
Index: PLL-12844
37Dx50L Motor with 10:1 Gear 24V 1000RPM - Pololu 4689
Polol electric motor with 10:1 gearbox. Powered by 24 V DC , its speed is 1000 rpm and torque is 5.5 kg*cm . It takes up to approx. 100 mA without load and up to 3000 mA...
Index: PLL-17535
Index: PLL-17535
Wheel 60x8mm - black - 2pcs. - Pololu 1420
Set of plastic wheels (2 PCs.) with rubber tyres providing a high adhesion. Suitable for engines with Pololu gears.
Index: PLL-00022
Index: PLL-00022
Ball Caster 3/8'' - metal - Pololu 951
Metal ball in the bowl with a diameter of 3/8 inch. It is ideal to use to support the front of the two-wheeled robot.
Index: PLL-00063
Index: PLL-00063
VNH5019 - single-channel 24V / 12A motor controller - Pololu - 1451
ST's VNH5019 module operates from 5.5 V to 24 V. Maximum continuous output current is 12 A (momentary: 30 A).
Index: PLL-00456
Index: PLL-00456
37Dx54L Motor with 70:1 Gear 12V 150RPM - Pololu 4744
Polol' s engine with a 70:1 gearbox . Its torque is 27 kg*cm and its speed is 150 rpm. Powered by 12 V DC . Current consumption is approximately 200 mA during...
Index: PLL-17053
Index: PLL-17053
Large switch Slide MOSFET MP 4,5-40V/8A - with protection before reverse current - Pololu 2814
The executive module with a MOSFET transistor with a pair of channels P to control devices with higher current consumption than allowed by the control system, for example, a...
Index: PLL-05119
Index: PLL-05119
ACS711EX current sensor ACS711EX -15A to + 15A - Pololu 2452
Current sensor working in the range of +/-15 A based on the Hall effect. The output is an analog voltage. Supply voltage is from 3.0 V to 5.5 V.
Index: PLL-01690
Index: PLL-01690
Ball Caster 3/4" - metal - Pololu 955
Metal ball in the bowl with a diameter of 0.75 inch. Perfect for supporting the front of a two-wheeled robot.
Index: PLL-00475
Index: PLL-00475
Force sensor round 15mm - short connector - Pololu 2728
Pressure sensor reduces its resistance when the force put to the round tip, increases. The s ensor with the short connector, round, with about 15mm diameter.
Index: PLL-02348
Index: PLL-02348
DC Motor 37Dx73L with 100:1 Gear 12V 100RPM + encoder CPR 64 - Pololu 4755
Polol's 100:1 gearbox motor . 100 rpm and 34 kg*cm (3.33 Nm) torque . The motor is powered by 12 volts and has a current capacity of 200 mA without load and 5 .5A...
Index: PLL-16480
Index: PLL-16480
Step-Up Voltage Regulator U1V11A - 2-5V 1,2A - Pololu 2560
Step-up converter with adjustable output voltage from 2 V to 5.25 V. Maximum input current up to 1,2 A. Supply voltage in the range 0.5 V - 5.5 V. The system has a standby mode.
Index: PLL-01895
Index: PLL-01895
Step-Down Voltage Regulator D24V25F3 - 3,3V 2,5A - Pololu 2849
Step-down converter with 3.3 V output voltage. The maximum current is 2.5 A. The supply voltage is in the wide range from 4.5 V to 38 V. The module dimensions are 18 x 18 mm.
Index: PLL-03155
Index: PLL-03155
MP6500 - stepper motor driver 35V / 2.5A - with analog current control - Pololu 2966
Stepper motor driver based on MP6500 chip . Powered by a voltage range of 4.5 - 35 V, with a maximum current consumption of 2.5 A per coil. Maximum resolution: 1/8 step. The...
Index: PLL-10881
Index: PLL-10881